Data Types ---------- FB_ATM_MFX ^^^^^^^^^^ .. list-table:: :header-rows: 1 :align: center * - Record - Type - Description - Pragma * - $(PREFIX):MMS:STATE:01:ACCL - ao - Acceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:01:ACCL_RBV - ai - Acceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:01:DCCL - ao - Deceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:01:DCCL_RBV - ai - Deceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:01:DELTA - ao - Max deviation from position at this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):MMS:STATE:01:DELTA_RBV - ai - Max deviation from position at this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):MMS:STATE:01:ENCODER_RBV - longin - Encoder count associated with this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: input * - $(PREFIX):MMS:STATE:01:LOCKED_RBV - bi - TRUE if state is immutable - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):MMS:STATE:01:MOVE_OK_RBV - bi - TRUE if the move would be safe - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):MMS:STATE:01:NAME_RBV - waveform - Name of this position state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: input * - $(PREFIX):MMS:STATE:01:SETPOINT - ao - Axis position associated with this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:01:SETPOINT_RBV - ai - Axis position associated with this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:01:VALID_RBV - bi - TRUE if this is a real state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):MMS:STATE:01:VELO - ao - Speed at which to move to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:01:VELO_RBV - ai - Speed at which to move to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:02:ACCL - ao - Acceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:02:ACCL_RBV - ai - Acceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:02:DCCL - ao - Deceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:02:DCCL_RBV - ai - Deceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:02:DELTA - ao - Max deviation from position at this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):MMS:STATE:02:DELTA_RBV - ai - Max deviation from position at this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):MMS:STATE:02:ENCODER_RBV - longin - Encoder count associated with this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: input * - $(PREFIX):MMS:STATE:02:LOCKED_RBV - bi - TRUE if state is immutable - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):MMS:STATE:02:MOVE_OK_RBV - bi - TRUE if the move would be safe - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):MMS:STATE:02:NAME_RBV - waveform - Name of this position state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: input * - $(PREFIX):MMS:STATE:02:SETPOINT - ao - Axis position associated with this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:02:SETPOINT_RBV - ai - Axis position associated with this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:02:VALID_RBV - bi - TRUE if this is a real state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):MMS:STATE:02:VELO - ao - Speed at which to move to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:02:VELO_RBV - ai - Speed at which to move to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:03:ACCL - ao - Acceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:03:ACCL_RBV - ai - Acceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:03:DCCL - ao - Deceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:03:DCCL_RBV - ai - Deceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:03:DELTA - ao - Max deviation from position at this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):MMS:STATE:03:DELTA_RBV - ai - Max deviation from position at this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):MMS:STATE:03:ENCODER_RBV - longin - Encoder count associated with this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: input * - $(PREFIX):MMS:STATE:03:LOCKED_RBV - bi - TRUE if state is immutable - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):MMS:STATE:03:MOVE_OK_RBV - bi - TRUE if the move would be safe - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):MMS:STATE:03:NAME_RBV - waveform - Name of this position state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: input * - $(PREFIX):MMS:STATE:03:SETPOINT - ao - Axis position associated with this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:03:SETPOINT_RBV - ai - Axis position associated with this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:03:VALID_RBV - bi - TRUE if this is a real state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):MMS:STATE:03:VELO - ao - Speed at which to move to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:03:VELO_RBV - ai - Speed at which to move to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:04:ACCL - ao - Acceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:04:ACCL_RBV - ai - Acceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:04:DCCL - ao - Deceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:04:DCCL_RBV - ai - Deceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:04:DELTA - ao - Max deviation from position at this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):MMS:STATE:04:DELTA_RBV - ai - Max deviation from position at this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):MMS:STATE:04:ENCODER_RBV - longin - Encoder count associated with this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: input * - $(PREFIX):MMS:STATE:04:LOCKED_RBV - bi - TRUE if state is immutable - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):MMS:STATE:04:MOVE_OK_RBV - bi - TRUE if the move would be safe - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):MMS:STATE:04:NAME_RBV - waveform - Name of this position state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: input * - $(PREFIX):MMS:STATE:04:SETPOINT - ao - Axis position associated with this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:04:SETPOINT_RBV - ai - Axis position associated with this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:04:VALID_RBV - bi - TRUE if this is a real state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):MMS:STATE:04:VELO - ao - Speed at which to move to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:04:VELO_RBV - ai - Speed at which to move to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:05:ACCL - ao - Acceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:05:ACCL_RBV - ai - Acceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:05:DCCL - ao - Deceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:05:DCCL_RBV - ai - Deceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:05:DELTA - ao - Max deviation from position at this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):MMS:STATE:05:DELTA_RBV - ai - Max deviation from position at this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):MMS:STATE:05:ENCODER_RBV - longin - Encoder count associated with this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: input * - $(PREFIX):MMS:STATE:05:LOCKED_RBV - bi - TRUE if state is immutable - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):MMS:STATE:05:MOVE_OK_RBV - bi - TRUE if the move would be safe - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):MMS:STATE:05:NAME_RBV - waveform - Name of this position state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: input * - $(PREFIX):MMS:STATE:05:SETPOINT - ao - Axis position associated with this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:05:SETPOINT_RBV - ai - Axis position associated with this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:05:VALID_RBV - bi - TRUE if this is a real state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):MMS:STATE:05:VELO - ao - Speed at which to move to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:05:VELO_RBV - ai - Speed at which to move to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:06:ACCL - ao - Acceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:06:ACCL_RBV - ai - Acceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:06:DCCL - ao - Deceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:06:DCCL_RBV - ai - Deceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:06:DELTA - ao - Max deviation from position at this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):MMS:STATE:06:DELTA_RBV - ai - Max deviation from position at this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):MMS:STATE:06:ENCODER_RBV - longin - Encoder count associated with this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: input * - $(PREFIX):MMS:STATE:06:LOCKED_RBV - bi - TRUE if state is immutable - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):MMS:STATE:06:MOVE_OK_RBV - bi - TRUE if the move would be safe - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):MMS:STATE:06:NAME_RBV - waveform - Name of this position state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: input * - $(PREFIX):MMS:STATE:06:SETPOINT - ao - Axis position associated with this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:06:SETPOINT_RBV - ai - Axis position associated with this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:06:VALID_RBV - bi - TRUE if this is a real state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):MMS:STATE:06:VELO - ao - Speed at which to move to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:06:VELO_RBV - ai - Speed at which to move to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - $(PREFIX):MMS:STATE:BUSY_RBV - bi - $(SYMBOL).fbStates.bBusy - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | field: ONAM True | field: ZNAM False | io: input * - $(PREFIX):MMS:STATE:DONE_RBV - bi - $(SYMBOL).fbStates.bDone - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | field: ONAM True | field: ZNAM False | io: input * - $(PREFIX):MMS:STATE:ERR_RBV - bi - $(SYMBOL).fbStates.bError - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | field: ONAM True | field: ZNAM False | io: input * - $(PREFIX):MMS:STATE:ERRID_RBV - longin - $(SYMBOL).fbStates.nErrorId - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | io: input * - $(PREFIX):MMS:STATE:ERRMSG_RBV - waveform - $(SYMBOL).fbStates.sErrorMessage - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | io: input * - $(PREFIX):MMS:STATE:GET_RBV - mbbi - $(SYMBOL).fbStates.enumGet - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | io: input * - $(PREFIX):MMS:STATE:RESET - bo - $(SYMBOL).fbStates.bReset - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | field: ONAM True | field: ZNAM False | io: output * - $(PREFIX):MMS:STATE:RESET_RBV - bi - $(SYMBOL).fbStates.bReset - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | field: ONAM True | field: ZNAM False | io: output * - $(PREFIX):MMS:STATE:SET - mbbo - $(SYMBOL).fbStates.enumSet - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | io: output * - $(PREFIX):MMS:STATE:SET_RBV - mbbi - $(SYMBOL).fbStates.enumSet - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | io: output * - $(PREFIX):STC:01:CONN_RBV - bi - $(SYMBOL).fbThermoCouple1.bConnected - | field: ONAM Connected | field: ZNAM Disconnected | io: input * - $(PREFIX):STC:01:ERR_RBV - bi - $(SYMBOL).fbThermoCouple1.bError - | field: ONAM True | field: ZNAM False | io: input * - $(PREFIX):STC:01:TEMP_RBV - ai - $(SYMBOL).fbThermoCouple1.fTemp - | field: EGU C | field: PREC 2 | io: input FB_MFX_ATM_States ^^^^^^^^^^^^^^^^^ .. list-table:: :header-rows: 1 :align: center * - Record - Type - Description - Pragma * - $(PREFIX):01:ACCL - ao - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):01:ACCL_RBV - ai - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):01:DCCL - ao - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):01:DCCL_RBV - ai - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):01:DELTA - ao - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):01:DELTA_RBV - ai - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):01:ENCODER_RBV - longin - Encoder count associated with this state - | expand: %.2d | io: input * - $(PREFIX):01:LOCKED_RBV - bi - TRUE if state is immutable - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):01:MOVE_OK_RBV - bi - TRUE if the move would be safe - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):01:NAME_RBV - waveform - Name of this position state - | expand: %.2d | io: input * - $(PREFIX):01:SETPOINT - ao - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):01:SETPOINT_RBV - ai - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):01:VALID_RBV - bi - TRUE if this is a real state - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):01:VELO - ao - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):01:VELO_RBV - ai - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):02:ACCL - ao - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):02:ACCL_RBV - ai - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):02:DCCL - ao - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):02:DCCL_RBV - ai - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):02:DELTA - ao - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):02:DELTA_RBV - ai - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):02:ENCODER_RBV - longin - Encoder count associated with this state - | expand: %.2d | io: input * - $(PREFIX):02:LOCKED_RBV - bi - TRUE if state is immutable - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):02:MOVE_OK_RBV - bi - TRUE if the move would be safe - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):02:NAME_RBV - waveform - Name of this position state - | expand: %.2d | io: input * - $(PREFIX):02:SETPOINT - ao - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):02:SETPOINT_RBV - ai - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):02:VALID_RBV - bi - TRUE if this is a real state - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):02:VELO - ao - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):02:VELO_RBV - ai - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):03:ACCL - ao - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):03:ACCL_RBV - ai - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):03:DCCL - ao - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):03:DCCL_RBV - ai - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):03:DELTA - ao - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):03:DELTA_RBV - ai - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):03:ENCODER_RBV - longin - Encoder count associated with this state - | expand: %.2d | io: input * - $(PREFIX):03:LOCKED_RBV - bi - TRUE if state is immutable - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):03:MOVE_OK_RBV - bi - TRUE if the move would be safe - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):03:NAME_RBV - waveform - Name of this position state - | expand: %.2d | io: input * - $(PREFIX):03:SETPOINT - ao - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):03:SETPOINT_RBV - ai - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):03:VALID_RBV - bi - TRUE if this is a real state - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):03:VELO - ao - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):03:VELO_RBV - ai - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):04:ACCL - ao - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):04:ACCL_RBV - ai - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):04:DCCL - ao - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):04:DCCL_RBV - ai - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):04:DELTA - ao - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):04:DELTA_RBV - ai - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):04:ENCODER_RBV - longin - Encoder count associated with this state - | expand: %.2d | io: input * - $(PREFIX):04:LOCKED_RBV - bi - TRUE if state is immutable - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):04:MOVE_OK_RBV - bi - TRUE if the move would be safe - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):04:NAME_RBV - waveform - Name of this position state - | expand: %.2d | io: input * - $(PREFIX):04:SETPOINT - ao - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):04:SETPOINT_RBV - ai - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):04:VALID_RBV - bi - TRUE if this is a real state - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):04:VELO - ao - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):04:VELO_RBV - ai - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):05:ACCL - ao - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):05:ACCL_RBV - ai - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):05:DCCL - ao - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):05:DCCL_RBV - ai - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):05:DELTA - ao - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):05:DELTA_RBV - ai - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):05:ENCODER_RBV - longin - Encoder count associated with this state - | expand: %.2d | io: input * - $(PREFIX):05:LOCKED_RBV - bi - TRUE if state is immutable - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):05:MOVE_OK_RBV - bi - TRUE if the move would be safe - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):05:NAME_RBV - waveform - Name of this position state - | expand: %.2d | io: input * - $(PREFIX):05:SETPOINT - ao - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):05:SETPOINT_RBV - ai - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):05:VALID_RBV - bi - TRUE if this is a real state - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):05:VELO - ao - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):05:VELO_RBV - ai - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):06:ACCL - ao - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):06:ACCL_RBV - ai - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):06:DCCL - ao - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):06:DCCL_RBV - ai - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):06:DELTA - ao - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):06:DELTA_RBV - ai - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):06:ENCODER_RBV - longin - Encoder count associated with this state - | expand: %.2d | io: input * - $(PREFIX):06:LOCKED_RBV - bi - TRUE if state is immutable - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):06:MOVE_OK_RBV - bi - TRUE if the move would be safe - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):06:NAME_RBV - waveform - Name of this position state - | expand: %.2d | io: input * - $(PREFIX):06:SETPOINT - ao - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):06:SETPOINT_RBV - ai - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):06:VALID_RBV - bi - TRUE if this is a real state - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):06:VELO - ao - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):06:VELO_RBV - ai - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):07:ACCL - ao - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):07:ACCL_RBV - ai - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):07:DCCL - ao - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):07:DCCL_RBV - ai - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):07:DELTA - ao - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):07:DELTA_RBV - ai - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):07:ENCODER_RBV - longin - Encoder count associated with this state - | expand: %.2d | io: input * - $(PREFIX):07:LOCKED_RBV - bi - TRUE if state is immutable - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):07:MOVE_OK_RBV - bi - TRUE if the move would be safe - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):07:NAME_RBV - waveform - Name of this position state - | expand: %.2d | io: input * - $(PREFIX):07:SETPOINT - ao - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):07:SETPOINT_RBV - ai - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):07:VALID_RBV - bi - TRUE if this is a real state - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):07:VELO - ao - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):07:VELO_RBV - ai - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):08:ACCL - ao - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):08:ACCL_RBV - ai - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):08:DCCL - ao - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):08:DCCL_RBV - ai - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):08:DELTA - ao - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):08:DELTA_RBV - ai - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):08:ENCODER_RBV - longin - Encoder count associated with this state - | expand: %.2d | io: input * - $(PREFIX):08:LOCKED_RBV - bi - TRUE if state is immutable - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):08:MOVE_OK_RBV - bi - TRUE if the move would be safe - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):08:NAME_RBV - waveform - Name of this position state - | expand: %.2d | io: input * - $(PREFIX):08:SETPOINT - ao - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):08:SETPOINT_RBV - ai - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):08:VALID_RBV - bi - TRUE if this is a real state - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):08:VELO - ao - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):08:VELO_RBV - ai - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):09:ACCL - ao - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):09:ACCL_RBV - ai - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):09:DCCL - ao - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):09:DCCL_RBV - ai - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):09:DELTA - ao - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):09:DELTA_RBV - ai - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):09:ENCODER_RBV - longin - Encoder count associated with this state - | expand: %.2d | io: input * - $(PREFIX):09:LOCKED_RBV - bi - TRUE if state is immutable - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):09:MOVE_OK_RBV - bi - TRUE if the move would be safe - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):09:NAME_RBV - waveform - Name of this position state - | expand: %.2d | io: input * - $(PREFIX):09:SETPOINT - ao - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):09:SETPOINT_RBV - ai - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):09:VALID_RBV - bi - TRUE if this is a real state - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):09:VELO - ao - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):09:VELO_RBV - ai - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):10:ACCL - ao - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):10:ACCL_RBV - ai - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):10:DCCL - ao - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):10:DCCL_RBV - ai - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):10:DELTA - ao - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):10:DELTA_RBV - ai - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):10:ENCODER_RBV - longin - Encoder count associated with this state - | expand: %.2d | io: input * - $(PREFIX):10:LOCKED_RBV - bi - TRUE if state is immutable - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):10:MOVE_OK_RBV - bi - TRUE if the move would be safe - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):10:NAME_RBV - waveform - Name of this position state - | expand: %.2d | io: input * - $(PREFIX):10:SETPOINT - ao - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):10:SETPOINT_RBV - ai - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):10:VALID_RBV - bi - TRUE if this is a real state - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):10:VELO - ao - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):10:VELO_RBV - ai - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):11:ACCL - ao - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):11:ACCL_RBV - ai - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):11:DCCL - ao - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):11:DCCL_RBV - ai - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):11:DELTA - ao - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):11:DELTA_RBV - ai - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):11:ENCODER_RBV - longin - Encoder count associated with this state - | expand: %.2d | io: input * - $(PREFIX):11:LOCKED_RBV - bi - TRUE if state is immutable - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):11:MOVE_OK_RBV - bi - TRUE if the move would be safe - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):11:NAME_RBV - waveform - Name of this position state - | expand: %.2d | io: input * - $(PREFIX):11:SETPOINT - ao - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):11:SETPOINT_RBV - ai - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):11:VALID_RBV - bi - TRUE if this is a real state - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):11:VELO - ao - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):11:VELO_RBV - ai - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):12:ACCL - ao - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):12:ACCL_RBV - ai - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):12:DCCL - ao - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):12:DCCL_RBV - ai - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):12:DELTA - ao - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):12:DELTA_RBV - ai - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):12:ENCODER_RBV - longin - Encoder count associated with this state - | expand: %.2d | io: input * - $(PREFIX):12:LOCKED_RBV - bi - TRUE if state is immutable - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):12:MOVE_OK_RBV - bi - TRUE if the move would be safe - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):12:NAME_RBV - waveform - Name of this position state - | expand: %.2d | io: input * - $(PREFIX):12:SETPOINT - ao - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):12:SETPOINT_RBV - ai - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):12:VALID_RBV - bi - TRUE if this is a real state - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):12:VELO - ao - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):12:VELO_RBV - ai - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):13:ACCL - ao - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):13:ACCL_RBV - ai - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):13:DCCL - ao - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):13:DCCL_RBV - ai - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):13:DELTA - ao - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):13:DELTA_RBV - ai - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):13:ENCODER_RBV - longin - Encoder count associated with this state - | expand: %.2d | io: input * - $(PREFIX):13:LOCKED_RBV - bi - TRUE if state is immutable - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):13:MOVE_OK_RBV - bi - TRUE if the move would be safe - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):13:NAME_RBV - waveform - Name of this position state - | expand: %.2d | io: input * - $(PREFIX):13:SETPOINT - ao - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):13:SETPOINT_RBV - ai - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):13:VALID_RBV - bi - TRUE if this is a real state - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):13:VELO - ao - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):13:VELO_RBV - ai - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):14:ACCL - ao - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):14:ACCL_RBV - ai - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):14:DCCL - ao - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):14:DCCL_RBV - ai - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):14:DELTA - ao - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):14:DELTA_RBV - ai - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):14:ENCODER_RBV - longin - Encoder count associated with this state - | expand: %.2d | io: input * - $(PREFIX):14:LOCKED_RBV - bi - TRUE if state is immutable - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):14:MOVE_OK_RBV - bi - TRUE if the move would be safe - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):14:NAME_RBV - waveform - Name of this position state - | expand: %.2d | io: input * - $(PREFIX):14:SETPOINT - ao - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):14:SETPOINT_RBV - ai - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):14:VALID_RBV - bi - TRUE if this is a real state - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):14:VELO - ao - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):14:VELO_RBV - ai - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):15:ACCL - ao - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):15:ACCL_RBV - ai - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):15:DCCL - ao - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):15:DCCL_RBV - ai - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):15:DELTA - ao - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):15:DELTA_RBV - ai - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):15:ENCODER_RBV - longin - Encoder count associated with this state - | expand: %.2d | io: input * - $(PREFIX):15:LOCKED_RBV - bi - TRUE if state is immutable - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):15:MOVE_OK_RBV - bi - TRUE if the move would be safe - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):15:NAME_RBV - waveform - Name of this position state - | expand: %.2d | io: input * - $(PREFIX):15:SETPOINT - ao - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):15:SETPOINT_RBV - ai - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):15:VALID_RBV - bi - TRUE if this is a real state - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):15:VELO - ao - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):15:VELO_RBV - ai - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):BUSY_RBV - bi - $(SYMBOL).bBusy - | field: ONAM True | field: ZNAM False | io: input * - $(PREFIX):DONE_RBV - bi - $(SYMBOL).bDone - | field: ONAM True | field: ZNAM False | io: input * - $(PREFIX):ERR_RBV - bi - $(SYMBOL).bError - | field: ONAM True | field: ZNAM False | io: input * - $(PREFIX):ERRID_RBV - longin - $(SYMBOL).nErrorId - | io: input * - $(PREFIX):ERRMSG_RBV - waveform - $(SYMBOL).sErrorMessage - | io: input * - $(PREFIX):GET_RBV - mbbi - $(SYMBOL).enumGet - | io: input * - $(PREFIX):RESET - bo - $(SYMBOL).bReset - | field: ONAM True | field: ZNAM False | io: output * - $(PREFIX):RESET_RBV - bi - $(SYMBOL).bReset - | field: ONAM True | field: ZNAM False | io: output * - $(PREFIX):SET - mbbo - $(SYMBOL).enumSet - | io: output * - $(PREFIX):SET_RBV - mbbi - $(SYMBOL).enumSet - | io: output LCLS_General.FB_Listener ^^^^^^^^^^^^^^^^^^^^^^^^ .. list-table:: :header-rows: 1 :align: center * - Record - Type - Description - Pragma * - $(PREFIX):AlarmsCleared_RBV - longin - $(SYMBOL).nCntAlarmsCleared - | io: input * - $(PREFIX):AlarmsConfirmed_RBV - longin - $(SYMBOL).nCntAlarmsConfirmed - | io: input * - $(PREFIX):AlarmsRaised_RBV - longin - $(SYMBOL).nCntAlarmsRaised - | io: input * - $(PREFIX):Log:EventClass_RBV - waveform - TwinCAT Event class - | io: input * - $(PREFIX):Log:EventType_RBV - mbbi - The event type - | io: input * - $(PREFIX):Log:Hostname_RBV - waveform - PLC Hostname - | io: input * - $(PREFIX):Log:Message_RBV - waveform - $(SYMBOL).stEventInfo.msg - | io: input * - $(PREFIX):Log:MessageID_RBV - longin - TwinCAT Message ID - | io: input * - $(PREFIX):Log:MessageJSON_RBV - waveform - Metadata with the message - | io: input * - $(PREFIX):Log:Schema_RBV - waveform - Schema string - | io: input * - $(PREFIX):Log:Severity_RBV - mbbi - TcEventSeverity - | field: ONST Info | field: THST Error | field: TWST Warning | field: ZRST Verbose | io: input * - $(PREFIX):Log:Source_RBV - waveform - $(SYMBOL).stEventInfo.source - | io: input * - $(PREFIX):Log:Timestamp_RBV - ai - Unix timestamp - | io: input * - $(PREFIX):LogToVisualStudio - bo - $(SYMBOL).bLogToVisualStudio - | io: output * - $(PREFIX):LogToVisualStudio_RBV - bi - $(SYMBOL).bLogToVisualStudio - | io: output * - $(PREFIX):MessagesSent_RBV - longin - $(SYMBOL).nCntMessagesSent - | io: input * - $(PREFIX):MinSeverity - mbbo - $(SYMBOL).eMinSeverity - | io: output * - $(PREFIX):MinSeverity_RBV - mbbi - $(SYMBOL).eMinSeverity - | io: output LCLS_General.FB_LogHandler ^^^^^^^^^^^^^^^^^^^^^^^^^^ .. list-table:: :header-rows: 1 :align: center * - Record - Type - Description - Pragma * - $(PREFIX):ADS:AlarmsCleared_RBV - longin - $(SYMBOL).fbTcAdsListener.nCntAlarmsCleared - | io: input * - $(PREFIX):ADS:AlarmsConfirmed_RBV - longin - $(SYMBOL).fbTcAdsListener.nCntAlarmsConfirmed - | io: input * - $(PREFIX):ADS:AlarmsRaised_RBV - longin - $(SYMBOL).fbTcAdsListener.nCntAlarmsRaised - | io: input * - $(PREFIX):ADS:Log:EventClass_RBV - waveform - TwinCAT Event class - | io: input * - $(PREFIX):ADS:Log:EventType_RBV - mbbi - The event type - | io: input * - $(PREFIX):ADS:Log:Hostname_RBV - waveform - PLC Hostname - | io: input * - $(PREFIX):ADS:Log:Message_RBV - waveform - $(SYMBOL).fbTcAdsListener.stEventInfo.msg - | io: input * - $(PREFIX):ADS:Log:MessageID_RBV - longin - TwinCAT Message ID - | io: input * - $(PREFIX):ADS:Log:MessageJSON_RBV - waveform - Metadata with the message - | io: input * - $(PREFIX):ADS:Log:Schema_RBV - waveform - Schema string - | io: input * - $(PREFIX):ADS:Log:Severity_RBV - mbbi - TcEventSeverity - | field: ONST Info | field: THST Error | field: TWST Warning | field: ZRST Verbose | io: input * - $(PREFIX):ADS:Log:Source_RBV - waveform - $(SYMBOL).fbTcAdsListener.stEventInfo.source - | io: input * - $(PREFIX):ADS:Log:Timestamp_RBV - ai - Unix timestamp - | io: input * - $(PREFIX):ADS:LogToVisualStudio - bo - $(SYMBOL).fbTcAdsListener.bLogToVisualStudio - | io: output * - $(PREFIX):ADS:LogToVisualStudio_RBV - bi - $(SYMBOL).fbTcAdsListener.bLogToVisualStudio - | io: output * - $(PREFIX):ADS:MessagesSent_RBV - longin - $(SYMBOL).fbTcAdsListener.nCntMessagesSent - | io: input * - $(PREFIX):ADS:MinSeverity - mbbo - $(SYMBOL).fbTcAdsListener.eMinSeverity - | io: output * - $(PREFIX):ADS:MinSeverity_RBV - mbbi - $(SYMBOL).fbTcAdsListener.eMinSeverity - | io: output * - $(PREFIX):LCLS:AlarmsCleared_RBV - longin - $(SYMBOL).fbLCLSListener.nCntAlarmsCleared - | io: input * - $(PREFIX):LCLS:AlarmsConfirmed_RBV - longin - $(SYMBOL).fbLCLSListener.nCntAlarmsConfirmed - | io: input * - $(PREFIX):LCLS:AlarmsRaised_RBV - longin - $(SYMBOL).fbLCLSListener.nCntAlarmsRaised - | io: input * - $(PREFIX):LCLS:Log:EventClass_RBV - waveform - TwinCAT Event class - | io: input * - $(PREFIX):LCLS:Log:EventType_RBV - mbbi - The event type - | io: input * - $(PREFIX):LCLS:Log:Hostname_RBV - waveform - PLC Hostname - | io: input * - $(PREFIX):LCLS:Log:Message_RBV - waveform - $(SYMBOL).fbLCLSListener.stEventInfo.msg - | io: input * - $(PREFIX):LCLS:Log:MessageID_RBV - longin - TwinCAT Message ID - | io: input * - $(PREFIX):LCLS:Log:MessageJSON_RBV - waveform - Metadata with the message - | io: input * - $(PREFIX):LCLS:Log:Schema_RBV - waveform - Schema string - | io: input * - $(PREFIX):LCLS:Log:Severity_RBV - mbbi - TcEventSeverity - | field: ONST Info | field: THST Error | field: TWST Warning | field: ZRST Verbose | io: input * - $(PREFIX):LCLS:Log:Source_RBV - waveform - $(SYMBOL).fbLCLSListener.stEventInfo.source - | io: input * - $(PREFIX):LCLS:Log:Timestamp_RBV - ai - Unix timestamp - | io: input * - $(PREFIX):LCLS:LogToVisualStudio - bo - $(SYMBOL).fbLCLSListener.bLogToVisualStudio - | io: output * - $(PREFIX):LCLS:LogToVisualStudio_RBV - bi - $(SYMBOL).fbLCLSListener.bLogToVisualStudio - | io: output * - $(PREFIX):LCLS:MessagesSent_RBV - longin - $(SYMBOL).fbLCLSListener.nCntMessagesSent - | io: input * - $(PREFIX):LCLS:MinSeverity - mbbo - $(SYMBOL).fbLCLSListener.eMinSeverity - | io: output * - $(PREFIX):LCLS:MinSeverity_RBV - mbbi - $(SYMBOL).fbLCLSListener.eMinSeverity - | io: output * - $(PREFIX):Router:AlarmsCleared_RBV - longin - $(SYMBOL).fbTcRouterListener.nCntAlarmsCleared - | io: input * - $(PREFIX):Router:AlarmsConfirmed_RBV - longin - $(SYMBOL).fbTcRouterListener.nCntAlarmsConfirmed - | io: input * - $(PREFIX):Router:AlarmsRaised_RBV - longin - $(SYMBOL).fbTcRouterListener.nCntAlarmsRaised - | io: input * - $(PREFIX):Router:Log:EventClass_RBV - waveform - TwinCAT Event class - | io: input * - $(PREFIX):Router:Log:EventType_RBV - mbbi - The event type - | io: input * - $(PREFIX):Router:Log:Hostname_RBV - waveform - PLC Hostname - | io: input * - $(PREFIX):Router:Log:Message_RBV - waveform - $(SYMBOL).fbTcRouterListener.stEventInfo.msg - | io: input * - $(PREFIX):Router:Log:MessageID_RBV - longin - TwinCAT Message ID - | io: input * - $(PREFIX):Router:Log:MessageJSON_RBV - waveform - Metadata with the message - | io: input * - $(PREFIX):Router:Log:Schema_RBV - waveform - Schema string - | io: input * - $(PREFIX):Router:Log:Severity_RBV - mbbi - TcEventSeverity - | field: ONST Info | field: THST Error | field: TWST Warning | field: ZRST Verbose | io: input * - $(PREFIX):Router:Log:Source_RBV - waveform - $(SYMBOL).fbTcRouterListener.stEventInfo.source - | io: input * - $(PREFIX):Router:Log:Timestamp_RBV - ai - Unix timestamp - | io: input * - $(PREFIX):Router:LogToVisualStudio - bo - $(SYMBOL).fbTcRouterListener.bLogToVisualStudio - | io: output * - $(PREFIX):Router:LogToVisualStudio_RBV - bi - $(SYMBOL).fbTcRouterListener.bLogToVisualStudio - | io: output * - $(PREFIX):Router:MessagesSent_RBV - longin - $(SYMBOL).fbTcRouterListener.nCntMessagesSent - | io: input * - $(PREFIX):Router:MinSeverity - mbbo - $(SYMBOL).fbTcRouterListener.eMinSeverity - | io: output * - $(PREFIX):Router:MinSeverity_RBV - mbbi - $(SYMBOL).fbTcRouterListener.eMinSeverity - | io: output * - $(PREFIX):RTime:AlarmsCleared_RBV - longin - $(SYMBOL).fbTcRTimeListener.nCntAlarmsCleared - | io: input * - $(PREFIX):RTime:AlarmsConfirmed_RBV - longin - $(SYMBOL).fbTcRTimeListener.nCntAlarmsConfirmed - | io: input * - $(PREFIX):RTime:AlarmsRaised_RBV - longin - $(SYMBOL).fbTcRTimeListener.nCntAlarmsRaised - | io: input * - $(PREFIX):RTime:Log:EventClass_RBV - waveform - TwinCAT Event class - | io: input * - $(PREFIX):RTime:Log:EventType_RBV - mbbi - The event type - | io: input * - $(PREFIX):RTime:Log:Hostname_RBV - waveform - PLC Hostname - | io: input * - $(PREFIX):RTime:Log:Message_RBV - waveform - $(SYMBOL).fbTcRTimeListener.stEventInfo.msg - | io: input * - $(PREFIX):RTime:Log:MessageID_RBV - longin - TwinCAT Message ID - | io: input * - $(PREFIX):RTime:Log:MessageJSON_RBV - waveform - Metadata with the message - | io: input * - $(PREFIX):RTime:Log:Schema_RBV - waveform - Schema string - | io: input * - $(PREFIX):RTime:Log:Severity_RBV - mbbi - TcEventSeverity - | field: ONST Info | field: THST Error | field: TWST Warning | field: ZRST Verbose | io: input * - $(PREFIX):RTime:Log:Source_RBV - waveform - $(SYMBOL).fbTcRTimeListener.stEventInfo.source - | io: input * - $(PREFIX):RTime:Log:Timestamp_RBV - ai - Unix timestamp - | io: input * - $(PREFIX):RTime:LogToVisualStudio - bo - $(SYMBOL).fbTcRTimeListener.bLogToVisualStudio - | io: output * - $(PREFIX):RTime:LogToVisualStudio_RBV - bi - $(SYMBOL).fbTcRTimeListener.bLogToVisualStudio - | io: output * - $(PREFIX):RTime:MessagesSent_RBV - longin - $(SYMBOL).fbTcRTimeListener.nCntMessagesSent - | io: input * - $(PREFIX):RTime:MinSeverity - mbbo - $(SYMBOL).fbTcRTimeListener.eMinSeverity - | io: output * - $(PREFIX):RTime:MinSeverity_RBV - mbbi - $(SYMBOL).fbTcRTimeListener.eMinSeverity - | io: output * - $(PREFIX):System:AlarmsCleared_RBV - longin - $(SYMBOL).fbTcSystemListener.nCntAlarmsCleared - | io: input * - $(PREFIX):System:AlarmsConfirmed_RBV - longin - $(SYMBOL).fbTcSystemListener.nCntAlarmsConfirmed - | io: input * - $(PREFIX):System:AlarmsRaised_RBV - longin - $(SYMBOL).fbTcSystemListener.nCntAlarmsRaised - | io: input * - $(PREFIX):System:Log:EventClass_RBV - waveform - TwinCAT Event class - | io: input * - $(PREFIX):System:Log:EventType_RBV - mbbi - The event type - | io: input * - $(PREFIX):System:Log:Hostname_RBV - waveform - PLC Hostname - | io: input * - $(PREFIX):System:Log:Message_RBV - waveform - $(SYMBOL).fbTcSystemListener.stEventInfo.msg - | io: input * - $(PREFIX):System:Log:MessageID_RBV - longin - TwinCAT Message ID - | io: input * - $(PREFIX):System:Log:MessageJSON_RBV - waveform - Metadata with the message - | io: input * - $(PREFIX):System:Log:Schema_RBV - waveform - Schema string - | io: input * - $(PREFIX):System:Log:Severity_RBV - mbbi - TcEventSeverity - | field: ONST Info | field: THST Error | field: TWST Warning | field: ZRST Verbose | io: input * - $(PREFIX):System:Log:Source_RBV - waveform - $(SYMBOL).fbTcSystemListener.stEventInfo.source - | io: input * - $(PREFIX):System:Log:Timestamp_RBV - ai - Unix timestamp - | io: input * - $(PREFIX):System:LogToVisualStudio - bo - $(SYMBOL).fbTcSystemListener.bLogToVisualStudio - | io: output * - $(PREFIX):System:LogToVisualStudio_RBV - bi - $(SYMBOL).fbTcSystemListener.bLogToVisualStudio - | io: output * - $(PREFIX):System:MessagesSent_RBV - longin - $(SYMBOL).fbTcSystemListener.nCntMessagesSent - | io: input * - $(PREFIX):System:MinSeverity - mbbo - $(SYMBOL).fbTcSystemListener.eMinSeverity - | io: output * - $(PREFIX):System:MinSeverity_RBV - mbbi - $(SYMBOL).fbTcSystemListener.eMinSeverity - | io: output * - $(PREFIX):Windows:AlarmsCleared_RBV - longin - $(SYMBOL).fbWindowsListener.nCntAlarmsCleared - | io: input * - $(PREFIX):Windows:AlarmsConfirmed_RBV - longin - $(SYMBOL).fbWindowsListener.nCntAlarmsConfirmed - | io: input * - $(PREFIX):Windows:AlarmsRaised_RBV - longin - $(SYMBOL).fbWindowsListener.nCntAlarmsRaised - | io: input * - $(PREFIX):Windows:Log:EventClass_RBV - waveform - TwinCAT Event class - | io: input * - $(PREFIX):Windows:Log:EventType_RBV - mbbi - The event type - | io: input * - $(PREFIX):Windows:Log:Hostname_RBV - waveform - PLC Hostname - | io: input * - $(PREFIX):Windows:Log:Message_RBV - waveform - $(SYMBOL).fbWindowsListener.stEventInfo.msg - | io: input * - $(PREFIX):Windows:Log:MessageID_RBV - longin - TwinCAT Message ID - | io: input * - $(PREFIX):Windows:Log:MessageJSON_RBV - waveform - Metadata with the message - | io: input * - $(PREFIX):Windows:Log:Schema_RBV - waveform - Schema string - | io: input * - $(PREFIX):Windows:Log:Severity_RBV - mbbi - TcEventSeverity - | field: ONST Info | field: THST Error | field: TWST Warning | field: ZRST Verbose | io: input * - $(PREFIX):Windows:Log:Source_RBV - waveform - $(SYMBOL).fbWindowsListener.stEventInfo.source - | io: input * - $(PREFIX):Windows:Log:Timestamp_RBV - ai - Unix timestamp - | io: input * - $(PREFIX):Windows:LogToVisualStudio - bo - $(SYMBOL).fbWindowsListener.bLogToVisualStudio - | io: output * - $(PREFIX):Windows:LogToVisualStudio_RBV - bi - $(SYMBOL).fbWindowsListener.bLogToVisualStudio - | io: output * - $(PREFIX):Windows:MessagesSent_RBV - longin - $(SYMBOL).fbWindowsListener.nCntMessagesSent - | io: input * - $(PREFIX):Windows:MinSeverity - mbbo - $(SYMBOL).fbWindowsListener.eMinSeverity - | io: output * - $(PREFIX):Windows:MinSeverity_RBV - mbbi - $(SYMBOL).fbWindowsListener.eMinSeverity - | io: output LCLS_General.FB_LogMessage ^^^^^^^^^^^^^^^^^^^^^^^^^^ .. list-table:: :header-rows: 1 :align: center * - Record - Type - Description - Pragma * - $(PREFIX):Reset - bo - Rising-edge reset of trip - | io: output * - $(PREFIX):Reset_RBV - bi - Rising-edge reset of trip - | io: output * - $(PREFIX):Tripped_RBV - bi - Log message FB tripped - | io: input LCLS_General.FB_TempSensor ^^^^^^^^^^^^^^^^^^^^^^^^^^ .. list-table:: :header-rows: 1 :align: center * - Record - Type - Description - Pragma * - $(PREFIX):CONN_RBV - bi - $(SYMBOL).bConnected - | field: ONAM Connected | field: ZNAM Disconnected | io: input * - $(PREFIX):ERR_RBV - bi - $(SYMBOL).bError - | field: ONAM True | field: ZNAM False | io: input * - $(PREFIX):TEMP_RBV - ai - $(SYMBOL).fTemp - | field: EGU C | field: PREC 2 | io: input LCLS_General.ST_PendingEvent ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ .. list-table:: :header-rows: 1 :align: center * - Record - Type - Description - Pragma * - $(PREFIX):EventClass_RBV - waveform - TwinCAT Event class - | io: input * - $(PREFIX):EventType_RBV - mbbi - The event type - | io: input * - $(PREFIX):Hostname_RBV - waveform - PLC Hostname - | io: input * - $(PREFIX):Message_RBV - waveform - $(SYMBOL).stEventInfo.msg - | io: input * - $(PREFIX):MessageID_RBV - longin - TwinCAT Message ID - | io: input * - $(PREFIX):MessageJSON_RBV - waveform - Metadata with the message - | io: input * - $(PREFIX):Schema_RBV - waveform - Schema string - | io: input * - $(PREFIX):Severity_RBV - mbbi - TcEventSeverity - | field: ONST Info | field: THST Error | field: TWST Warning | field: ZRST Verbose | io: input * - $(PREFIX):Source_RBV - waveform - $(SYMBOL).stEventInfo.source - | io: input * - $(PREFIX):Timestamp_RBV - ai - Unix timestamp - | io: input lcls_twincat_motion.DUT_MotionStage ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ .. list-table:: :header-rows: 1 :align: center * - Record - Type - Description - Pragma * - $(PREFIX):PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - $(PREFIX):PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - $(PREFIX):PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - $(PREFIX):PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - $(PREFIX):PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - $(PREFIX):PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):PLC:bHomeCmd - bo - Start the homing routine - | io: output * - $(PREFIX):PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - $(PREFIX):PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - $(PREFIX):PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):PLC:bMoveCmd - bo - Start a move - | io: output * - $(PREFIX):PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - $(PREFIX):PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - $(PREFIX):PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - $(PREFIX):PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - $(PREFIX):PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - $(PREFIX):PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - $(PREFIX):PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - $(PREFIX):PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - $(PREFIX):PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - $(PREFIX):PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - $(PREFIX):PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - $(PREFIX):PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - $(PREFIX):PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - $(PREFIX):PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - $(PREFIX):PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - $(PREFIX):PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - $(PREFIX):PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - $(PREFIX):PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - $(PREFIX):PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - $(PREFIX):PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - $(PREFIX):PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - $(PREFIX):PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - $(PREFIX):PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - $(PREFIX):PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - $(PREFIX):PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - $(PREFIX):PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - $(PREFIX):PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - $(PREFIX):PLC:sName_RBV - waveform - PLC program name - | io: input lcls_twincat_motion.DUT_PositionState ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ .. list-table:: :header-rows: 1 :align: center * - Record - Type - Description - Pragma * - $(PREFIX):ACCL - ao - Acceleration to use for moves to this state - | io: output * - $(PREFIX):ACCL_RBV - ai - Acceleration to use for moves to this state - | io: output * - $(PREFIX):DCCL - ao - Deceleration to use for moves to this state - | io: output * - $(PREFIX):DCCL_RBV - ai - Deceleration to use for moves to this state - | io: output * - $(PREFIX):DELTA - ao - Max deviation from position at this state - | field: DRVL 0.0 | io: output * - $(PREFIX):DELTA_RBV - ai - Max deviation from position at this state - | field: DRVL 0.0 | io: output * - $(PREFIX):ENCODER_RBV - longin - Encoder count associated with this state - | io: input * - $(PREFIX):LOCKED_RBV - bi - TRUE if state is immutable - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):MOVE_OK_RBV - bi - TRUE if the move would be safe - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):NAME_RBV - waveform - Name of this position state - | io: input * - $(PREFIX):SETPOINT - ao - Axis position associated with this state - | io: output * - $(PREFIX):SETPOINT_RBV - ai - Axis position associated with this state - | io: output * - $(PREFIX):VALID_RBV - bi - TRUE if this is a real state - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):VELO - ao - Speed at which to move to this state - | io: output * - $(PREFIX):VELO_RBV - ai - Speed at which to move to this state - | io: output lcls_twincat_motion.FB_PositionStateBase ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ .. list-table:: :header-rows: 1 :align: center * - Record - Type - Description - Pragma * - $(PREFIX):01:ACCL - ao - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):01:ACCL_RBV - ai - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):01:DCCL - ao - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):01:DCCL_RBV - ai - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):01:DELTA - ao - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):01:DELTA_RBV - ai - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):01:ENCODER_RBV - longin - Encoder count associated with this state - | expand: %.2d | io: input * - $(PREFIX):01:LOCKED_RBV - bi - TRUE if state is immutable - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):01:MOVE_OK_RBV - bi - TRUE if the move would be safe - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):01:NAME_RBV - waveform - Name of this position state - | expand: %.2d | io: input * - $(PREFIX):01:SETPOINT - ao - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):01:SETPOINT_RBV - ai - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):01:VALID_RBV - bi - TRUE if this is a real state - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):01:VELO - ao - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):01:VELO_RBV - ai - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):02:ACCL - ao - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):02:ACCL_RBV - ai - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):02:DCCL - ao - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):02:DCCL_RBV - ai - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):02:DELTA - ao - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):02:DELTA_RBV - ai - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):02:ENCODER_RBV - longin - Encoder count associated with this state - | expand: %.2d | io: input * - $(PREFIX):02:LOCKED_RBV - bi - TRUE if state is immutable - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):02:MOVE_OK_RBV - bi - TRUE if the move would be safe - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):02:NAME_RBV - waveform - Name of this position state - | expand: %.2d | io: input * - $(PREFIX):02:SETPOINT - ao - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):02:SETPOINT_RBV - ai - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):02:VALID_RBV - bi - TRUE if this is a real state - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):02:VELO - ao - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):02:VELO_RBV - ai - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):03:ACCL - ao - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):03:ACCL_RBV - ai - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):03:DCCL - ao - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):03:DCCL_RBV - ai - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):03:DELTA - ao - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):03:DELTA_RBV - ai - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):03:ENCODER_RBV - longin - Encoder count associated with this state - | expand: %.2d | io: input * - $(PREFIX):03:LOCKED_RBV - bi - TRUE if state is immutable - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):03:MOVE_OK_RBV - bi - TRUE if the move would be safe - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):03:NAME_RBV - waveform - Name of this position state - | expand: %.2d | io: input * - $(PREFIX):03:SETPOINT - ao - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):03:SETPOINT_RBV - ai - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):03:VALID_RBV - bi - TRUE if this is a real state - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):03:VELO - ao - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):03:VELO_RBV - ai - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):04:ACCL - ao - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):04:ACCL_RBV - ai - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):04:DCCL - ao - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):04:DCCL_RBV - ai - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):04:DELTA - ao - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):04:DELTA_RBV - ai - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):04:ENCODER_RBV - longin - Encoder count associated with this state - | expand: %.2d | io: input * - $(PREFIX):04:LOCKED_RBV - bi - TRUE if state is immutable - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):04:MOVE_OK_RBV - bi - TRUE if the move would be safe - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):04:NAME_RBV - waveform - Name of this position state - | expand: %.2d | io: input * - $(PREFIX):04:SETPOINT - ao - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):04:SETPOINT_RBV - ai - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):04:VALID_RBV - bi - TRUE if this is a real state - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):04:VELO - ao - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):04:VELO_RBV - ai - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):05:ACCL - ao - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):05:ACCL_RBV - ai - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):05:DCCL - ao - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):05:DCCL_RBV - ai - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):05:DELTA - ao - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):05:DELTA_RBV - ai - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):05:ENCODER_RBV - longin - Encoder count associated with this state - | expand: %.2d | io: input * - $(PREFIX):05:LOCKED_RBV - bi - TRUE if state is immutable - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):05:MOVE_OK_RBV - bi - TRUE if the move would be safe - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):05:NAME_RBV - waveform - Name of this position state - | expand: %.2d | io: input * - $(PREFIX):05:SETPOINT - ao - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):05:SETPOINT_RBV - ai - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):05:VALID_RBV - bi - TRUE if this is a real state - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):05:VELO - ao - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):05:VELO_RBV - ai - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):06:ACCL - ao - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):06:ACCL_RBV - ai - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):06:DCCL - ao - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):06:DCCL_RBV - ai - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):06:DELTA - ao - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):06:DELTA_RBV - ai - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):06:ENCODER_RBV - longin - Encoder count associated with this state - | expand: %.2d | io: input * - $(PREFIX):06:LOCKED_RBV - bi - TRUE if state is immutable - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):06:MOVE_OK_RBV - bi - TRUE if the move would be safe - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):06:NAME_RBV - waveform - Name of this position state - | expand: %.2d | io: input * - $(PREFIX):06:SETPOINT - ao - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):06:SETPOINT_RBV - ai - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):06:VALID_RBV - bi - TRUE if this is a real state - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):06:VELO - ao - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):06:VELO_RBV - ai - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):07:ACCL - ao - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):07:ACCL_RBV - ai - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):07:DCCL - ao - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):07:DCCL_RBV - ai - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):07:DELTA - ao - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):07:DELTA_RBV - ai - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):07:ENCODER_RBV - longin - Encoder count associated with this state - | expand: %.2d | io: input * - $(PREFIX):07:LOCKED_RBV - bi - TRUE if state is immutable - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):07:MOVE_OK_RBV - bi - TRUE if the move would be safe - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):07:NAME_RBV - waveform - Name of this position state - | expand: %.2d | io: input * - $(PREFIX):07:SETPOINT - ao - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):07:SETPOINT_RBV - ai - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):07:VALID_RBV - bi - TRUE if this is a real state - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):07:VELO - ao - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):07:VELO_RBV - ai - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):08:ACCL - ao - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):08:ACCL_RBV - ai - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):08:DCCL - ao - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):08:DCCL_RBV - ai - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):08:DELTA - ao - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):08:DELTA_RBV - ai - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):08:ENCODER_RBV - longin - Encoder count associated with this state - | expand: %.2d | io: input * - $(PREFIX):08:LOCKED_RBV - bi - TRUE if state is immutable - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):08:MOVE_OK_RBV - bi - TRUE if the move would be safe - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):08:NAME_RBV - waveform - Name of this position state - | expand: %.2d | io: input * - $(PREFIX):08:SETPOINT - ao - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):08:SETPOINT_RBV - ai - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):08:VALID_RBV - bi - TRUE if this is a real state - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):08:VELO - ao - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):08:VELO_RBV - ai - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):09:ACCL - ao - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):09:ACCL_RBV - ai - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):09:DCCL - ao - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):09:DCCL_RBV - ai - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):09:DELTA - ao - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):09:DELTA_RBV - ai - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):09:ENCODER_RBV - longin - Encoder count associated with this state - | expand: %.2d | io: input * - $(PREFIX):09:LOCKED_RBV - bi - TRUE if state is immutable - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):09:MOVE_OK_RBV - bi - TRUE if the move would be safe - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):09:NAME_RBV - waveform - Name of this position state - | expand: %.2d | io: input * - $(PREFIX):09:SETPOINT - ao - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):09:SETPOINT_RBV - ai - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):09:VALID_RBV - bi - TRUE if this is a real state - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):09:VELO - ao - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):09:VELO_RBV - ai - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):10:ACCL - ao - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):10:ACCL_RBV - ai - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):10:DCCL - ao - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):10:DCCL_RBV - ai - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):10:DELTA - ao - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):10:DELTA_RBV - ai - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):10:ENCODER_RBV - longin - Encoder count associated with this state - | expand: %.2d | io: input * - $(PREFIX):10:LOCKED_RBV - bi - TRUE if state is immutable - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):10:MOVE_OK_RBV - bi - TRUE if the move would be safe - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):10:NAME_RBV - waveform - Name of this position state - | expand: %.2d | io: input * - $(PREFIX):10:SETPOINT - ao - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):10:SETPOINT_RBV - ai - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):10:VALID_RBV - bi - TRUE if this is a real state - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):10:VELO - ao - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):10:VELO_RBV - ai - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):11:ACCL - ao - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):11:ACCL_RBV - ai - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):11:DCCL - ao - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):11:DCCL_RBV - ai - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):11:DELTA - ao - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):11:DELTA_RBV - ai - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):11:ENCODER_RBV - longin - Encoder count associated with this state - | expand: %.2d | io: input * - $(PREFIX):11:LOCKED_RBV - bi - TRUE if state is immutable - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):11:MOVE_OK_RBV - bi - TRUE if the move would be safe - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):11:NAME_RBV - waveform - Name of this position state - | expand: %.2d | io: input * - $(PREFIX):11:SETPOINT - ao - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):11:SETPOINT_RBV - ai - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):11:VALID_RBV - bi - TRUE if this is a real state - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):11:VELO - ao - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):11:VELO_RBV - ai - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):12:ACCL - ao - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):12:ACCL_RBV - ai - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):12:DCCL - ao - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):12:DCCL_RBV - ai - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):12:DELTA - ao - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):12:DELTA_RBV - ai - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):12:ENCODER_RBV - longin - Encoder count associated with this state - | expand: %.2d | io: input * - $(PREFIX):12:LOCKED_RBV - bi - TRUE if state is immutable - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):12:MOVE_OK_RBV - bi - TRUE if the move would be safe - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):12:NAME_RBV - waveform - Name of this position state - | expand: %.2d | io: input * - $(PREFIX):12:SETPOINT - ao - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):12:SETPOINT_RBV - ai - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):12:VALID_RBV - bi - TRUE if this is a real state - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):12:VELO - ao - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):12:VELO_RBV - ai - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):13:ACCL - ao - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):13:ACCL_RBV - ai - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):13:DCCL - ao - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):13:DCCL_RBV - ai - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):13:DELTA - ao - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):13:DELTA_RBV - ai - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):13:ENCODER_RBV - longin - Encoder count associated with this state - | expand: %.2d | io: input * - $(PREFIX):13:LOCKED_RBV - bi - TRUE if state is immutable - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):13:MOVE_OK_RBV - bi - TRUE if the move would be safe - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):13:NAME_RBV - waveform - Name of this position state - | expand: %.2d | io: input * - $(PREFIX):13:SETPOINT - ao - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):13:SETPOINT_RBV - ai - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):13:VALID_RBV - bi - TRUE if this is a real state - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):13:VELO - ao - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):13:VELO_RBV - ai - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):14:ACCL - ao - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):14:ACCL_RBV - ai - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):14:DCCL - ao - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):14:DCCL_RBV - ai - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):14:DELTA - ao - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):14:DELTA_RBV - ai - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):14:ENCODER_RBV - longin - Encoder count associated with this state - | expand: %.2d | io: input * - $(PREFIX):14:LOCKED_RBV - bi - TRUE if state is immutable - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):14:MOVE_OK_RBV - bi - TRUE if the move would be safe - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):14:NAME_RBV - waveform - Name of this position state - | expand: %.2d | io: input * - $(PREFIX):14:SETPOINT - ao - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):14:SETPOINT_RBV - ai - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):14:VALID_RBV - bi - TRUE if this is a real state - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):14:VELO - ao - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):14:VELO_RBV - ai - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):15:ACCL - ao - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):15:ACCL_RBV - ai - Acceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):15:DCCL - ao - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):15:DCCL_RBV - ai - Deceleration to use for moves to this state - | expand: %.2d | io: output * - $(PREFIX):15:DELTA - ao - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):15:DELTA_RBV - ai - Max deviation from position at this state - | expand: %.2d | field: DRVL 0.0 | io: output * - $(PREFIX):15:ENCODER_RBV - longin - Encoder count associated with this state - | expand: %.2d | io: input * - $(PREFIX):15:LOCKED_RBV - bi - TRUE if state is immutable - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):15:MOVE_OK_RBV - bi - TRUE if the move would be safe - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):15:NAME_RBV - waveform - Name of this position state - | expand: %.2d | io: input * - $(PREFIX):15:SETPOINT - ao - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):15:SETPOINT_RBV - ai - Axis position associated with this state - | expand: %.2d | io: output * - $(PREFIX):15:VALID_RBV - bi - TRUE if this is a real state - | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):15:VELO - ao - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):15:VELO_RBV - ai - Speed at which to move to this state - | expand: %.2d | io: output * - $(PREFIX):BUSY_RBV - bi - $(SYMBOL).bBusy - | field: ONAM True | field: ZNAM False | io: input * - $(PREFIX):DONE_RBV - bi - $(SYMBOL).bDone - | field: ONAM True | field: ZNAM False | io: input * - $(PREFIX):ERR_RBV - bi - $(SYMBOL).bError - | field: ONAM True | field: ZNAM False | io: input * - $(PREFIX):ERRID_RBV - longin - $(SYMBOL).nErrorId - | io: input * - $(PREFIX):ERRMSG_RBV - waveform - $(SYMBOL).sErrorMessage - | io: input * - $(PREFIX):RESET - bo - $(SYMBOL).bReset - | field: ONAM True | field: ZNAM False | io: output * - $(PREFIX):RESET_RBV - bi - $(SYMBOL).bReset - | field: ONAM True | field: ZNAM False | io: output lcls_twincat_motion.FB_PositionStateMove ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ .. list-table:: :header-rows: 1 :align: center * - Record - Type - Description - Pragma * - $(PREFIX):ACCL - ao - Acceleration to use for moves to this state - | io: output * - $(PREFIX):ACCL_RBV - ai - Acceleration to use for moves to this state - | io: output * - $(PREFIX):AT_STATE_RBV - bi - $(SYMBOL).bAtState - | field: ONAM True | field: ZNAM False | io: input * - $(PREFIX):BUSY_RBV - bi - $(SYMBOL).bBusy - | field: ONAM True | field: ZNAM False | io: input * - $(PREFIX):DCCL - ao - Deceleration to use for moves to this state - | io: output * - $(PREFIX):DCCL_RBV - ai - Deceleration to use for moves to this state - | io: output * - $(PREFIX):DELTA - ao - Max deviation from position at this state - | field: DRVL 0.0 | io: output * - $(PREFIX):DELTA_RBV - ai - Max deviation from position at this state - | field: DRVL 0.0 | io: output * - $(PREFIX):DONE_RBV - bi - $(SYMBOL).bDone - | field: ONAM True | field: ZNAM False | io: input * - $(PREFIX):ENCODER_RBV - longin - Encoder count associated with this state - | io: input * - $(PREFIX):ERR_RBV - bi - $(SYMBOL).bError - | field: ONAM True | field: ZNAM False | io: input * - $(PREFIX):ERRID_RBV - longin - $(SYMBOL).nErrorID - | io: input * - $(PREFIX):ERRMSG_RBV - waveform - $(SYMBOL).sErrorMessage - | io: input * - $(PREFIX):GO - bo - $(SYMBOL).bExecute - | field: ONAM True | field: ZNAM False | io: output * - $(PREFIX):GO_RBV - bi - $(SYMBOL).bExecute - | field: ONAM True | field: ZNAM False | io: output * - $(PREFIX):LOCKED_RBV - bi - TRUE if state is immutable - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):MOVE_OK_RBV - bi - TRUE if the move would be safe - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):NAME_RBV - waveform - Name of this position state - | io: input * - $(PREFIX):RESET - bo - $(SYMBOL).bReset - | field: ONAM True | field: ZNAM False | io: output * - $(PREFIX):RESET_RBV - bi - $(SYMBOL).bReset - | field: ONAM True | field: ZNAM False | io: output * - $(PREFIX):SETPOINT - ao - Axis position associated with this state - | io: output * - $(PREFIX):SETPOINT_RBV - ai - Axis position associated with this state - | io: output * - $(PREFIX):VALID_RBV - bi - TRUE if this is a real state - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - $(PREFIX):VELO - ao - Speed at which to move to this state - | io: output * - $(PREFIX):VELO_RBV - ai - Speed at which to move to this state - | io: output PMPS.FB_Arbiter ^^^^^^^^^^^^^^^ .. list-table:: :header-rows: 1 :align: center * - Record - Type - Description - Pragma * - $(PREFIX):AP:Entry:001:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):AP:Entry:001:Device_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:001:ID_RBV - longin - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:001:Live_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:001:PhotonEnergyRanges_RBV - longin - Assertion Pool - | field: EGU eV | io: input * - $(PREFIX):AP:Entry:001:Rate_RBV - longin - Assertion Pool - | field: EGU Hz | io: input * - $(PREFIX):AP:Entry:001:Transmission_RBV - ai - Assertion Pool - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):AP:Entry:001:Valid_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:001:Veto_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:002:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):AP:Entry:002:Device_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:002:ID_RBV - longin - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:002:Live_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:002:PhotonEnergyRanges_RBV - longin - Assertion Pool - | field: EGU eV | io: input * - $(PREFIX):AP:Entry:002:Rate_RBV - longin - Assertion Pool - | field: EGU Hz | io: input * - $(PREFIX):AP:Entry:002:Transmission_RBV - ai - Assertion Pool - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):AP:Entry:002:Valid_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:002:Veto_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:003:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):AP:Entry:003:Device_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:003:ID_RBV - longin - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:003:Live_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:003:PhotonEnergyRanges_RBV - longin - Assertion Pool - | field: EGU eV | io: input * - $(PREFIX):AP:Entry:003:Rate_RBV - longin - Assertion Pool - | field: EGU Hz | io: input * - $(PREFIX):AP:Entry:003:Transmission_RBV - ai - Assertion Pool - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):AP:Entry:003:Valid_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:003:Veto_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:004:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):AP:Entry:004:Device_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:004:ID_RBV - longin - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:004:Live_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:004:PhotonEnergyRanges_RBV - longin - Assertion Pool - | field: EGU eV | io: input * - $(PREFIX):AP:Entry:004:Rate_RBV - longin - Assertion Pool - | field: EGU Hz | io: input * - $(PREFIX):AP:Entry:004:Transmission_RBV - ai - Assertion Pool - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):AP:Entry:004:Valid_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:004:Veto_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:005:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):AP:Entry:005:Device_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:005:ID_RBV - longin - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:005:Live_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:005:PhotonEnergyRanges_RBV - longin - Assertion Pool - | field: EGU eV | io: input * - $(PREFIX):AP:Entry:005:Rate_RBV - longin - Assertion Pool - | field: EGU Hz | io: input * - $(PREFIX):AP:Entry:005:Transmission_RBV - ai - Assertion Pool - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):AP:Entry:005:Valid_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:005:Veto_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:006:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):AP:Entry:006:Device_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:006:ID_RBV - longin - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:006:Live_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:006:PhotonEnergyRanges_RBV - longin - Assertion Pool - | field: EGU eV | io: input * - $(PREFIX):AP:Entry:006:Rate_RBV - longin - Assertion Pool - | field: EGU Hz | io: input * - $(PREFIX):AP:Entry:006:Transmission_RBV - ai - Assertion Pool - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):AP:Entry:006:Valid_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:006:Veto_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:007:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):AP:Entry:007:Device_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:007:ID_RBV - longin - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:007:Live_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:007:PhotonEnergyRanges_RBV - longin - Assertion Pool - | field: EGU eV | io: input * - $(PREFIX):AP:Entry:007:Rate_RBV - longin - Assertion Pool - | field: EGU Hz | io: input * - $(PREFIX):AP:Entry:007:Transmission_RBV - ai - Assertion Pool - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):AP:Entry:007:Valid_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:007:Veto_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:008:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):AP:Entry:008:Device_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:008:ID_RBV - longin - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:008:Live_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:008:PhotonEnergyRanges_RBV - longin - Assertion Pool - | field: EGU eV | io: input * - $(PREFIX):AP:Entry:008:Rate_RBV - longin - Assertion Pool - | field: EGU Hz | io: input * - $(PREFIX):AP:Entry:008:Transmission_RBV - ai - Assertion Pool - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):AP:Entry:008:Valid_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:008:Veto_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:009:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):AP:Entry:009:Device_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:009:ID_RBV - longin - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:009:Live_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:009:PhotonEnergyRanges_RBV - longin - Assertion Pool - | field: EGU eV | io: input * - $(PREFIX):AP:Entry:009:Rate_RBV - longin - Assertion Pool - | field: EGU Hz | io: input * - $(PREFIX):AP:Entry:009:Transmission_RBV - ai - Assertion Pool - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):AP:Entry:009:Valid_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:009:Veto_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:010:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):AP:Entry:010:Device_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:010:ID_RBV - longin - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:010:Live_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:010:PhotonEnergyRanges_RBV - longin - Assertion Pool - | field: EGU eV | io: input * - $(PREFIX):AP:Entry:010:Rate_RBV - longin - Assertion Pool - | field: EGU Hz | io: input * - $(PREFIX):AP:Entry:010:Transmission_RBV - ai - Assertion Pool - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):AP:Entry:010:Valid_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:010:Veto_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:011:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):AP:Entry:011:Device_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:011:ID_RBV - longin - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:011:Live_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:011:PhotonEnergyRanges_RBV - longin - Assertion Pool - | field: EGU eV | io: input * - $(PREFIX):AP:Entry:011:Rate_RBV - longin - Assertion Pool - | field: EGU Hz | io: input * - $(PREFIX):AP:Entry:011:Transmission_RBV - ai - Assertion Pool - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):AP:Entry:011:Valid_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:011:Veto_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:012:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):AP:Entry:012:Device_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:012:ID_RBV - longin - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:012:Live_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:012:PhotonEnergyRanges_RBV - longin - Assertion Pool - | field: EGU eV | io: input * - $(PREFIX):AP:Entry:012:Rate_RBV - longin - Assertion Pool - | field: EGU Hz | io: input * - $(PREFIX):AP:Entry:012:Transmission_RBV - ai - Assertion Pool - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):AP:Entry:012:Valid_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:012:Veto_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:013:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):AP:Entry:013:Device_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:013:ID_RBV - longin - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:013:Live_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:013:PhotonEnergyRanges_RBV - longin - Assertion Pool - | field: EGU eV | io: input * - $(PREFIX):AP:Entry:013:Rate_RBV - longin - Assertion Pool - | field: EGU Hz | io: input * - $(PREFIX):AP:Entry:013:Transmission_RBV - ai - Assertion Pool - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):AP:Entry:013:Valid_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:013:Veto_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:014:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):AP:Entry:014:Device_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:014:ID_RBV - longin - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:014:Live_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:014:PhotonEnergyRanges_RBV - longin - Assertion Pool - | field: EGU eV | io: input * - $(PREFIX):AP:Entry:014:Rate_RBV - longin - Assertion Pool - | field: EGU Hz | io: input * - $(PREFIX):AP:Entry:014:Transmission_RBV - ai - Assertion Pool - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):AP:Entry:014:Valid_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:014:Veto_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:015:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):AP:Entry:015:Device_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:015:ID_RBV - longin - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:015:Live_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:015:PhotonEnergyRanges_RBV - longin - Assertion Pool - | field: EGU eV | io: input * - $(PREFIX):AP:Entry:015:Rate_RBV - longin - Assertion Pool - | field: EGU Hz | io: input * - $(PREFIX):AP:Entry:015:Transmission_RBV - ai - Assertion Pool - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):AP:Entry:015:Valid_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:015:Veto_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:016:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):AP:Entry:016:Device_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:016:ID_RBV - longin - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:016:Live_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:016:PhotonEnergyRanges_RBV - longin - Assertion Pool - | field: EGU eV | io: input * - $(PREFIX):AP:Entry:016:Rate_RBV - longin - Assertion Pool - | field: EGU Hz | io: input * - $(PREFIX):AP:Entry:016:Transmission_RBV - ai - Assertion Pool - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):AP:Entry:016:Valid_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:016:Veto_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:017:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):AP:Entry:017:Device_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:017:ID_RBV - longin - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:017:Live_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:017:PhotonEnergyRanges_RBV - longin - Assertion Pool - | field: EGU eV | io: input * - $(PREFIX):AP:Entry:017:Rate_RBV - longin - Assertion Pool - | field: EGU Hz | io: input * - $(PREFIX):AP:Entry:017:Transmission_RBV - ai - Assertion Pool - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):AP:Entry:017:Valid_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:017:Veto_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:018:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):AP:Entry:018:Device_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:018:ID_RBV - longin - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:018:Live_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:018:PhotonEnergyRanges_RBV - longin - Assertion Pool - | field: EGU eV | io: input * - $(PREFIX):AP:Entry:018:Rate_RBV - longin - Assertion Pool - | field: EGU Hz | io: input * - $(PREFIX):AP:Entry:018:Transmission_RBV - ai - Assertion Pool - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):AP:Entry:018:Valid_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:018:Veto_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:019:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):AP:Entry:019:Device_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:019:ID_RBV - longin - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:019:Live_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:019:PhotonEnergyRanges_RBV - longin - Assertion Pool - | field: EGU eV | io: input * - $(PREFIX):AP:Entry:019:Rate_RBV - longin - Assertion Pool - | field: EGU Hz | io: input * - $(PREFIX):AP:Entry:019:Transmission_RBV - ai - Assertion Pool - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):AP:Entry:019:Valid_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:019:Veto_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:020:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):AP:Entry:020:Device_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:020:ID_RBV - longin - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:020:Live_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:020:PhotonEnergyRanges_RBV - longin - Assertion Pool - | field: EGU eV | io: input * - $(PREFIX):AP:Entry:020:Rate_RBV - longin - Assertion Pool - | field: EGU Hz | io: input * - $(PREFIX):AP:Entry:020:Transmission_RBV - ai - Assertion Pool - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):AP:Entry:020:Valid_RBV - bi - Assertion Pool - | io: input * - $(PREFIX):AP:Entry:020:Veto_RBV - waveform - Assertion Pool - | io: input * - $(PREFIX):ArbiterID_RBV - longin - Arbiter ID for elev. req. - | io: input * - $(PREFIX):ArbitratedBP:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):ArbitratedBP:PhotonEnergyRanges_RBV - longin - Arbitrated BP - | field: EGU eV | io: input * - $(PREFIX):ArbitratedBP:Rate_RBV - longin - Arbitrated BP - | field: EGU Hz | io: input * - $(PREFIX):ArbitratedBP:Transmission_RBV - ai - Arbitrated BP - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):ArbitratedBP:Valid_RBV - bi - Arbitrated BP - | io: input * - $(PREFIX):ArbitratedBP:Veto_RBV - waveform - Arbitrated BP - | io: input * - $(PREFIX):CohortCounter_RBV - longin - Intrnl cohort counter - | io: input PMPS.FB_BeamParamAssertionPool ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ .. list-table:: :header-rows: 1 :align: center * - Record - Type - Description - Pragma * - $(PREFIX):Entry:001:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):Entry:001:Device_RBV - waveform - $(SYMBOL).epicsDataPool[1].sDevName - | io: input * - $(PREFIX):Entry:001:ID_RBV - longin - $(SYMBOL).epicsDataPool[1].nId - | io: input * - $(PREFIX):Entry:001:Live_RBV - bi - $(SYMBOL).epicsDataPool[1].LiveInTable - | io: input * - $(PREFIX):Entry:001:PhotonEnergyRanges_RBV - longin - $(SYMBOL).epicsDataPool[1].neVRange - | field: EGU eV | io: input * - $(PREFIX):Entry:001:Rate_RBV - longin - $(SYMBOL).epicsDataPool[1].nRate - | field: EGU Hz | io: input * - $(PREFIX):Entry:001:Transmission_RBV - ai - $(SYMBOL).epicsDataPool[1].nTran - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):Entry:001:Valid_RBV - bi - $(SYMBOL).epicsDataPool[1].xValid - | io: input * - $(PREFIX):Entry:001:Veto_RBV - waveform - $(SYMBOL).epicsDataPool[1].aVetoDevices - | io: input * - $(PREFIX):Entry:002:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):Entry:002:Device_RBV - waveform - $(SYMBOL).epicsDataPool[2].sDevName - | io: input * - $(PREFIX):Entry:002:ID_RBV - longin - $(SYMBOL).epicsDataPool[2].nId - | io: input * - $(PREFIX):Entry:002:Live_RBV - bi - $(SYMBOL).epicsDataPool[2].LiveInTable - | io: input * - $(PREFIX):Entry:002:PhotonEnergyRanges_RBV - longin - $(SYMBOL).epicsDataPool[2].neVRange - | field: EGU eV | io: input * - $(PREFIX):Entry:002:Rate_RBV - longin - $(SYMBOL).epicsDataPool[2].nRate - | field: EGU Hz | io: input * - $(PREFIX):Entry:002:Transmission_RBV - ai - $(SYMBOL).epicsDataPool[2].nTran - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):Entry:002:Valid_RBV - bi - $(SYMBOL).epicsDataPool[2].xValid - | io: input * - $(PREFIX):Entry:002:Veto_RBV - waveform - $(SYMBOL).epicsDataPool[2].aVetoDevices - | io: input * - $(PREFIX):Entry:003:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):Entry:003:Device_RBV - waveform - $(SYMBOL).epicsDataPool[3].sDevName - | io: input * - $(PREFIX):Entry:003:ID_RBV - longin - $(SYMBOL).epicsDataPool[3].nId - | io: input * - $(PREFIX):Entry:003:Live_RBV - bi - $(SYMBOL).epicsDataPool[3].LiveInTable - | io: input * - $(PREFIX):Entry:003:PhotonEnergyRanges_RBV - longin - $(SYMBOL).epicsDataPool[3].neVRange - | field: EGU eV | io: input * - $(PREFIX):Entry:003:Rate_RBV - longin - $(SYMBOL).epicsDataPool[3].nRate - | field: EGU Hz | io: input * - $(PREFIX):Entry:003:Transmission_RBV - ai - $(SYMBOL).epicsDataPool[3].nTran - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):Entry:003:Valid_RBV - bi - $(SYMBOL).epicsDataPool[3].xValid - | io: input * - $(PREFIX):Entry:003:Veto_RBV - waveform - $(SYMBOL).epicsDataPool[3].aVetoDevices - | io: input * - $(PREFIX):Entry:004:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):Entry:004:Device_RBV - waveform - $(SYMBOL).epicsDataPool[4].sDevName - | io: input * - $(PREFIX):Entry:004:ID_RBV - longin - $(SYMBOL).epicsDataPool[4].nId - | io: input * - $(PREFIX):Entry:004:Live_RBV - bi - $(SYMBOL).epicsDataPool[4].LiveInTable - | io: input * - $(PREFIX):Entry:004:PhotonEnergyRanges_RBV - longin - $(SYMBOL).epicsDataPool[4].neVRange - | field: EGU eV | io: input * - $(PREFIX):Entry:004:Rate_RBV - longin - $(SYMBOL).epicsDataPool[4].nRate - | field: EGU Hz | io: input * - $(PREFIX):Entry:004:Transmission_RBV - ai - $(SYMBOL).epicsDataPool[4].nTran - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):Entry:004:Valid_RBV - bi - $(SYMBOL).epicsDataPool[4].xValid - | io: input * - $(PREFIX):Entry:004:Veto_RBV - waveform - $(SYMBOL).epicsDataPool[4].aVetoDevices - | io: input * - $(PREFIX):Entry:005:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):Entry:005:Device_RBV - waveform - $(SYMBOL).epicsDataPool[5].sDevName - | io: input * - $(PREFIX):Entry:005:ID_RBV - longin - $(SYMBOL).epicsDataPool[5].nId - | io: input * - $(PREFIX):Entry:005:Live_RBV - bi - $(SYMBOL).epicsDataPool[5].LiveInTable - | io: input * - $(PREFIX):Entry:005:PhotonEnergyRanges_RBV - longin - $(SYMBOL).epicsDataPool[5].neVRange - | field: EGU eV | io: input * - $(PREFIX):Entry:005:Rate_RBV - longin - $(SYMBOL).epicsDataPool[5].nRate - | field: EGU Hz | io: input * - $(PREFIX):Entry:005:Transmission_RBV - ai - $(SYMBOL).epicsDataPool[5].nTran - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):Entry:005:Valid_RBV - bi - $(SYMBOL).epicsDataPool[5].xValid - | io: input * - $(PREFIX):Entry:005:Veto_RBV - waveform - $(SYMBOL).epicsDataPool[5].aVetoDevices - | io: input * - $(PREFIX):Entry:006:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):Entry:006:Device_RBV - waveform - $(SYMBOL).epicsDataPool[6].sDevName - | io: input * - $(PREFIX):Entry:006:ID_RBV - longin - $(SYMBOL).epicsDataPool[6].nId - | io: input * - $(PREFIX):Entry:006:Live_RBV - bi - $(SYMBOL).epicsDataPool[6].LiveInTable - | io: input * - $(PREFIX):Entry:006:PhotonEnergyRanges_RBV - longin - $(SYMBOL).epicsDataPool[6].neVRange - | field: EGU eV | io: input * - $(PREFIX):Entry:006:Rate_RBV - longin - $(SYMBOL).epicsDataPool[6].nRate - | field: EGU Hz | io: input * - $(PREFIX):Entry:006:Transmission_RBV - ai - $(SYMBOL).epicsDataPool[6].nTran - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):Entry:006:Valid_RBV - bi - $(SYMBOL).epicsDataPool[6].xValid - | io: input * - $(PREFIX):Entry:006:Veto_RBV - waveform - $(SYMBOL).epicsDataPool[6].aVetoDevices - | io: input * - $(PREFIX):Entry:007:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):Entry:007:Device_RBV - waveform - $(SYMBOL).epicsDataPool[7].sDevName - | io: input * - $(PREFIX):Entry:007:ID_RBV - longin - $(SYMBOL).epicsDataPool[7].nId - | io: input * - $(PREFIX):Entry:007:Live_RBV - bi - $(SYMBOL).epicsDataPool[7].LiveInTable - | io: input * - $(PREFIX):Entry:007:PhotonEnergyRanges_RBV - longin - $(SYMBOL).epicsDataPool[7].neVRange - | field: EGU eV | io: input * - $(PREFIX):Entry:007:Rate_RBV - longin - $(SYMBOL).epicsDataPool[7].nRate - | field: EGU Hz | io: input * - $(PREFIX):Entry:007:Transmission_RBV - ai - $(SYMBOL).epicsDataPool[7].nTran - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):Entry:007:Valid_RBV - bi - $(SYMBOL).epicsDataPool[7].xValid - | io: input * - $(PREFIX):Entry:007:Veto_RBV - waveform - $(SYMBOL).epicsDataPool[7].aVetoDevices - | io: input * - $(PREFIX):Entry:008:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):Entry:008:Device_RBV - waveform - $(SYMBOL).epicsDataPool[8].sDevName - | io: input * - $(PREFIX):Entry:008:ID_RBV - longin - $(SYMBOL).epicsDataPool[8].nId - | io: input * - $(PREFIX):Entry:008:Live_RBV - bi - $(SYMBOL).epicsDataPool[8].LiveInTable - | io: input * - $(PREFIX):Entry:008:PhotonEnergyRanges_RBV - longin - $(SYMBOL).epicsDataPool[8].neVRange - | field: EGU eV | io: input * - $(PREFIX):Entry:008:Rate_RBV - longin - $(SYMBOL).epicsDataPool[8].nRate - | field: EGU Hz | io: input * - $(PREFIX):Entry:008:Transmission_RBV - ai - $(SYMBOL).epicsDataPool[8].nTran - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):Entry:008:Valid_RBV - bi - $(SYMBOL).epicsDataPool[8].xValid - | io: input * - $(PREFIX):Entry:008:Veto_RBV - waveform - $(SYMBOL).epicsDataPool[8].aVetoDevices - | io: input * - $(PREFIX):Entry:009:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):Entry:009:Device_RBV - waveform - $(SYMBOL).epicsDataPool[9].sDevName - | io: input * - $(PREFIX):Entry:009:ID_RBV - longin - $(SYMBOL).epicsDataPool[9].nId - | io: input * - $(PREFIX):Entry:009:Live_RBV - bi - $(SYMBOL).epicsDataPool[9].LiveInTable - | io: input * - $(PREFIX):Entry:009:PhotonEnergyRanges_RBV - longin - $(SYMBOL).epicsDataPool[9].neVRange - | field: EGU eV | io: input * - $(PREFIX):Entry:009:Rate_RBV - longin - $(SYMBOL).epicsDataPool[9].nRate - | field: EGU Hz | io: input * - $(PREFIX):Entry:009:Transmission_RBV - ai - $(SYMBOL).epicsDataPool[9].nTran - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):Entry:009:Valid_RBV - bi - $(SYMBOL).epicsDataPool[9].xValid - | io: input * - $(PREFIX):Entry:009:Veto_RBV - waveform - $(SYMBOL).epicsDataPool[9].aVetoDevices - | io: input * - $(PREFIX):Entry:010:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):Entry:010:Device_RBV - waveform - $(SYMBOL).epicsDataPool[10].sDevName - | io: input * - $(PREFIX):Entry:010:ID_RBV - longin - $(SYMBOL).epicsDataPool[10].nId - | io: input * - $(PREFIX):Entry:010:Live_RBV - bi - $(SYMBOL).epicsDataPool[10].LiveInTable - | io: input * - $(PREFIX):Entry:010:PhotonEnergyRanges_RBV - longin - $(SYMBOL).epicsDataPool[10].neVRange - | field: EGU eV | io: input * - $(PREFIX):Entry:010:Rate_RBV - longin - $(SYMBOL).epicsDataPool[10].nRate - | field: EGU Hz | io: input * - $(PREFIX):Entry:010:Transmission_RBV - ai - $(SYMBOL).epicsDataPool[10].nTran - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):Entry:010:Valid_RBV - bi - $(SYMBOL).epicsDataPool[10].xValid - | io: input * - $(PREFIX):Entry:010:Veto_RBV - waveform - $(SYMBOL).epicsDataPool[10].aVetoDevices - | io: input * - $(PREFIX):Entry:011:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):Entry:011:Device_RBV - waveform - $(SYMBOL).epicsDataPool[11].sDevName - | io: input * - $(PREFIX):Entry:011:ID_RBV - longin - $(SYMBOL).epicsDataPool[11].nId - | io: input * - $(PREFIX):Entry:011:Live_RBV - bi - $(SYMBOL).epicsDataPool[11].LiveInTable - | io: input * - $(PREFIX):Entry:011:PhotonEnergyRanges_RBV - longin - $(SYMBOL).epicsDataPool[11].neVRange - | field: EGU eV | io: input * - $(PREFIX):Entry:011:Rate_RBV - longin - $(SYMBOL).epicsDataPool[11].nRate - | field: EGU Hz | io: input * - $(PREFIX):Entry:011:Transmission_RBV - ai - $(SYMBOL).epicsDataPool[11].nTran - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):Entry:011:Valid_RBV - bi - $(SYMBOL).epicsDataPool[11].xValid - | io: input * - $(PREFIX):Entry:011:Veto_RBV - waveform - $(SYMBOL).epicsDataPool[11].aVetoDevices - | io: input * - $(PREFIX):Entry:012:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):Entry:012:Device_RBV - waveform - $(SYMBOL).epicsDataPool[12].sDevName - | io: input * - $(PREFIX):Entry:012:ID_RBV - longin - $(SYMBOL).epicsDataPool[12].nId - | io: input * - $(PREFIX):Entry:012:Live_RBV - bi - $(SYMBOL).epicsDataPool[12].LiveInTable - | io: input * - $(PREFIX):Entry:012:PhotonEnergyRanges_RBV - longin - $(SYMBOL).epicsDataPool[12].neVRange - | field: EGU eV | io: input * - $(PREFIX):Entry:012:Rate_RBV - longin - $(SYMBOL).epicsDataPool[12].nRate - | field: EGU Hz | io: input * - $(PREFIX):Entry:012:Transmission_RBV - ai - $(SYMBOL).epicsDataPool[12].nTran - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):Entry:012:Valid_RBV - bi - $(SYMBOL).epicsDataPool[12].xValid - | io: input * - $(PREFIX):Entry:012:Veto_RBV - waveform - $(SYMBOL).epicsDataPool[12].aVetoDevices - | io: input * - $(PREFIX):Entry:013:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):Entry:013:Device_RBV - waveform - $(SYMBOL).epicsDataPool[13].sDevName - | io: input * - $(PREFIX):Entry:013:ID_RBV - longin - $(SYMBOL).epicsDataPool[13].nId - | io: input * - $(PREFIX):Entry:013:Live_RBV - bi - $(SYMBOL).epicsDataPool[13].LiveInTable - | io: input * - $(PREFIX):Entry:013:PhotonEnergyRanges_RBV - longin - $(SYMBOL).epicsDataPool[13].neVRange - | field: EGU eV | io: input * - $(PREFIX):Entry:013:Rate_RBV - longin - $(SYMBOL).epicsDataPool[13].nRate - | field: EGU Hz | io: input * - $(PREFIX):Entry:013:Transmission_RBV - ai - $(SYMBOL).epicsDataPool[13].nTran - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):Entry:013:Valid_RBV - bi - $(SYMBOL).epicsDataPool[13].xValid - | io: input * - $(PREFIX):Entry:013:Veto_RBV - waveform - $(SYMBOL).epicsDataPool[13].aVetoDevices - | io: input * - $(PREFIX):Entry:014:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):Entry:014:Device_RBV - waveform - $(SYMBOL).epicsDataPool[14].sDevName - | io: input * - $(PREFIX):Entry:014:ID_RBV - longin - $(SYMBOL).epicsDataPool[14].nId - | io: input * - $(PREFIX):Entry:014:Live_RBV - bi - $(SYMBOL).epicsDataPool[14].LiveInTable - | io: input * - $(PREFIX):Entry:014:PhotonEnergyRanges_RBV - longin - $(SYMBOL).epicsDataPool[14].neVRange - | field: EGU eV | io: input * - $(PREFIX):Entry:014:Rate_RBV - longin - $(SYMBOL).epicsDataPool[14].nRate - | field: EGU Hz | io: input * - $(PREFIX):Entry:014:Transmission_RBV - ai - $(SYMBOL).epicsDataPool[14].nTran - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):Entry:014:Valid_RBV - bi - $(SYMBOL).epicsDataPool[14].xValid - | io: input * - $(PREFIX):Entry:014:Veto_RBV - waveform - $(SYMBOL).epicsDataPool[14].aVetoDevices - | io: input * - $(PREFIX):Entry:015:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):Entry:015:Device_RBV - waveform - $(SYMBOL).epicsDataPool[15].sDevName - | io: input * - $(PREFIX):Entry:015:ID_RBV - longin - $(SYMBOL).epicsDataPool[15].nId - | io: input * - $(PREFIX):Entry:015:Live_RBV - bi - $(SYMBOL).epicsDataPool[15].LiveInTable - | io: input * - $(PREFIX):Entry:015:PhotonEnergyRanges_RBV - longin - $(SYMBOL).epicsDataPool[15].neVRange - | field: EGU eV | io: input * - $(PREFIX):Entry:015:Rate_RBV - longin - $(SYMBOL).epicsDataPool[15].nRate - | field: EGU Hz | io: input * - $(PREFIX):Entry:015:Transmission_RBV - ai - $(SYMBOL).epicsDataPool[15].nTran - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):Entry:015:Valid_RBV - bi - $(SYMBOL).epicsDataPool[15].xValid - | io: input * - $(PREFIX):Entry:015:Veto_RBV - waveform - $(SYMBOL).epicsDataPool[15].aVetoDevices - | io: input * - $(PREFIX):Entry:016:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):Entry:016:Device_RBV - waveform - $(SYMBOL).epicsDataPool[16].sDevName - | io: input * - $(PREFIX):Entry:016:ID_RBV - longin - $(SYMBOL).epicsDataPool[16].nId - | io: input * - $(PREFIX):Entry:016:Live_RBV - bi - $(SYMBOL).epicsDataPool[16].LiveInTable - | io: input * - $(PREFIX):Entry:016:PhotonEnergyRanges_RBV - longin - $(SYMBOL).epicsDataPool[16].neVRange - | field: EGU eV | io: input * - $(PREFIX):Entry:016:Rate_RBV - longin - $(SYMBOL).epicsDataPool[16].nRate - | field: EGU Hz | io: input * - $(PREFIX):Entry:016:Transmission_RBV - ai - $(SYMBOL).epicsDataPool[16].nTran - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):Entry:016:Valid_RBV - bi - $(SYMBOL).epicsDataPool[16].xValid - | io: input * - $(PREFIX):Entry:016:Veto_RBV - waveform - $(SYMBOL).epicsDataPool[16].aVetoDevices - | io: input * - $(PREFIX):Entry:017:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):Entry:017:Device_RBV - waveform - $(SYMBOL).epicsDataPool[17].sDevName - | io: input * - $(PREFIX):Entry:017:ID_RBV - longin - $(SYMBOL).epicsDataPool[17].nId - | io: input * - $(PREFIX):Entry:017:Live_RBV - bi - $(SYMBOL).epicsDataPool[17].LiveInTable - | io: input * - $(PREFIX):Entry:017:PhotonEnergyRanges_RBV - longin - $(SYMBOL).epicsDataPool[17].neVRange - | field: EGU eV | io: input * - $(PREFIX):Entry:017:Rate_RBV - longin - $(SYMBOL).epicsDataPool[17].nRate - | field: EGU Hz | io: input * - $(PREFIX):Entry:017:Transmission_RBV - ai - $(SYMBOL).epicsDataPool[17].nTran - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):Entry:017:Valid_RBV - bi - $(SYMBOL).epicsDataPool[17].xValid - | io: input * - $(PREFIX):Entry:017:Veto_RBV - waveform - $(SYMBOL).epicsDataPool[17].aVetoDevices - | io: input * - $(PREFIX):Entry:018:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):Entry:018:Device_RBV - waveform - $(SYMBOL).epicsDataPool[18].sDevName - | io: input * - $(PREFIX):Entry:018:ID_RBV - longin - $(SYMBOL).epicsDataPool[18].nId - | io: input * - $(PREFIX):Entry:018:Live_RBV - bi - $(SYMBOL).epicsDataPool[18].LiveInTable - | io: input * - $(PREFIX):Entry:018:PhotonEnergyRanges_RBV - longin - $(SYMBOL).epicsDataPool[18].neVRange - | field: EGU eV | io: input * - $(PREFIX):Entry:018:Rate_RBV - longin - $(SYMBOL).epicsDataPool[18].nRate - | field: EGU Hz | io: input * - $(PREFIX):Entry:018:Transmission_RBV - ai - $(SYMBOL).epicsDataPool[18].nTran - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):Entry:018:Valid_RBV - bi - $(SYMBOL).epicsDataPool[18].xValid - | io: input * - $(PREFIX):Entry:018:Veto_RBV - waveform - $(SYMBOL).epicsDataPool[18].aVetoDevices - | io: input * - $(PREFIX):Entry:019:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):Entry:019:Device_RBV - waveform - $(SYMBOL).epicsDataPool[19].sDevName - | io: input * - $(PREFIX):Entry:019:ID_RBV - longin - $(SYMBOL).epicsDataPool[19].nId - | io: input * - $(PREFIX):Entry:019:Live_RBV - bi - $(SYMBOL).epicsDataPool[19].LiveInTable - | io: input * - $(PREFIX):Entry:019:PhotonEnergyRanges_RBV - longin - $(SYMBOL).epicsDataPool[19].neVRange - | field: EGU eV | io: input * - $(PREFIX):Entry:019:Rate_RBV - longin - $(SYMBOL).epicsDataPool[19].nRate - | field: EGU Hz | io: input * - $(PREFIX):Entry:019:Transmission_RBV - ai - $(SYMBOL).epicsDataPool[19].nTran - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):Entry:019:Valid_RBV - bi - $(SYMBOL).epicsDataPool[19].xValid - | io: input * - $(PREFIX):Entry:019:Veto_RBV - waveform - $(SYMBOL).epicsDataPool[19].aVetoDevices - | io: input * - $(PREFIX):Entry:020:Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):Entry:020:Device_RBV - waveform - $(SYMBOL).epicsDataPool[20].sDevName - | io: input * - $(PREFIX):Entry:020:ID_RBV - longin - $(SYMBOL).epicsDataPool[20].nId - | io: input * - $(PREFIX):Entry:020:Live_RBV - bi - $(SYMBOL).epicsDataPool[20].LiveInTable - | io: input * - $(PREFIX):Entry:020:PhotonEnergyRanges_RBV - longin - $(SYMBOL).epicsDataPool[20].neVRange - | field: EGU eV | io: input * - $(PREFIX):Entry:020:Rate_RBV - longin - $(SYMBOL).epicsDataPool[20].nRate - | field: EGU Hz | io: input * - $(PREFIX):Entry:020:Transmission_RBV - ai - $(SYMBOL).epicsDataPool[20].nTran - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):Entry:020:Valid_RBV - bi - $(SYMBOL).epicsDataPool[20].xValid - | io: input * - $(PREFIX):Entry:020:Veto_RBV - waveform - $(SYMBOL).epicsDataPool[20].aVetoDevices - | io: input PMPS.FB_HardwareFFOutput ^^^^^^^^^^^^^^^^^^^^^^^^ .. list-table:: :header-rows: 1 :align: center * - Record - Type - Description - Pragma * - $(PREFIX):ClearFault - bo - Might be overidden by PLC writes - | io: output * - $(PREFIX):ClearFault_RBV - bi - Might be overidden by PLC writes - | io: output * - $(PREFIX):EnableVeto - bo - $(SYMBOL).i_xVeto - | io: output * - $(PREFIX):EnableVeto_RBV - bi - $(SYMBOL).i_xVeto - | io: output * - $(PREFIX):FaultHWO_RBV - bi - Hardware Output Status - | io: input * - $(PREFIX):FF:001:BeamPermitted_RBV - bi - $(SYMBOL).astFF[1].BeamPermitted - | io: input * - $(PREFIX):FF:001:Info:Desc_RBV - waveform - $(SYMBOL).astFF[1].Info.Desc - | io: input * - $(PREFIX):FF:001:Info:DevName_RBV - waveform - $(SYMBOL).astFF[1].Info.DevName - | io: input * - $(PREFIX):FF:001:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[1].Info.InfoString - | io: input * - $(PREFIX):FF:001:Info:InUse_RBV - bi - $(SYMBOL).astFF[1].Info.InUse - | io: input * - $(PREFIX):FF:001:Info:Path_RBV - waveform - $(SYMBOL).astFF[1].Info.sPath - | io: input * - $(PREFIX):FF:001:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[1].Info.TypeCode - | io: input * - $(PREFIX):FF:001:OK_RBV - bi - $(SYMBOL).astFF[1].OK - | io: input * - $(PREFIX):FF:001:Ovrd:Activate - bo - $(SYMBOL).astFF[1].Ovrd.Activate - | io: output * - $(PREFIX):FF:001:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[1].Ovrd.Activate - | io: output * - $(PREFIX):FF:001:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[1].Ovrd.Active - | io: input * - $(PREFIX):FF:001:Ovrd:Deactivate - bo - $(SYMBOL).astFF[1].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:001:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[1].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:001:Ovrd:Duration - longout - $(SYMBOL).astFF[1].Ovrd.Duration - | io: output * - $(PREFIX):FF:001:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[1].Ovrd.Duration - | io: output * - $(PREFIX):FF:001:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[1].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:001:Ovrd:Expiration - longout - $(SYMBOL).astFF[1].Ovrd.Expiration - | io: output * - $(PREFIX):FF:001:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[1].Ovrd.Expiration - | io: output * - $(PREFIX):FF:001:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[1].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:001:Ovrd:StartDT - longout - $(SYMBOL).astFF[1].Ovrd.StartDT - | io: output * - $(PREFIX):FF:001:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[1].Ovrd.StartDT - | io: output * - $(PREFIX):FF:001:Reset - bo - $(SYMBOL).astFF[1].Reset - | io: output * - $(PREFIX):FF:001:Reset_RBV - bi - $(SYMBOL).astFF[1].Reset - | io: output * - $(PREFIX):FF:002:BeamPermitted_RBV - bi - $(SYMBOL).astFF[2].BeamPermitted - | io: input * - $(PREFIX):FF:002:Info:Desc_RBV - waveform - $(SYMBOL).astFF[2].Info.Desc - | io: input * - $(PREFIX):FF:002:Info:DevName_RBV - waveform - $(SYMBOL).astFF[2].Info.DevName - | io: input * - $(PREFIX):FF:002:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[2].Info.InfoString - | io: input * - $(PREFIX):FF:002:Info:InUse_RBV - bi - $(SYMBOL).astFF[2].Info.InUse - | io: input * - $(PREFIX):FF:002:Info:Path_RBV - waveform - $(SYMBOL).astFF[2].Info.sPath - | io: input * - $(PREFIX):FF:002:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[2].Info.TypeCode - | io: input * - $(PREFIX):FF:002:OK_RBV - bi - $(SYMBOL).astFF[2].OK - | io: input * - $(PREFIX):FF:002:Ovrd:Activate - bo - $(SYMBOL).astFF[2].Ovrd.Activate - | io: output * - $(PREFIX):FF:002:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[2].Ovrd.Activate - | io: output * - $(PREFIX):FF:002:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[2].Ovrd.Active - | io: input * - $(PREFIX):FF:002:Ovrd:Deactivate - bo - $(SYMBOL).astFF[2].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:002:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[2].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:002:Ovrd:Duration - longout - $(SYMBOL).astFF[2].Ovrd.Duration - | io: output * - $(PREFIX):FF:002:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[2].Ovrd.Duration - | io: output * - $(PREFIX):FF:002:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[2].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:002:Ovrd:Expiration - longout - $(SYMBOL).astFF[2].Ovrd.Expiration - | io: output * - $(PREFIX):FF:002:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[2].Ovrd.Expiration - | io: output * - $(PREFIX):FF:002:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[2].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:002:Ovrd:StartDT - longout - $(SYMBOL).astFF[2].Ovrd.StartDT - | io: output * - $(PREFIX):FF:002:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[2].Ovrd.StartDT - | io: output * - $(PREFIX):FF:002:Reset - bo - $(SYMBOL).astFF[2].Reset - | io: output * - $(PREFIX):FF:002:Reset_RBV - bi - $(SYMBOL).astFF[2].Reset - | io: output * - $(PREFIX):FF:003:BeamPermitted_RBV - bi - $(SYMBOL).astFF[3].BeamPermitted - | io: input * - $(PREFIX):FF:003:Info:Desc_RBV - waveform - $(SYMBOL).astFF[3].Info.Desc - | io: input * - $(PREFIX):FF:003:Info:DevName_RBV - waveform - $(SYMBOL).astFF[3].Info.DevName - | io: input * - $(PREFIX):FF:003:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[3].Info.InfoString - | io: input * - $(PREFIX):FF:003:Info:InUse_RBV - bi - $(SYMBOL).astFF[3].Info.InUse - | io: input * - $(PREFIX):FF:003:Info:Path_RBV - waveform - $(SYMBOL).astFF[3].Info.sPath - | io: input * - $(PREFIX):FF:003:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[3].Info.TypeCode - | io: input * - $(PREFIX):FF:003:OK_RBV - bi - $(SYMBOL).astFF[3].OK - | io: input * - $(PREFIX):FF:003:Ovrd:Activate - bo - $(SYMBOL).astFF[3].Ovrd.Activate - | io: output * - $(PREFIX):FF:003:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[3].Ovrd.Activate - | io: output * - $(PREFIX):FF:003:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[3].Ovrd.Active - | io: input * - $(PREFIX):FF:003:Ovrd:Deactivate - bo - $(SYMBOL).astFF[3].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:003:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[3].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:003:Ovrd:Duration - longout - $(SYMBOL).astFF[3].Ovrd.Duration - | io: output * - $(PREFIX):FF:003:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[3].Ovrd.Duration - | io: output * - $(PREFIX):FF:003:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[3].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:003:Ovrd:Expiration - longout - $(SYMBOL).astFF[3].Ovrd.Expiration - | io: output * - $(PREFIX):FF:003:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[3].Ovrd.Expiration - | io: output * - $(PREFIX):FF:003:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[3].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:003:Ovrd:StartDT - longout - $(SYMBOL).astFF[3].Ovrd.StartDT - | io: output * - $(PREFIX):FF:003:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[3].Ovrd.StartDT - | io: output * - $(PREFIX):FF:003:Reset - bo - $(SYMBOL).astFF[3].Reset - | io: output * - $(PREFIX):FF:003:Reset_RBV - bi - $(SYMBOL).astFF[3].Reset - | io: output * - $(PREFIX):FF:004:BeamPermitted_RBV - bi - $(SYMBOL).astFF[4].BeamPermitted - | io: input * - $(PREFIX):FF:004:Info:Desc_RBV - waveform - $(SYMBOL).astFF[4].Info.Desc - | io: input * - $(PREFIX):FF:004:Info:DevName_RBV - waveform - $(SYMBOL).astFF[4].Info.DevName - | io: input * - $(PREFIX):FF:004:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[4].Info.InfoString - | io: input * - $(PREFIX):FF:004:Info:InUse_RBV - bi - $(SYMBOL).astFF[4].Info.InUse - | io: input * - $(PREFIX):FF:004:Info:Path_RBV - waveform - $(SYMBOL).astFF[4].Info.sPath - | io: input * - $(PREFIX):FF:004:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[4].Info.TypeCode - | io: input * - $(PREFIX):FF:004:OK_RBV - bi - $(SYMBOL).astFF[4].OK - | io: input * - $(PREFIX):FF:004:Ovrd:Activate - bo - $(SYMBOL).astFF[4].Ovrd.Activate - | io: output * - $(PREFIX):FF:004:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[4].Ovrd.Activate - | io: output * - $(PREFIX):FF:004:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[4].Ovrd.Active - | io: input * - $(PREFIX):FF:004:Ovrd:Deactivate - bo - $(SYMBOL).astFF[4].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:004:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[4].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:004:Ovrd:Duration - longout - $(SYMBOL).astFF[4].Ovrd.Duration - | io: output * - $(PREFIX):FF:004:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[4].Ovrd.Duration - | io: output * - $(PREFIX):FF:004:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[4].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:004:Ovrd:Expiration - longout - $(SYMBOL).astFF[4].Ovrd.Expiration - | io: output * - $(PREFIX):FF:004:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[4].Ovrd.Expiration - | io: output * - $(PREFIX):FF:004:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[4].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:004:Ovrd:StartDT - longout - $(SYMBOL).astFF[4].Ovrd.StartDT - | io: output * - $(PREFIX):FF:004:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[4].Ovrd.StartDT - | io: output * - $(PREFIX):FF:004:Reset - bo - $(SYMBOL).astFF[4].Reset - | io: output * - $(PREFIX):FF:004:Reset_RBV - bi - $(SYMBOL).astFF[4].Reset - | io: output * - $(PREFIX):FF:005:BeamPermitted_RBV - bi - $(SYMBOL).astFF[5].BeamPermitted - | io: input * - $(PREFIX):FF:005:Info:Desc_RBV - waveform - $(SYMBOL).astFF[5].Info.Desc - | io: input * - $(PREFIX):FF:005:Info:DevName_RBV - waveform - $(SYMBOL).astFF[5].Info.DevName - | io: input * - $(PREFIX):FF:005:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[5].Info.InfoString - | io: input * - $(PREFIX):FF:005:Info:InUse_RBV - bi - $(SYMBOL).astFF[5].Info.InUse - | io: input * - $(PREFIX):FF:005:Info:Path_RBV - waveform - $(SYMBOL).astFF[5].Info.sPath - | io: input * - $(PREFIX):FF:005:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[5].Info.TypeCode - | io: input * - $(PREFIX):FF:005:OK_RBV - bi - $(SYMBOL).astFF[5].OK - | io: input * - $(PREFIX):FF:005:Ovrd:Activate - bo - $(SYMBOL).astFF[5].Ovrd.Activate - | io: output * - $(PREFIX):FF:005:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[5].Ovrd.Activate - | io: output * - $(PREFIX):FF:005:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[5].Ovrd.Active - | io: input * - $(PREFIX):FF:005:Ovrd:Deactivate - bo - $(SYMBOL).astFF[5].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:005:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[5].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:005:Ovrd:Duration - longout - $(SYMBOL).astFF[5].Ovrd.Duration - | io: output * - $(PREFIX):FF:005:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[5].Ovrd.Duration - | io: output * - $(PREFIX):FF:005:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[5].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:005:Ovrd:Expiration - longout - $(SYMBOL).astFF[5].Ovrd.Expiration - | io: output * - $(PREFIX):FF:005:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[5].Ovrd.Expiration - | io: output * - $(PREFIX):FF:005:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[5].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:005:Ovrd:StartDT - longout - $(SYMBOL).astFF[5].Ovrd.StartDT - | io: output * - $(PREFIX):FF:005:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[5].Ovrd.StartDT - | io: output * - $(PREFIX):FF:005:Reset - bo - $(SYMBOL).astFF[5].Reset - | io: output * - $(PREFIX):FF:005:Reset_RBV - bi - $(SYMBOL).astFF[5].Reset - | io: output * - $(PREFIX):FF:006:BeamPermitted_RBV - bi - $(SYMBOL).astFF[6].BeamPermitted - | io: input * - $(PREFIX):FF:006:Info:Desc_RBV - waveform - $(SYMBOL).astFF[6].Info.Desc - | io: input * - $(PREFIX):FF:006:Info:DevName_RBV - waveform - $(SYMBOL).astFF[6].Info.DevName - | io: input * - $(PREFIX):FF:006:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[6].Info.InfoString - | io: input * - $(PREFIX):FF:006:Info:InUse_RBV - bi - $(SYMBOL).astFF[6].Info.InUse - | io: input * - $(PREFIX):FF:006:Info:Path_RBV - waveform - $(SYMBOL).astFF[6].Info.sPath - | io: input * - $(PREFIX):FF:006:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[6].Info.TypeCode - | io: input * - $(PREFIX):FF:006:OK_RBV - bi - $(SYMBOL).astFF[6].OK - | io: input * - $(PREFIX):FF:006:Ovrd:Activate - bo - $(SYMBOL).astFF[6].Ovrd.Activate - | io: output * - $(PREFIX):FF:006:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[6].Ovrd.Activate - | io: output * - $(PREFIX):FF:006:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[6].Ovrd.Active - | io: input * - $(PREFIX):FF:006:Ovrd:Deactivate - bo - $(SYMBOL).astFF[6].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:006:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[6].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:006:Ovrd:Duration - longout - $(SYMBOL).astFF[6].Ovrd.Duration - | io: output * - $(PREFIX):FF:006:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[6].Ovrd.Duration - | io: output * - $(PREFIX):FF:006:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[6].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:006:Ovrd:Expiration - longout - $(SYMBOL).astFF[6].Ovrd.Expiration - | io: output * - $(PREFIX):FF:006:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[6].Ovrd.Expiration - | io: output * - $(PREFIX):FF:006:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[6].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:006:Ovrd:StartDT - longout - $(SYMBOL).astFF[6].Ovrd.StartDT - | io: output * - $(PREFIX):FF:006:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[6].Ovrd.StartDT - | io: output * - $(PREFIX):FF:006:Reset - bo - $(SYMBOL).astFF[6].Reset - | io: output * - $(PREFIX):FF:006:Reset_RBV - bi - $(SYMBOL).astFF[6].Reset - | io: output * - $(PREFIX):FF:007:BeamPermitted_RBV - bi - $(SYMBOL).astFF[7].BeamPermitted - | io: input * - $(PREFIX):FF:007:Info:Desc_RBV - waveform - $(SYMBOL).astFF[7].Info.Desc - | io: input * - $(PREFIX):FF:007:Info:DevName_RBV - waveform - $(SYMBOL).astFF[7].Info.DevName - | io: input * - $(PREFIX):FF:007:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[7].Info.InfoString - | io: input * - $(PREFIX):FF:007:Info:InUse_RBV - bi - $(SYMBOL).astFF[7].Info.InUse - | io: input * - $(PREFIX):FF:007:Info:Path_RBV - waveform - $(SYMBOL).astFF[7].Info.sPath - | io: input * - $(PREFIX):FF:007:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[7].Info.TypeCode - | io: input * - $(PREFIX):FF:007:OK_RBV - bi - $(SYMBOL).astFF[7].OK - | io: input * - $(PREFIX):FF:007:Ovrd:Activate - bo - $(SYMBOL).astFF[7].Ovrd.Activate - | io: output * - $(PREFIX):FF:007:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[7].Ovrd.Activate - | io: output * - $(PREFIX):FF:007:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[7].Ovrd.Active - | io: input * - $(PREFIX):FF:007:Ovrd:Deactivate - bo - $(SYMBOL).astFF[7].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:007:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[7].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:007:Ovrd:Duration - longout - $(SYMBOL).astFF[7].Ovrd.Duration - | io: output * - $(PREFIX):FF:007:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[7].Ovrd.Duration - | io: output * - $(PREFIX):FF:007:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[7].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:007:Ovrd:Expiration - longout - $(SYMBOL).astFF[7].Ovrd.Expiration - | io: output * - $(PREFIX):FF:007:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[7].Ovrd.Expiration - | io: output * - $(PREFIX):FF:007:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[7].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:007:Ovrd:StartDT - longout - $(SYMBOL).astFF[7].Ovrd.StartDT - | io: output * - $(PREFIX):FF:007:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[7].Ovrd.StartDT - | io: output * - $(PREFIX):FF:007:Reset - bo - $(SYMBOL).astFF[7].Reset - | io: output * - $(PREFIX):FF:007:Reset_RBV - bi - $(SYMBOL).astFF[7].Reset - | io: output * - $(PREFIX):FF:008:BeamPermitted_RBV - bi - $(SYMBOL).astFF[8].BeamPermitted - | io: input * - $(PREFIX):FF:008:Info:Desc_RBV - waveform - $(SYMBOL).astFF[8].Info.Desc - | io: input * - $(PREFIX):FF:008:Info:DevName_RBV - waveform - $(SYMBOL).astFF[8].Info.DevName - | io: input * - $(PREFIX):FF:008:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[8].Info.InfoString - | io: input * - $(PREFIX):FF:008:Info:InUse_RBV - bi - $(SYMBOL).astFF[8].Info.InUse - | io: input * - $(PREFIX):FF:008:Info:Path_RBV - waveform - $(SYMBOL).astFF[8].Info.sPath - | io: input * - $(PREFIX):FF:008:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[8].Info.TypeCode - | io: input * - $(PREFIX):FF:008:OK_RBV - bi - $(SYMBOL).astFF[8].OK - | io: input * - $(PREFIX):FF:008:Ovrd:Activate - bo - $(SYMBOL).astFF[8].Ovrd.Activate - | io: output * - $(PREFIX):FF:008:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[8].Ovrd.Activate - | io: output * - $(PREFIX):FF:008:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[8].Ovrd.Active - | io: input * - $(PREFIX):FF:008:Ovrd:Deactivate - bo - $(SYMBOL).astFF[8].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:008:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[8].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:008:Ovrd:Duration - longout - $(SYMBOL).astFF[8].Ovrd.Duration - | io: output * - $(PREFIX):FF:008:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[8].Ovrd.Duration - | io: output * - $(PREFIX):FF:008:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[8].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:008:Ovrd:Expiration - longout - $(SYMBOL).astFF[8].Ovrd.Expiration - | io: output * - $(PREFIX):FF:008:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[8].Ovrd.Expiration - | io: output * - $(PREFIX):FF:008:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[8].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:008:Ovrd:StartDT - longout - $(SYMBOL).astFF[8].Ovrd.StartDT - | io: output * - $(PREFIX):FF:008:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[8].Ovrd.StartDT - | io: output * - $(PREFIX):FF:008:Reset - bo - $(SYMBOL).astFF[8].Reset - | io: output * - $(PREFIX):FF:008:Reset_RBV - bi - $(SYMBOL).astFF[8].Reset - | io: output * - $(PREFIX):FF:009:BeamPermitted_RBV - bi - $(SYMBOL).astFF[9].BeamPermitted - | io: input * - $(PREFIX):FF:009:Info:Desc_RBV - waveform - $(SYMBOL).astFF[9].Info.Desc - | io: input * - $(PREFIX):FF:009:Info:DevName_RBV - waveform - $(SYMBOL).astFF[9].Info.DevName - | io: input * - $(PREFIX):FF:009:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[9].Info.InfoString - | io: input * - $(PREFIX):FF:009:Info:InUse_RBV - bi - $(SYMBOL).astFF[9].Info.InUse - | io: input * - $(PREFIX):FF:009:Info:Path_RBV - waveform - $(SYMBOL).astFF[9].Info.sPath - | io: input * - $(PREFIX):FF:009:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[9].Info.TypeCode - | io: input * - $(PREFIX):FF:009:OK_RBV - bi - $(SYMBOL).astFF[9].OK - | io: input * - $(PREFIX):FF:009:Ovrd:Activate - bo - $(SYMBOL).astFF[9].Ovrd.Activate - | io: output * - $(PREFIX):FF:009:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[9].Ovrd.Activate - | io: output * - $(PREFIX):FF:009:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[9].Ovrd.Active - | io: input * - $(PREFIX):FF:009:Ovrd:Deactivate - bo - $(SYMBOL).astFF[9].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:009:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[9].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:009:Ovrd:Duration - longout - $(SYMBOL).astFF[9].Ovrd.Duration - | io: output * - $(PREFIX):FF:009:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[9].Ovrd.Duration - | io: output * - $(PREFIX):FF:009:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[9].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:009:Ovrd:Expiration - longout - $(SYMBOL).astFF[9].Ovrd.Expiration - | io: output * - $(PREFIX):FF:009:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[9].Ovrd.Expiration - | io: output * - $(PREFIX):FF:009:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[9].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:009:Ovrd:StartDT - longout - $(SYMBOL).astFF[9].Ovrd.StartDT - | io: output * - $(PREFIX):FF:009:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[9].Ovrd.StartDT - | io: output * - $(PREFIX):FF:009:Reset - bo - $(SYMBOL).astFF[9].Reset - | io: output * - $(PREFIX):FF:009:Reset_RBV - bi - $(SYMBOL).astFF[9].Reset - | io: output * - $(PREFIX):FF:010:BeamPermitted_RBV - bi - $(SYMBOL).astFF[10].BeamPermitted - | io: input * - $(PREFIX):FF:010:Info:Desc_RBV - waveform - $(SYMBOL).astFF[10].Info.Desc - | io: input * - $(PREFIX):FF:010:Info:DevName_RBV - waveform - $(SYMBOL).astFF[10].Info.DevName - | io: input * - $(PREFIX):FF:010:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[10].Info.InfoString - | io: input * - $(PREFIX):FF:010:Info:InUse_RBV - bi - $(SYMBOL).astFF[10].Info.InUse - | io: input * - $(PREFIX):FF:010:Info:Path_RBV - waveform - $(SYMBOL).astFF[10].Info.sPath - | io: input * - $(PREFIX):FF:010:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[10].Info.TypeCode - | io: input * - $(PREFIX):FF:010:OK_RBV - bi - $(SYMBOL).astFF[10].OK - | io: input * - $(PREFIX):FF:010:Ovrd:Activate - bo - $(SYMBOL).astFF[10].Ovrd.Activate - | io: output * - $(PREFIX):FF:010:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[10].Ovrd.Activate - | io: output * - $(PREFIX):FF:010:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[10].Ovrd.Active - | io: input * - $(PREFIX):FF:010:Ovrd:Deactivate - bo - $(SYMBOL).astFF[10].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:010:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[10].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:010:Ovrd:Duration - longout - $(SYMBOL).astFF[10].Ovrd.Duration - | io: output * - $(PREFIX):FF:010:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[10].Ovrd.Duration - | io: output * - $(PREFIX):FF:010:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[10].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:010:Ovrd:Expiration - longout - $(SYMBOL).astFF[10].Ovrd.Expiration - | io: output * - $(PREFIX):FF:010:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[10].Ovrd.Expiration - | io: output * - $(PREFIX):FF:010:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[10].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:010:Ovrd:StartDT - longout - $(SYMBOL).astFF[10].Ovrd.StartDT - | io: output * - $(PREFIX):FF:010:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[10].Ovrd.StartDT - | io: output * - $(PREFIX):FF:010:Reset - bo - $(SYMBOL).astFF[10].Reset - | io: output * - $(PREFIX):FF:010:Reset_RBV - bi - $(SYMBOL).astFF[10].Reset - | io: output * - $(PREFIX):FF:011:BeamPermitted_RBV - bi - $(SYMBOL).astFF[11].BeamPermitted - | io: input * - $(PREFIX):FF:011:Info:Desc_RBV - waveform - $(SYMBOL).astFF[11].Info.Desc - | io: input * - $(PREFIX):FF:011:Info:DevName_RBV - waveform - $(SYMBOL).astFF[11].Info.DevName - | io: input * - $(PREFIX):FF:011:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[11].Info.InfoString - | io: input * - $(PREFIX):FF:011:Info:InUse_RBV - bi - $(SYMBOL).astFF[11].Info.InUse - | io: input * - $(PREFIX):FF:011:Info:Path_RBV - waveform - $(SYMBOL).astFF[11].Info.sPath - | io: input * - $(PREFIX):FF:011:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[11].Info.TypeCode - | io: input * - $(PREFIX):FF:011:OK_RBV - bi - $(SYMBOL).astFF[11].OK - | io: input * - $(PREFIX):FF:011:Ovrd:Activate - bo - $(SYMBOL).astFF[11].Ovrd.Activate - | io: output * - $(PREFIX):FF:011:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[11].Ovrd.Activate - | io: output * - $(PREFIX):FF:011:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[11].Ovrd.Active - | io: input * - $(PREFIX):FF:011:Ovrd:Deactivate - bo - $(SYMBOL).astFF[11].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:011:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[11].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:011:Ovrd:Duration - longout - $(SYMBOL).astFF[11].Ovrd.Duration - | io: output * - $(PREFIX):FF:011:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[11].Ovrd.Duration - | io: output * - $(PREFIX):FF:011:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[11].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:011:Ovrd:Expiration - longout - $(SYMBOL).astFF[11].Ovrd.Expiration - | io: output * - $(PREFIX):FF:011:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[11].Ovrd.Expiration - | io: output * - $(PREFIX):FF:011:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[11].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:011:Ovrd:StartDT - longout - $(SYMBOL).astFF[11].Ovrd.StartDT - | io: output * - $(PREFIX):FF:011:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[11].Ovrd.StartDT - | io: output * - $(PREFIX):FF:011:Reset - bo - $(SYMBOL).astFF[11].Reset - | io: output * - $(PREFIX):FF:011:Reset_RBV - bi - $(SYMBOL).astFF[11].Reset - | io: output * - $(PREFIX):FF:012:BeamPermitted_RBV - bi - $(SYMBOL).astFF[12].BeamPermitted - | io: input * - $(PREFIX):FF:012:Info:Desc_RBV - waveform - $(SYMBOL).astFF[12].Info.Desc - | io: input * - $(PREFIX):FF:012:Info:DevName_RBV - waveform - $(SYMBOL).astFF[12].Info.DevName - | io: input * - $(PREFIX):FF:012:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[12].Info.InfoString - | io: input * - $(PREFIX):FF:012:Info:InUse_RBV - bi - $(SYMBOL).astFF[12].Info.InUse - | io: input * - $(PREFIX):FF:012:Info:Path_RBV - waveform - $(SYMBOL).astFF[12].Info.sPath - | io: input * - $(PREFIX):FF:012:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[12].Info.TypeCode - | io: input * - $(PREFIX):FF:012:OK_RBV - bi - $(SYMBOL).astFF[12].OK - | io: input * - $(PREFIX):FF:012:Ovrd:Activate - bo - $(SYMBOL).astFF[12].Ovrd.Activate - | io: output * - $(PREFIX):FF:012:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[12].Ovrd.Activate - | io: output * - $(PREFIX):FF:012:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[12].Ovrd.Active - | io: input * - $(PREFIX):FF:012:Ovrd:Deactivate - bo - $(SYMBOL).astFF[12].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:012:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[12].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:012:Ovrd:Duration - longout - $(SYMBOL).astFF[12].Ovrd.Duration - | io: output * - $(PREFIX):FF:012:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[12].Ovrd.Duration - | io: output * - $(PREFIX):FF:012:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[12].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:012:Ovrd:Expiration - longout - $(SYMBOL).astFF[12].Ovrd.Expiration - | io: output * - $(PREFIX):FF:012:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[12].Ovrd.Expiration - | io: output * - $(PREFIX):FF:012:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[12].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:012:Ovrd:StartDT - longout - $(SYMBOL).astFF[12].Ovrd.StartDT - | io: output * - $(PREFIX):FF:012:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[12].Ovrd.StartDT - | io: output * - $(PREFIX):FF:012:Reset - bo - $(SYMBOL).astFF[12].Reset - | io: output * - $(PREFIX):FF:012:Reset_RBV - bi - $(SYMBOL).astFF[12].Reset - | io: output * - $(PREFIX):FF:013:BeamPermitted_RBV - bi - $(SYMBOL).astFF[13].BeamPermitted - | io: input * - $(PREFIX):FF:013:Info:Desc_RBV - waveform - $(SYMBOL).astFF[13].Info.Desc - | io: input * - $(PREFIX):FF:013:Info:DevName_RBV - waveform - $(SYMBOL).astFF[13].Info.DevName - | io: input * - $(PREFIX):FF:013:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[13].Info.InfoString - | io: input * - $(PREFIX):FF:013:Info:InUse_RBV - bi - $(SYMBOL).astFF[13].Info.InUse - | io: input * - $(PREFIX):FF:013:Info:Path_RBV - waveform - $(SYMBOL).astFF[13].Info.sPath - | io: input * - $(PREFIX):FF:013:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[13].Info.TypeCode - | io: input * - $(PREFIX):FF:013:OK_RBV - bi - $(SYMBOL).astFF[13].OK - | io: input * - $(PREFIX):FF:013:Ovrd:Activate - bo - $(SYMBOL).astFF[13].Ovrd.Activate - | io: output * - $(PREFIX):FF:013:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[13].Ovrd.Activate - | io: output * - $(PREFIX):FF:013:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[13].Ovrd.Active - | io: input * - $(PREFIX):FF:013:Ovrd:Deactivate - bo - $(SYMBOL).astFF[13].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:013:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[13].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:013:Ovrd:Duration - longout - $(SYMBOL).astFF[13].Ovrd.Duration - | io: output * - $(PREFIX):FF:013:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[13].Ovrd.Duration - | io: output * - $(PREFIX):FF:013:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[13].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:013:Ovrd:Expiration - longout - $(SYMBOL).astFF[13].Ovrd.Expiration - | io: output * - $(PREFIX):FF:013:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[13].Ovrd.Expiration - | io: output * - $(PREFIX):FF:013:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[13].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:013:Ovrd:StartDT - longout - $(SYMBOL).astFF[13].Ovrd.StartDT - | io: output * - $(PREFIX):FF:013:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[13].Ovrd.StartDT - | io: output * - $(PREFIX):FF:013:Reset - bo - $(SYMBOL).astFF[13].Reset - | io: output * - $(PREFIX):FF:013:Reset_RBV - bi - $(SYMBOL).astFF[13].Reset - | io: output * - $(PREFIX):FF:014:BeamPermitted_RBV - bi - $(SYMBOL).astFF[14].BeamPermitted - | io: input * - $(PREFIX):FF:014:Info:Desc_RBV - waveform - $(SYMBOL).astFF[14].Info.Desc - | io: input * - $(PREFIX):FF:014:Info:DevName_RBV - waveform - $(SYMBOL).astFF[14].Info.DevName - | io: input * - $(PREFIX):FF:014:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[14].Info.InfoString - | io: input * - $(PREFIX):FF:014:Info:InUse_RBV - bi - $(SYMBOL).astFF[14].Info.InUse - | io: input * - $(PREFIX):FF:014:Info:Path_RBV - waveform - $(SYMBOL).astFF[14].Info.sPath - | io: input * - $(PREFIX):FF:014:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[14].Info.TypeCode - | io: input * - $(PREFIX):FF:014:OK_RBV - bi - $(SYMBOL).astFF[14].OK - | io: input * - $(PREFIX):FF:014:Ovrd:Activate - bo - $(SYMBOL).astFF[14].Ovrd.Activate - | io: output * - $(PREFIX):FF:014:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[14].Ovrd.Activate - | io: output * - $(PREFIX):FF:014:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[14].Ovrd.Active - | io: input * - $(PREFIX):FF:014:Ovrd:Deactivate - bo - $(SYMBOL).astFF[14].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:014:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[14].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:014:Ovrd:Duration - longout - $(SYMBOL).astFF[14].Ovrd.Duration - | io: output * - $(PREFIX):FF:014:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[14].Ovrd.Duration - | io: output * - $(PREFIX):FF:014:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[14].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:014:Ovrd:Expiration - longout - $(SYMBOL).astFF[14].Ovrd.Expiration - | io: output * - $(PREFIX):FF:014:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[14].Ovrd.Expiration - | io: output * - $(PREFIX):FF:014:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[14].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:014:Ovrd:StartDT - longout - $(SYMBOL).astFF[14].Ovrd.StartDT - | io: output * - $(PREFIX):FF:014:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[14].Ovrd.StartDT - | io: output * - $(PREFIX):FF:014:Reset - bo - $(SYMBOL).astFF[14].Reset - | io: output * - $(PREFIX):FF:014:Reset_RBV - bi - $(SYMBOL).astFF[14].Reset - | io: output * - $(PREFIX):FF:015:BeamPermitted_RBV - bi - $(SYMBOL).astFF[15].BeamPermitted - | io: input * - $(PREFIX):FF:015:Info:Desc_RBV - waveform - $(SYMBOL).astFF[15].Info.Desc - | io: input * - $(PREFIX):FF:015:Info:DevName_RBV - waveform - $(SYMBOL).astFF[15].Info.DevName - | io: input * - $(PREFIX):FF:015:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[15].Info.InfoString - | io: input * - $(PREFIX):FF:015:Info:InUse_RBV - bi - $(SYMBOL).astFF[15].Info.InUse - | io: input * - $(PREFIX):FF:015:Info:Path_RBV - waveform - $(SYMBOL).astFF[15].Info.sPath - | io: input * - $(PREFIX):FF:015:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[15].Info.TypeCode - | io: input * - $(PREFIX):FF:015:OK_RBV - bi - $(SYMBOL).astFF[15].OK - | io: input * - $(PREFIX):FF:015:Ovrd:Activate - bo - $(SYMBOL).astFF[15].Ovrd.Activate - | io: output * - $(PREFIX):FF:015:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[15].Ovrd.Activate - | io: output * - $(PREFIX):FF:015:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[15].Ovrd.Active - | io: input * - $(PREFIX):FF:015:Ovrd:Deactivate - bo - $(SYMBOL).astFF[15].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:015:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[15].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:015:Ovrd:Duration - longout - $(SYMBOL).astFF[15].Ovrd.Duration - | io: output * - $(PREFIX):FF:015:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[15].Ovrd.Duration - | io: output * - $(PREFIX):FF:015:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[15].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:015:Ovrd:Expiration - longout - $(SYMBOL).astFF[15].Ovrd.Expiration - | io: output * - $(PREFIX):FF:015:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[15].Ovrd.Expiration - | io: output * - $(PREFIX):FF:015:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[15].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:015:Ovrd:StartDT - longout - $(SYMBOL).astFF[15].Ovrd.StartDT - | io: output * - $(PREFIX):FF:015:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[15].Ovrd.StartDT - | io: output * - $(PREFIX):FF:015:Reset - bo - $(SYMBOL).astFF[15].Reset - | io: output * - $(PREFIX):FF:015:Reset_RBV - bi - $(SYMBOL).astFF[15].Reset - | io: output * - $(PREFIX):FF:016:BeamPermitted_RBV - bi - $(SYMBOL).astFF[16].BeamPermitted - | io: input * - $(PREFIX):FF:016:Info:Desc_RBV - waveform - $(SYMBOL).astFF[16].Info.Desc - | io: input * - $(PREFIX):FF:016:Info:DevName_RBV - waveform - $(SYMBOL).astFF[16].Info.DevName - | io: input * - $(PREFIX):FF:016:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[16].Info.InfoString - | io: input * - $(PREFIX):FF:016:Info:InUse_RBV - bi - $(SYMBOL).astFF[16].Info.InUse - | io: input * - $(PREFIX):FF:016:Info:Path_RBV - waveform - $(SYMBOL).astFF[16].Info.sPath - | io: input * - $(PREFIX):FF:016:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[16].Info.TypeCode - | io: input * - $(PREFIX):FF:016:OK_RBV - bi - $(SYMBOL).astFF[16].OK - | io: input * - $(PREFIX):FF:016:Ovrd:Activate - bo - $(SYMBOL).astFF[16].Ovrd.Activate - | io: output * - $(PREFIX):FF:016:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[16].Ovrd.Activate - | io: output * - $(PREFIX):FF:016:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[16].Ovrd.Active - | io: input * - $(PREFIX):FF:016:Ovrd:Deactivate - bo - $(SYMBOL).astFF[16].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:016:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[16].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:016:Ovrd:Duration - longout - $(SYMBOL).astFF[16].Ovrd.Duration - | io: output * - $(PREFIX):FF:016:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[16].Ovrd.Duration - | io: output * - $(PREFIX):FF:016:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[16].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:016:Ovrd:Expiration - longout - $(SYMBOL).astFF[16].Ovrd.Expiration - | io: output * - $(PREFIX):FF:016:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[16].Ovrd.Expiration - | io: output * - $(PREFIX):FF:016:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[16].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:016:Ovrd:StartDT - longout - $(SYMBOL).astFF[16].Ovrd.StartDT - | io: output * - $(PREFIX):FF:016:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[16].Ovrd.StartDT - | io: output * - $(PREFIX):FF:016:Reset - bo - $(SYMBOL).astFF[16].Reset - | io: output * - $(PREFIX):FF:016:Reset_RBV - bi - $(SYMBOL).astFF[16].Reset - | io: output * - $(PREFIX):FF:017:BeamPermitted_RBV - bi - $(SYMBOL).astFF[17].BeamPermitted - | io: input * - $(PREFIX):FF:017:Info:Desc_RBV - waveform - $(SYMBOL).astFF[17].Info.Desc - | io: input * - $(PREFIX):FF:017:Info:DevName_RBV - waveform - $(SYMBOL).astFF[17].Info.DevName - | io: input * - $(PREFIX):FF:017:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[17].Info.InfoString - | io: input * - $(PREFIX):FF:017:Info:InUse_RBV - bi - $(SYMBOL).astFF[17].Info.InUse - | io: input * - $(PREFIX):FF:017:Info:Path_RBV - waveform - $(SYMBOL).astFF[17].Info.sPath - | io: input * - $(PREFIX):FF:017:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[17].Info.TypeCode - | io: input * - $(PREFIX):FF:017:OK_RBV - bi - $(SYMBOL).astFF[17].OK - | io: input * - $(PREFIX):FF:017:Ovrd:Activate - bo - $(SYMBOL).astFF[17].Ovrd.Activate - | io: output * - $(PREFIX):FF:017:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[17].Ovrd.Activate - | io: output * - $(PREFIX):FF:017:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[17].Ovrd.Active - | io: input * - $(PREFIX):FF:017:Ovrd:Deactivate - bo - $(SYMBOL).astFF[17].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:017:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[17].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:017:Ovrd:Duration - longout - $(SYMBOL).astFF[17].Ovrd.Duration - | io: output * - $(PREFIX):FF:017:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[17].Ovrd.Duration - | io: output * - $(PREFIX):FF:017:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[17].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:017:Ovrd:Expiration - longout - $(SYMBOL).astFF[17].Ovrd.Expiration - | io: output * - $(PREFIX):FF:017:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[17].Ovrd.Expiration - | io: output * - $(PREFIX):FF:017:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[17].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:017:Ovrd:StartDT - longout - $(SYMBOL).astFF[17].Ovrd.StartDT - | io: output * - $(PREFIX):FF:017:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[17].Ovrd.StartDT - | io: output * - $(PREFIX):FF:017:Reset - bo - $(SYMBOL).astFF[17].Reset - | io: output * - $(PREFIX):FF:017:Reset_RBV - bi - $(SYMBOL).astFF[17].Reset - | io: output * - $(PREFIX):FF:018:BeamPermitted_RBV - bi - $(SYMBOL).astFF[18].BeamPermitted - | io: input * - $(PREFIX):FF:018:Info:Desc_RBV - waveform - $(SYMBOL).astFF[18].Info.Desc - | io: input * - $(PREFIX):FF:018:Info:DevName_RBV - waveform - $(SYMBOL).astFF[18].Info.DevName - | io: input * - $(PREFIX):FF:018:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[18].Info.InfoString - | io: input * - $(PREFIX):FF:018:Info:InUse_RBV - bi - $(SYMBOL).astFF[18].Info.InUse - | io: input * - $(PREFIX):FF:018:Info:Path_RBV - waveform - $(SYMBOL).astFF[18].Info.sPath - | io: input * - $(PREFIX):FF:018:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[18].Info.TypeCode - | io: input * - $(PREFIX):FF:018:OK_RBV - bi - $(SYMBOL).astFF[18].OK - | io: input * - $(PREFIX):FF:018:Ovrd:Activate - bo - $(SYMBOL).astFF[18].Ovrd.Activate - | io: output * - $(PREFIX):FF:018:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[18].Ovrd.Activate - | io: output * - $(PREFIX):FF:018:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[18].Ovrd.Active - | io: input * - $(PREFIX):FF:018:Ovrd:Deactivate - bo - $(SYMBOL).astFF[18].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:018:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[18].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:018:Ovrd:Duration - longout - $(SYMBOL).astFF[18].Ovrd.Duration - | io: output * - $(PREFIX):FF:018:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[18].Ovrd.Duration - | io: output * - $(PREFIX):FF:018:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[18].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:018:Ovrd:Expiration - longout - $(SYMBOL).astFF[18].Ovrd.Expiration - | io: output * - $(PREFIX):FF:018:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[18].Ovrd.Expiration - | io: output * - $(PREFIX):FF:018:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[18].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:018:Ovrd:StartDT - longout - $(SYMBOL).astFF[18].Ovrd.StartDT - | io: output * - $(PREFIX):FF:018:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[18].Ovrd.StartDT - | io: output * - $(PREFIX):FF:018:Reset - bo - $(SYMBOL).astFF[18].Reset - | io: output * - $(PREFIX):FF:018:Reset_RBV - bi - $(SYMBOL).astFF[18].Reset - | io: output * - $(PREFIX):FF:019:BeamPermitted_RBV - bi - $(SYMBOL).astFF[19].BeamPermitted - | io: input * - $(PREFIX):FF:019:Info:Desc_RBV - waveform - $(SYMBOL).astFF[19].Info.Desc - | io: input * - $(PREFIX):FF:019:Info:DevName_RBV - waveform - $(SYMBOL).astFF[19].Info.DevName - | io: input * - $(PREFIX):FF:019:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[19].Info.InfoString - | io: input * - $(PREFIX):FF:019:Info:InUse_RBV - bi - $(SYMBOL).astFF[19].Info.InUse - | io: input * - $(PREFIX):FF:019:Info:Path_RBV - waveform - $(SYMBOL).astFF[19].Info.sPath - | io: input * - $(PREFIX):FF:019:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[19].Info.TypeCode - | io: input * - $(PREFIX):FF:019:OK_RBV - bi - $(SYMBOL).astFF[19].OK - | io: input * - $(PREFIX):FF:019:Ovrd:Activate - bo - $(SYMBOL).astFF[19].Ovrd.Activate - | io: output * - $(PREFIX):FF:019:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[19].Ovrd.Activate - | io: output * - $(PREFIX):FF:019:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[19].Ovrd.Active - | io: input * - $(PREFIX):FF:019:Ovrd:Deactivate - bo - $(SYMBOL).astFF[19].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:019:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[19].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:019:Ovrd:Duration - longout - $(SYMBOL).astFF[19].Ovrd.Duration - | io: output * - $(PREFIX):FF:019:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[19].Ovrd.Duration - | io: output * - $(PREFIX):FF:019:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[19].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:019:Ovrd:Expiration - longout - $(SYMBOL).astFF[19].Ovrd.Expiration - | io: output * - $(PREFIX):FF:019:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[19].Ovrd.Expiration - | io: output * - $(PREFIX):FF:019:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[19].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:019:Ovrd:StartDT - longout - $(SYMBOL).astFF[19].Ovrd.StartDT - | io: output * - $(PREFIX):FF:019:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[19].Ovrd.StartDT - | io: output * - $(PREFIX):FF:019:Reset - bo - $(SYMBOL).astFF[19].Reset - | io: output * - $(PREFIX):FF:019:Reset_RBV - bi - $(SYMBOL).astFF[19].Reset - | io: output * - $(PREFIX):FF:020:BeamPermitted_RBV - bi - $(SYMBOL).astFF[20].BeamPermitted - | io: input * - $(PREFIX):FF:020:Info:Desc_RBV - waveform - $(SYMBOL).astFF[20].Info.Desc - | io: input * - $(PREFIX):FF:020:Info:DevName_RBV - waveform - $(SYMBOL).astFF[20].Info.DevName - | io: input * - $(PREFIX):FF:020:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[20].Info.InfoString - | io: input * - $(PREFIX):FF:020:Info:InUse_RBV - bi - $(SYMBOL).astFF[20].Info.InUse - | io: input * - $(PREFIX):FF:020:Info:Path_RBV - waveform - $(SYMBOL).astFF[20].Info.sPath - | io: input * - $(PREFIX):FF:020:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[20].Info.TypeCode - | io: input * - $(PREFIX):FF:020:OK_RBV - bi - $(SYMBOL).astFF[20].OK - | io: input * - $(PREFIX):FF:020:Ovrd:Activate - bo - $(SYMBOL).astFF[20].Ovrd.Activate - | io: output * - $(PREFIX):FF:020:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[20].Ovrd.Activate - | io: output * - $(PREFIX):FF:020:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[20].Ovrd.Active - | io: input * - $(PREFIX):FF:020:Ovrd:Deactivate - bo - $(SYMBOL).astFF[20].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:020:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[20].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:020:Ovrd:Duration - longout - $(SYMBOL).astFF[20].Ovrd.Duration - | io: output * - $(PREFIX):FF:020:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[20].Ovrd.Duration - | io: output * - $(PREFIX):FF:020:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[20].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:020:Ovrd:Expiration - longout - $(SYMBOL).astFF[20].Ovrd.Expiration - | io: output * - $(PREFIX):FF:020:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[20].Ovrd.Expiration - | io: output * - $(PREFIX):FF:020:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[20].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:020:Ovrd:StartDT - longout - $(SYMBOL).astFF[20].Ovrd.StartDT - | io: output * - $(PREFIX):FF:020:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[20].Ovrd.StartDT - | io: output * - $(PREFIX):FF:020:Reset - bo - $(SYMBOL).astFF[20].Reset - | io: output * - $(PREFIX):FF:020:Reset_RBV - bi - $(SYMBOL).astFF[20].Reset - | io: output * - $(PREFIX):FF:021:BeamPermitted_RBV - bi - $(SYMBOL).astFF[21].BeamPermitted - | io: input * - $(PREFIX):FF:021:Info:Desc_RBV - waveform - $(SYMBOL).astFF[21].Info.Desc - | io: input * - $(PREFIX):FF:021:Info:DevName_RBV - waveform - $(SYMBOL).astFF[21].Info.DevName - | io: input * - $(PREFIX):FF:021:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[21].Info.InfoString - | io: input * - $(PREFIX):FF:021:Info:InUse_RBV - bi - $(SYMBOL).astFF[21].Info.InUse - | io: input * - $(PREFIX):FF:021:Info:Path_RBV - waveform - $(SYMBOL).astFF[21].Info.sPath - | io: input * - $(PREFIX):FF:021:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[21].Info.TypeCode - | io: input * - $(PREFIX):FF:021:OK_RBV - bi - $(SYMBOL).astFF[21].OK - | io: input * - $(PREFIX):FF:021:Ovrd:Activate - bo - $(SYMBOL).astFF[21].Ovrd.Activate - | io: output * - $(PREFIX):FF:021:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[21].Ovrd.Activate - | io: output * - $(PREFIX):FF:021:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[21].Ovrd.Active - | io: input * - $(PREFIX):FF:021:Ovrd:Deactivate - bo - $(SYMBOL).astFF[21].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:021:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[21].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:021:Ovrd:Duration - longout - $(SYMBOL).astFF[21].Ovrd.Duration - | io: output * - $(PREFIX):FF:021:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[21].Ovrd.Duration - | io: output * - $(PREFIX):FF:021:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[21].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:021:Ovrd:Expiration - longout - $(SYMBOL).astFF[21].Ovrd.Expiration - | io: output * - $(PREFIX):FF:021:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[21].Ovrd.Expiration - | io: output * - $(PREFIX):FF:021:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[21].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:021:Ovrd:StartDT - longout - $(SYMBOL).astFF[21].Ovrd.StartDT - | io: output * - $(PREFIX):FF:021:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[21].Ovrd.StartDT - | io: output * - $(PREFIX):FF:021:Reset - bo - $(SYMBOL).astFF[21].Reset - | io: output * - $(PREFIX):FF:021:Reset_RBV - bi - $(SYMBOL).astFF[21].Reset - | io: output * - $(PREFIX):FF:022:BeamPermitted_RBV - bi - $(SYMBOL).astFF[22].BeamPermitted - | io: input * - $(PREFIX):FF:022:Info:Desc_RBV - waveform - $(SYMBOL).astFF[22].Info.Desc - | io: input * - $(PREFIX):FF:022:Info:DevName_RBV - waveform - $(SYMBOL).astFF[22].Info.DevName - | io: input * - $(PREFIX):FF:022:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[22].Info.InfoString - | io: input * - $(PREFIX):FF:022:Info:InUse_RBV - bi - $(SYMBOL).astFF[22].Info.InUse - | io: input * - $(PREFIX):FF:022:Info:Path_RBV - waveform - $(SYMBOL).astFF[22].Info.sPath - | io: input * - $(PREFIX):FF:022:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[22].Info.TypeCode - | io: input * - $(PREFIX):FF:022:OK_RBV - bi - $(SYMBOL).astFF[22].OK - | io: input * - $(PREFIX):FF:022:Ovrd:Activate - bo - $(SYMBOL).astFF[22].Ovrd.Activate - | io: output * - $(PREFIX):FF:022:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[22].Ovrd.Activate - | io: output * - $(PREFIX):FF:022:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[22].Ovrd.Active - | io: input * - $(PREFIX):FF:022:Ovrd:Deactivate - bo - $(SYMBOL).astFF[22].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:022:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[22].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:022:Ovrd:Duration - longout - $(SYMBOL).astFF[22].Ovrd.Duration - | io: output * - $(PREFIX):FF:022:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[22].Ovrd.Duration - | io: output * - $(PREFIX):FF:022:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[22].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:022:Ovrd:Expiration - longout - $(SYMBOL).astFF[22].Ovrd.Expiration - | io: output * - $(PREFIX):FF:022:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[22].Ovrd.Expiration - | io: output * - $(PREFIX):FF:022:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[22].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:022:Ovrd:StartDT - longout - $(SYMBOL).astFF[22].Ovrd.StartDT - | io: output * - $(PREFIX):FF:022:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[22].Ovrd.StartDT - | io: output * - $(PREFIX):FF:022:Reset - bo - $(SYMBOL).astFF[22].Reset - | io: output * - $(PREFIX):FF:022:Reset_RBV - bi - $(SYMBOL).astFF[22].Reset - | io: output * - $(PREFIX):FF:023:BeamPermitted_RBV - bi - $(SYMBOL).astFF[23].BeamPermitted - | io: input * - $(PREFIX):FF:023:Info:Desc_RBV - waveform - $(SYMBOL).astFF[23].Info.Desc - | io: input * - $(PREFIX):FF:023:Info:DevName_RBV - waveform - $(SYMBOL).astFF[23].Info.DevName - | io: input * - $(PREFIX):FF:023:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[23].Info.InfoString - | io: input * - $(PREFIX):FF:023:Info:InUse_RBV - bi - $(SYMBOL).astFF[23].Info.InUse - | io: input * - $(PREFIX):FF:023:Info:Path_RBV - waveform - $(SYMBOL).astFF[23].Info.sPath - | io: input * - $(PREFIX):FF:023:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[23].Info.TypeCode - | io: input * - $(PREFIX):FF:023:OK_RBV - bi - $(SYMBOL).astFF[23].OK - | io: input * - $(PREFIX):FF:023:Ovrd:Activate - bo - $(SYMBOL).astFF[23].Ovrd.Activate - | io: output * - $(PREFIX):FF:023:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[23].Ovrd.Activate - | io: output * - $(PREFIX):FF:023:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[23].Ovrd.Active - | io: input * - $(PREFIX):FF:023:Ovrd:Deactivate - bo - $(SYMBOL).astFF[23].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:023:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[23].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:023:Ovrd:Duration - longout - $(SYMBOL).astFF[23].Ovrd.Duration - | io: output * - $(PREFIX):FF:023:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[23].Ovrd.Duration - | io: output * - $(PREFIX):FF:023:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[23].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:023:Ovrd:Expiration - longout - $(SYMBOL).astFF[23].Ovrd.Expiration - | io: output * - $(PREFIX):FF:023:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[23].Ovrd.Expiration - | io: output * - $(PREFIX):FF:023:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[23].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:023:Ovrd:StartDT - longout - $(SYMBOL).astFF[23].Ovrd.StartDT - | io: output * - $(PREFIX):FF:023:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[23].Ovrd.StartDT - | io: output * - $(PREFIX):FF:023:Reset - bo - $(SYMBOL).astFF[23].Reset - | io: output * - $(PREFIX):FF:023:Reset_RBV - bi - $(SYMBOL).astFF[23].Reset - | io: output * - $(PREFIX):FF:024:BeamPermitted_RBV - bi - $(SYMBOL).astFF[24].BeamPermitted - | io: input * - $(PREFIX):FF:024:Info:Desc_RBV - waveform - $(SYMBOL).astFF[24].Info.Desc - | io: input * - $(PREFIX):FF:024:Info:DevName_RBV - waveform - $(SYMBOL).astFF[24].Info.DevName - | io: input * - $(PREFIX):FF:024:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[24].Info.InfoString - | io: input * - $(PREFIX):FF:024:Info:InUse_RBV - bi - $(SYMBOL).astFF[24].Info.InUse - | io: input * - $(PREFIX):FF:024:Info:Path_RBV - waveform - $(SYMBOL).astFF[24].Info.sPath - | io: input * - $(PREFIX):FF:024:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[24].Info.TypeCode - | io: input * - $(PREFIX):FF:024:OK_RBV - bi - $(SYMBOL).astFF[24].OK - | io: input * - $(PREFIX):FF:024:Ovrd:Activate - bo - $(SYMBOL).astFF[24].Ovrd.Activate - | io: output * - $(PREFIX):FF:024:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[24].Ovrd.Activate - | io: output * - $(PREFIX):FF:024:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[24].Ovrd.Active - | io: input * - $(PREFIX):FF:024:Ovrd:Deactivate - bo - $(SYMBOL).astFF[24].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:024:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[24].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:024:Ovrd:Duration - longout - $(SYMBOL).astFF[24].Ovrd.Duration - | io: output * - $(PREFIX):FF:024:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[24].Ovrd.Duration - | io: output * - $(PREFIX):FF:024:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[24].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:024:Ovrd:Expiration - longout - $(SYMBOL).astFF[24].Ovrd.Expiration - | io: output * - $(PREFIX):FF:024:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[24].Ovrd.Expiration - | io: output * - $(PREFIX):FF:024:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[24].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:024:Ovrd:StartDT - longout - $(SYMBOL).astFF[24].Ovrd.StartDT - | io: output * - $(PREFIX):FF:024:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[24].Ovrd.StartDT - | io: output * - $(PREFIX):FF:024:Reset - bo - $(SYMBOL).astFF[24].Reset - | io: output * - $(PREFIX):FF:024:Reset_RBV - bi - $(SYMBOL).astFF[24].Reset - | io: output * - $(PREFIX):FF:025:BeamPermitted_RBV - bi - $(SYMBOL).astFF[25].BeamPermitted - | io: input * - $(PREFIX):FF:025:Info:Desc_RBV - waveform - $(SYMBOL).astFF[25].Info.Desc - | io: input * - $(PREFIX):FF:025:Info:DevName_RBV - waveform - $(SYMBOL).astFF[25].Info.DevName - | io: input * - $(PREFIX):FF:025:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[25].Info.InfoString - | io: input * - $(PREFIX):FF:025:Info:InUse_RBV - bi - $(SYMBOL).astFF[25].Info.InUse - | io: input * - $(PREFIX):FF:025:Info:Path_RBV - waveform - $(SYMBOL).astFF[25].Info.sPath - | io: input * - $(PREFIX):FF:025:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[25].Info.TypeCode - | io: input * - $(PREFIX):FF:025:OK_RBV - bi - $(SYMBOL).astFF[25].OK - | io: input * - $(PREFIX):FF:025:Ovrd:Activate - bo - $(SYMBOL).astFF[25].Ovrd.Activate - | io: output * - $(PREFIX):FF:025:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[25].Ovrd.Activate - | io: output * - $(PREFIX):FF:025:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[25].Ovrd.Active - | io: input * - $(PREFIX):FF:025:Ovrd:Deactivate - bo - $(SYMBOL).astFF[25].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:025:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[25].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:025:Ovrd:Duration - longout - $(SYMBOL).astFF[25].Ovrd.Duration - | io: output * - $(PREFIX):FF:025:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[25].Ovrd.Duration - | io: output * - $(PREFIX):FF:025:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[25].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:025:Ovrd:Expiration - longout - $(SYMBOL).astFF[25].Ovrd.Expiration - | io: output * - $(PREFIX):FF:025:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[25].Ovrd.Expiration - | io: output * - $(PREFIX):FF:025:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[25].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:025:Ovrd:StartDT - longout - $(SYMBOL).astFF[25].Ovrd.StartDT - | io: output * - $(PREFIX):FF:025:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[25].Ovrd.StartDT - | io: output * - $(PREFIX):FF:025:Reset - bo - $(SYMBOL).astFF[25].Reset - | io: output * - $(PREFIX):FF:025:Reset_RBV - bi - $(SYMBOL).astFF[25].Reset - | io: output * - $(PREFIX):FF:026:BeamPermitted_RBV - bi - $(SYMBOL).astFF[26].BeamPermitted - | io: input * - $(PREFIX):FF:026:Info:Desc_RBV - waveform - $(SYMBOL).astFF[26].Info.Desc - | io: input * - $(PREFIX):FF:026:Info:DevName_RBV - waveform - $(SYMBOL).astFF[26].Info.DevName - | io: input * - $(PREFIX):FF:026:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[26].Info.InfoString - | io: input * - $(PREFIX):FF:026:Info:InUse_RBV - bi - $(SYMBOL).astFF[26].Info.InUse - | io: input * - $(PREFIX):FF:026:Info:Path_RBV - waveform - $(SYMBOL).astFF[26].Info.sPath - | io: input * - $(PREFIX):FF:026:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[26].Info.TypeCode - | io: input * - $(PREFIX):FF:026:OK_RBV - bi - $(SYMBOL).astFF[26].OK - | io: input * - $(PREFIX):FF:026:Ovrd:Activate - bo - $(SYMBOL).astFF[26].Ovrd.Activate - | io: output * - $(PREFIX):FF:026:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[26].Ovrd.Activate - | io: output * - $(PREFIX):FF:026:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[26].Ovrd.Active - | io: input * - $(PREFIX):FF:026:Ovrd:Deactivate - bo - $(SYMBOL).astFF[26].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:026:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[26].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:026:Ovrd:Duration - longout - $(SYMBOL).astFF[26].Ovrd.Duration - | io: output * - $(PREFIX):FF:026:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[26].Ovrd.Duration - | io: output * - $(PREFIX):FF:026:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[26].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:026:Ovrd:Expiration - longout - $(SYMBOL).astFF[26].Ovrd.Expiration - | io: output * - $(PREFIX):FF:026:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[26].Ovrd.Expiration - | io: output * - $(PREFIX):FF:026:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[26].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:026:Ovrd:StartDT - longout - $(SYMBOL).astFF[26].Ovrd.StartDT - | io: output * - $(PREFIX):FF:026:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[26].Ovrd.StartDT - | io: output * - $(PREFIX):FF:026:Reset - bo - $(SYMBOL).astFF[26].Reset - | io: output * - $(PREFIX):FF:026:Reset_RBV - bi - $(SYMBOL).astFF[26].Reset - | io: output * - $(PREFIX):FF:027:BeamPermitted_RBV - bi - $(SYMBOL).astFF[27].BeamPermitted - | io: input * - $(PREFIX):FF:027:Info:Desc_RBV - waveform - $(SYMBOL).astFF[27].Info.Desc - | io: input * - $(PREFIX):FF:027:Info:DevName_RBV - waveform - $(SYMBOL).astFF[27].Info.DevName - | io: input * - $(PREFIX):FF:027:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[27].Info.InfoString - | io: input * - $(PREFIX):FF:027:Info:InUse_RBV - bi - $(SYMBOL).astFF[27].Info.InUse - | io: input * - $(PREFIX):FF:027:Info:Path_RBV - waveform - $(SYMBOL).astFF[27].Info.sPath - | io: input * - $(PREFIX):FF:027:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[27].Info.TypeCode - | io: input * - $(PREFIX):FF:027:OK_RBV - bi - $(SYMBOL).astFF[27].OK - | io: input * - $(PREFIX):FF:027:Ovrd:Activate - bo - $(SYMBOL).astFF[27].Ovrd.Activate - | io: output * - $(PREFIX):FF:027:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[27].Ovrd.Activate - | io: output * - $(PREFIX):FF:027:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[27].Ovrd.Active - | io: input * - $(PREFIX):FF:027:Ovrd:Deactivate - bo - $(SYMBOL).astFF[27].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:027:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[27].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:027:Ovrd:Duration - longout - $(SYMBOL).astFF[27].Ovrd.Duration - | io: output * - $(PREFIX):FF:027:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[27].Ovrd.Duration - | io: output * - $(PREFIX):FF:027:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[27].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:027:Ovrd:Expiration - longout - $(SYMBOL).astFF[27].Ovrd.Expiration - | io: output * - $(PREFIX):FF:027:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[27].Ovrd.Expiration - | io: output * - $(PREFIX):FF:027:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[27].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:027:Ovrd:StartDT - longout - $(SYMBOL).astFF[27].Ovrd.StartDT - | io: output * - $(PREFIX):FF:027:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[27].Ovrd.StartDT - | io: output * - $(PREFIX):FF:027:Reset - bo - $(SYMBOL).astFF[27].Reset - | io: output * - $(PREFIX):FF:027:Reset_RBV - bi - $(SYMBOL).astFF[27].Reset - | io: output * - $(PREFIX):FF:028:BeamPermitted_RBV - bi - $(SYMBOL).astFF[28].BeamPermitted - | io: input * - $(PREFIX):FF:028:Info:Desc_RBV - waveform - $(SYMBOL).astFF[28].Info.Desc - | io: input * - $(PREFIX):FF:028:Info:DevName_RBV - waveform - $(SYMBOL).astFF[28].Info.DevName - | io: input * - $(PREFIX):FF:028:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[28].Info.InfoString - | io: input * - $(PREFIX):FF:028:Info:InUse_RBV - bi - $(SYMBOL).astFF[28].Info.InUse - | io: input * - $(PREFIX):FF:028:Info:Path_RBV - waveform - $(SYMBOL).astFF[28].Info.sPath - | io: input * - $(PREFIX):FF:028:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[28].Info.TypeCode - | io: input * - $(PREFIX):FF:028:OK_RBV - bi - $(SYMBOL).astFF[28].OK - | io: input * - $(PREFIX):FF:028:Ovrd:Activate - bo - $(SYMBOL).astFF[28].Ovrd.Activate - | io: output * - $(PREFIX):FF:028:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[28].Ovrd.Activate - | io: output * - $(PREFIX):FF:028:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[28].Ovrd.Active - | io: input * - $(PREFIX):FF:028:Ovrd:Deactivate - bo - $(SYMBOL).astFF[28].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:028:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[28].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:028:Ovrd:Duration - longout - $(SYMBOL).astFF[28].Ovrd.Duration - | io: output * - $(PREFIX):FF:028:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[28].Ovrd.Duration - | io: output * - $(PREFIX):FF:028:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[28].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:028:Ovrd:Expiration - longout - $(SYMBOL).astFF[28].Ovrd.Expiration - | io: output * - $(PREFIX):FF:028:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[28].Ovrd.Expiration - | io: output * - $(PREFIX):FF:028:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[28].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:028:Ovrd:StartDT - longout - $(SYMBOL).astFF[28].Ovrd.StartDT - | io: output * - $(PREFIX):FF:028:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[28].Ovrd.StartDT - | io: output * - $(PREFIX):FF:028:Reset - bo - $(SYMBOL).astFF[28].Reset - | io: output * - $(PREFIX):FF:028:Reset_RBV - bi - $(SYMBOL).astFF[28].Reset - | io: output * - $(PREFIX):FF:029:BeamPermitted_RBV - bi - $(SYMBOL).astFF[29].BeamPermitted - | io: input * - $(PREFIX):FF:029:Info:Desc_RBV - waveform - $(SYMBOL).astFF[29].Info.Desc - | io: input * - $(PREFIX):FF:029:Info:DevName_RBV - waveform - $(SYMBOL).astFF[29].Info.DevName - | io: input * - $(PREFIX):FF:029:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[29].Info.InfoString - | io: input * - $(PREFIX):FF:029:Info:InUse_RBV - bi - $(SYMBOL).astFF[29].Info.InUse - | io: input * - $(PREFIX):FF:029:Info:Path_RBV - waveform - $(SYMBOL).astFF[29].Info.sPath - | io: input * - $(PREFIX):FF:029:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[29].Info.TypeCode - | io: input * - $(PREFIX):FF:029:OK_RBV - bi - $(SYMBOL).astFF[29].OK - | io: input * - $(PREFIX):FF:029:Ovrd:Activate - bo - $(SYMBOL).astFF[29].Ovrd.Activate - | io: output * - $(PREFIX):FF:029:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[29].Ovrd.Activate - | io: output * - $(PREFIX):FF:029:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[29].Ovrd.Active - | io: input * - $(PREFIX):FF:029:Ovrd:Deactivate - bo - $(SYMBOL).astFF[29].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:029:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[29].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:029:Ovrd:Duration - longout - $(SYMBOL).astFF[29].Ovrd.Duration - | io: output * - $(PREFIX):FF:029:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[29].Ovrd.Duration - | io: output * - $(PREFIX):FF:029:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[29].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:029:Ovrd:Expiration - longout - $(SYMBOL).astFF[29].Ovrd.Expiration - | io: output * - $(PREFIX):FF:029:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[29].Ovrd.Expiration - | io: output * - $(PREFIX):FF:029:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[29].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:029:Ovrd:StartDT - longout - $(SYMBOL).astFF[29].Ovrd.StartDT - | io: output * - $(PREFIX):FF:029:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[29].Ovrd.StartDT - | io: output * - $(PREFIX):FF:029:Reset - bo - $(SYMBOL).astFF[29].Reset - | io: output * - $(PREFIX):FF:029:Reset_RBV - bi - $(SYMBOL).astFF[29].Reset - | io: output * - $(PREFIX):FF:030:BeamPermitted_RBV - bi - $(SYMBOL).astFF[30].BeamPermitted - | io: input * - $(PREFIX):FF:030:Info:Desc_RBV - waveform - $(SYMBOL).astFF[30].Info.Desc - | io: input * - $(PREFIX):FF:030:Info:DevName_RBV - waveform - $(SYMBOL).astFF[30].Info.DevName - | io: input * - $(PREFIX):FF:030:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[30].Info.InfoString - | io: input * - $(PREFIX):FF:030:Info:InUse_RBV - bi - $(SYMBOL).astFF[30].Info.InUse - | io: input * - $(PREFIX):FF:030:Info:Path_RBV - waveform - $(SYMBOL).astFF[30].Info.sPath - | io: input * - $(PREFIX):FF:030:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[30].Info.TypeCode - | io: input * - $(PREFIX):FF:030:OK_RBV - bi - $(SYMBOL).astFF[30].OK - | io: input * - $(PREFIX):FF:030:Ovrd:Activate - bo - $(SYMBOL).astFF[30].Ovrd.Activate - | io: output * - $(PREFIX):FF:030:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[30].Ovrd.Activate - | io: output * - $(PREFIX):FF:030:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[30].Ovrd.Active - | io: input * - $(PREFIX):FF:030:Ovrd:Deactivate - bo - $(SYMBOL).astFF[30].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:030:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[30].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:030:Ovrd:Duration - longout - $(SYMBOL).astFF[30].Ovrd.Duration - | io: output * - $(PREFIX):FF:030:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[30].Ovrd.Duration - | io: output * - $(PREFIX):FF:030:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[30].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:030:Ovrd:Expiration - longout - $(SYMBOL).astFF[30].Ovrd.Expiration - | io: output * - $(PREFIX):FF:030:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[30].Ovrd.Expiration - | io: output * - $(PREFIX):FF:030:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[30].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:030:Ovrd:StartDT - longout - $(SYMBOL).astFF[30].Ovrd.StartDT - | io: output * - $(PREFIX):FF:030:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[30].Ovrd.StartDT - | io: output * - $(PREFIX):FF:030:Reset - bo - $(SYMBOL).astFF[30].Reset - | io: output * - $(PREFIX):FF:030:Reset_RBV - bi - $(SYMBOL).astFF[30].Reset - | io: output * - $(PREFIX):FF:031:BeamPermitted_RBV - bi - $(SYMBOL).astFF[31].BeamPermitted - | io: input * - $(PREFIX):FF:031:Info:Desc_RBV - waveform - $(SYMBOL).astFF[31].Info.Desc - | io: input * - $(PREFIX):FF:031:Info:DevName_RBV - waveform - $(SYMBOL).astFF[31].Info.DevName - | io: input * - $(PREFIX):FF:031:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[31].Info.InfoString - | io: input * - $(PREFIX):FF:031:Info:InUse_RBV - bi - $(SYMBOL).astFF[31].Info.InUse - | io: input * - $(PREFIX):FF:031:Info:Path_RBV - waveform - $(SYMBOL).astFF[31].Info.sPath - | io: input * - $(PREFIX):FF:031:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[31].Info.TypeCode - | io: input * - $(PREFIX):FF:031:OK_RBV - bi - $(SYMBOL).astFF[31].OK - | io: input * - $(PREFIX):FF:031:Ovrd:Activate - bo - $(SYMBOL).astFF[31].Ovrd.Activate - | io: output * - $(PREFIX):FF:031:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[31].Ovrd.Activate - | io: output * - $(PREFIX):FF:031:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[31].Ovrd.Active - | io: input * - $(PREFIX):FF:031:Ovrd:Deactivate - bo - $(SYMBOL).astFF[31].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:031:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[31].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:031:Ovrd:Duration - longout - $(SYMBOL).astFF[31].Ovrd.Duration - | io: output * - $(PREFIX):FF:031:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[31].Ovrd.Duration - | io: output * - $(PREFIX):FF:031:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[31].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:031:Ovrd:Expiration - longout - $(SYMBOL).astFF[31].Ovrd.Expiration - | io: output * - $(PREFIX):FF:031:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[31].Ovrd.Expiration - | io: output * - $(PREFIX):FF:031:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[31].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:031:Ovrd:StartDT - longout - $(SYMBOL).astFF[31].Ovrd.StartDT - | io: output * - $(PREFIX):FF:031:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[31].Ovrd.StartDT - | io: output * - $(PREFIX):FF:031:Reset - bo - $(SYMBOL).astFF[31].Reset - | io: output * - $(PREFIX):FF:031:Reset_RBV - bi - $(SYMBOL).astFF[31].Reset - | io: output * - $(PREFIX):FF:032:BeamPermitted_RBV - bi - $(SYMBOL).astFF[32].BeamPermitted - | io: input * - $(PREFIX):FF:032:Info:Desc_RBV - waveform - $(SYMBOL).astFF[32].Info.Desc - | io: input * - $(PREFIX):FF:032:Info:DevName_RBV - waveform - $(SYMBOL).astFF[32].Info.DevName - | io: input * - $(PREFIX):FF:032:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[32].Info.InfoString - | io: input * - $(PREFIX):FF:032:Info:InUse_RBV - bi - $(SYMBOL).astFF[32].Info.InUse - | io: input * - $(PREFIX):FF:032:Info:Path_RBV - waveform - $(SYMBOL).astFF[32].Info.sPath - | io: input * - $(PREFIX):FF:032:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[32].Info.TypeCode - | io: input * - $(PREFIX):FF:032:OK_RBV - bi - $(SYMBOL).astFF[32].OK - | io: input * - $(PREFIX):FF:032:Ovrd:Activate - bo - $(SYMBOL).astFF[32].Ovrd.Activate - | io: output * - $(PREFIX):FF:032:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[32].Ovrd.Activate - | io: output * - $(PREFIX):FF:032:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[32].Ovrd.Active - | io: input * - $(PREFIX):FF:032:Ovrd:Deactivate - bo - $(SYMBOL).astFF[32].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:032:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[32].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:032:Ovrd:Duration - longout - $(SYMBOL).astFF[32].Ovrd.Duration - | io: output * - $(PREFIX):FF:032:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[32].Ovrd.Duration - | io: output * - $(PREFIX):FF:032:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[32].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:032:Ovrd:Expiration - longout - $(SYMBOL).astFF[32].Ovrd.Expiration - | io: output * - $(PREFIX):FF:032:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[32].Ovrd.Expiration - | io: output * - $(PREFIX):FF:032:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[32].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:032:Ovrd:StartDT - longout - $(SYMBOL).astFF[32].Ovrd.StartDT - | io: output * - $(PREFIX):FF:032:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[32].Ovrd.StartDT - | io: output * - $(PREFIX):FF:032:Reset - bo - $(SYMBOL).astFF[32].Reset - | io: output * - $(PREFIX):FF:032:Reset_RBV - bi - $(SYMBOL).astFF[32].Reset - | io: output * - $(PREFIX):FF:033:BeamPermitted_RBV - bi - $(SYMBOL).astFF[33].BeamPermitted - | io: input * - $(PREFIX):FF:033:Info:Desc_RBV - waveform - $(SYMBOL).astFF[33].Info.Desc - | io: input * - $(PREFIX):FF:033:Info:DevName_RBV - waveform - $(SYMBOL).astFF[33].Info.DevName - | io: input * - $(PREFIX):FF:033:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[33].Info.InfoString - | io: input * - $(PREFIX):FF:033:Info:InUse_RBV - bi - $(SYMBOL).astFF[33].Info.InUse - | io: input * - $(PREFIX):FF:033:Info:Path_RBV - waveform - $(SYMBOL).astFF[33].Info.sPath - | io: input * - $(PREFIX):FF:033:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[33].Info.TypeCode - | io: input * - $(PREFIX):FF:033:OK_RBV - bi - $(SYMBOL).astFF[33].OK - | io: input * - $(PREFIX):FF:033:Ovrd:Activate - bo - $(SYMBOL).astFF[33].Ovrd.Activate - | io: output * - $(PREFIX):FF:033:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[33].Ovrd.Activate - | io: output * - $(PREFIX):FF:033:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[33].Ovrd.Active - | io: input * - $(PREFIX):FF:033:Ovrd:Deactivate - bo - $(SYMBOL).astFF[33].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:033:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[33].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:033:Ovrd:Duration - longout - $(SYMBOL).astFF[33].Ovrd.Duration - | io: output * - $(PREFIX):FF:033:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[33].Ovrd.Duration - | io: output * - $(PREFIX):FF:033:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[33].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:033:Ovrd:Expiration - longout - $(SYMBOL).astFF[33].Ovrd.Expiration - | io: output * - $(PREFIX):FF:033:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[33].Ovrd.Expiration - | io: output * - $(PREFIX):FF:033:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[33].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:033:Ovrd:StartDT - longout - $(SYMBOL).astFF[33].Ovrd.StartDT - | io: output * - $(PREFIX):FF:033:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[33].Ovrd.StartDT - | io: output * - $(PREFIX):FF:033:Reset - bo - $(SYMBOL).astFF[33].Reset - | io: output * - $(PREFIX):FF:033:Reset_RBV - bi - $(SYMBOL).astFF[33].Reset - | io: output * - $(PREFIX):FF:034:BeamPermitted_RBV - bi - $(SYMBOL).astFF[34].BeamPermitted - | io: input * - $(PREFIX):FF:034:Info:Desc_RBV - waveform - $(SYMBOL).astFF[34].Info.Desc - | io: input * - $(PREFIX):FF:034:Info:DevName_RBV - waveform - $(SYMBOL).astFF[34].Info.DevName - | io: input * - $(PREFIX):FF:034:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[34].Info.InfoString - | io: input * - $(PREFIX):FF:034:Info:InUse_RBV - bi - $(SYMBOL).astFF[34].Info.InUse - | io: input * - $(PREFIX):FF:034:Info:Path_RBV - waveform - $(SYMBOL).astFF[34].Info.sPath - | io: input * - $(PREFIX):FF:034:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[34].Info.TypeCode - | io: input * - $(PREFIX):FF:034:OK_RBV - bi - $(SYMBOL).astFF[34].OK - | io: input * - $(PREFIX):FF:034:Ovrd:Activate - bo - $(SYMBOL).astFF[34].Ovrd.Activate - | io: output * - $(PREFIX):FF:034:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[34].Ovrd.Activate - | io: output * - $(PREFIX):FF:034:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[34].Ovrd.Active - | io: input * - $(PREFIX):FF:034:Ovrd:Deactivate - bo - $(SYMBOL).astFF[34].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:034:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[34].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:034:Ovrd:Duration - longout - $(SYMBOL).astFF[34].Ovrd.Duration - | io: output * - $(PREFIX):FF:034:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[34].Ovrd.Duration - | io: output * - $(PREFIX):FF:034:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[34].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:034:Ovrd:Expiration - longout - $(SYMBOL).astFF[34].Ovrd.Expiration - | io: output * - $(PREFIX):FF:034:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[34].Ovrd.Expiration - | io: output * - $(PREFIX):FF:034:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[34].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:034:Ovrd:StartDT - longout - $(SYMBOL).astFF[34].Ovrd.StartDT - | io: output * - $(PREFIX):FF:034:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[34].Ovrd.StartDT - | io: output * - $(PREFIX):FF:034:Reset - bo - $(SYMBOL).astFF[34].Reset - | io: output * - $(PREFIX):FF:034:Reset_RBV - bi - $(SYMBOL).astFF[34].Reset - | io: output * - $(PREFIX):FF:035:BeamPermitted_RBV - bi - $(SYMBOL).astFF[35].BeamPermitted - | io: input * - $(PREFIX):FF:035:Info:Desc_RBV - waveform - $(SYMBOL).astFF[35].Info.Desc - | io: input * - $(PREFIX):FF:035:Info:DevName_RBV - waveform - $(SYMBOL).astFF[35].Info.DevName - | io: input * - $(PREFIX):FF:035:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[35].Info.InfoString - | io: input * - $(PREFIX):FF:035:Info:InUse_RBV - bi - $(SYMBOL).astFF[35].Info.InUse - | io: input * - $(PREFIX):FF:035:Info:Path_RBV - waveform - $(SYMBOL).astFF[35].Info.sPath - | io: input * - $(PREFIX):FF:035:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[35].Info.TypeCode - | io: input * - $(PREFIX):FF:035:OK_RBV - bi - $(SYMBOL).astFF[35].OK - | io: input * - $(PREFIX):FF:035:Ovrd:Activate - bo - $(SYMBOL).astFF[35].Ovrd.Activate - | io: output * - $(PREFIX):FF:035:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[35].Ovrd.Activate - | io: output * - $(PREFIX):FF:035:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[35].Ovrd.Active - | io: input * - $(PREFIX):FF:035:Ovrd:Deactivate - bo - $(SYMBOL).astFF[35].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:035:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[35].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:035:Ovrd:Duration - longout - $(SYMBOL).astFF[35].Ovrd.Duration - | io: output * - $(PREFIX):FF:035:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[35].Ovrd.Duration - | io: output * - $(PREFIX):FF:035:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[35].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:035:Ovrd:Expiration - longout - $(SYMBOL).astFF[35].Ovrd.Expiration - | io: output * - $(PREFIX):FF:035:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[35].Ovrd.Expiration - | io: output * - $(PREFIX):FF:035:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[35].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:035:Ovrd:StartDT - longout - $(SYMBOL).astFF[35].Ovrd.StartDT - | io: output * - $(PREFIX):FF:035:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[35].Ovrd.StartDT - | io: output * - $(PREFIX):FF:035:Reset - bo - $(SYMBOL).astFF[35].Reset - | io: output * - $(PREFIX):FF:035:Reset_RBV - bi - $(SYMBOL).astFF[35].Reset - | io: output * - $(PREFIX):FF:036:BeamPermitted_RBV - bi - $(SYMBOL).astFF[36].BeamPermitted - | io: input * - $(PREFIX):FF:036:Info:Desc_RBV - waveform - $(SYMBOL).astFF[36].Info.Desc - | io: input * - $(PREFIX):FF:036:Info:DevName_RBV - waveform - $(SYMBOL).astFF[36].Info.DevName - | io: input * - $(PREFIX):FF:036:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[36].Info.InfoString - | io: input * - $(PREFIX):FF:036:Info:InUse_RBV - bi - $(SYMBOL).astFF[36].Info.InUse - | io: input * - $(PREFIX):FF:036:Info:Path_RBV - waveform - $(SYMBOL).astFF[36].Info.sPath - | io: input * - $(PREFIX):FF:036:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[36].Info.TypeCode - | io: input * - $(PREFIX):FF:036:OK_RBV - bi - $(SYMBOL).astFF[36].OK - | io: input * - $(PREFIX):FF:036:Ovrd:Activate - bo - $(SYMBOL).astFF[36].Ovrd.Activate - | io: output * - $(PREFIX):FF:036:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[36].Ovrd.Activate - | io: output * - $(PREFIX):FF:036:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[36].Ovrd.Active - | io: input * - $(PREFIX):FF:036:Ovrd:Deactivate - bo - $(SYMBOL).astFF[36].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:036:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[36].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:036:Ovrd:Duration - longout - $(SYMBOL).astFF[36].Ovrd.Duration - | io: output * - $(PREFIX):FF:036:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[36].Ovrd.Duration - | io: output * - $(PREFIX):FF:036:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[36].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:036:Ovrd:Expiration - longout - $(SYMBOL).astFF[36].Ovrd.Expiration - | io: output * - $(PREFIX):FF:036:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[36].Ovrd.Expiration - | io: output * - $(PREFIX):FF:036:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[36].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:036:Ovrd:StartDT - longout - $(SYMBOL).astFF[36].Ovrd.StartDT - | io: output * - $(PREFIX):FF:036:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[36].Ovrd.StartDT - | io: output * - $(PREFIX):FF:036:Reset - bo - $(SYMBOL).astFF[36].Reset - | io: output * - $(PREFIX):FF:036:Reset_RBV - bi - $(SYMBOL).astFF[36].Reset - | io: output * - $(PREFIX):FF:037:BeamPermitted_RBV - bi - $(SYMBOL).astFF[37].BeamPermitted - | io: input * - $(PREFIX):FF:037:Info:Desc_RBV - waveform - $(SYMBOL).astFF[37].Info.Desc - | io: input * - $(PREFIX):FF:037:Info:DevName_RBV - waveform - $(SYMBOL).astFF[37].Info.DevName - | io: input * - $(PREFIX):FF:037:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[37].Info.InfoString - | io: input * - $(PREFIX):FF:037:Info:InUse_RBV - bi - $(SYMBOL).astFF[37].Info.InUse - | io: input * - $(PREFIX):FF:037:Info:Path_RBV - waveform - $(SYMBOL).astFF[37].Info.sPath - | io: input * - $(PREFIX):FF:037:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[37].Info.TypeCode - | io: input * - $(PREFIX):FF:037:OK_RBV - bi - $(SYMBOL).astFF[37].OK - | io: input * - $(PREFIX):FF:037:Ovrd:Activate - bo - $(SYMBOL).astFF[37].Ovrd.Activate - | io: output * - $(PREFIX):FF:037:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[37].Ovrd.Activate - | io: output * - $(PREFIX):FF:037:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[37].Ovrd.Active - | io: input * - $(PREFIX):FF:037:Ovrd:Deactivate - bo - $(SYMBOL).astFF[37].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:037:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[37].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:037:Ovrd:Duration - longout - $(SYMBOL).astFF[37].Ovrd.Duration - | io: output * - $(PREFIX):FF:037:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[37].Ovrd.Duration - | io: output * - $(PREFIX):FF:037:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[37].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:037:Ovrd:Expiration - longout - $(SYMBOL).astFF[37].Ovrd.Expiration - | io: output * - $(PREFIX):FF:037:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[37].Ovrd.Expiration - | io: output * - $(PREFIX):FF:037:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[37].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:037:Ovrd:StartDT - longout - $(SYMBOL).astFF[37].Ovrd.StartDT - | io: output * - $(PREFIX):FF:037:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[37].Ovrd.StartDT - | io: output * - $(PREFIX):FF:037:Reset - bo - $(SYMBOL).astFF[37].Reset - | io: output * - $(PREFIX):FF:037:Reset_RBV - bi - $(SYMBOL).astFF[37].Reset - | io: output * - $(PREFIX):FF:038:BeamPermitted_RBV - bi - $(SYMBOL).astFF[38].BeamPermitted - | io: input * - $(PREFIX):FF:038:Info:Desc_RBV - waveform - $(SYMBOL).astFF[38].Info.Desc - | io: input * - $(PREFIX):FF:038:Info:DevName_RBV - waveform - $(SYMBOL).astFF[38].Info.DevName - | io: input * - $(PREFIX):FF:038:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[38].Info.InfoString - | io: input * - $(PREFIX):FF:038:Info:InUse_RBV - bi - $(SYMBOL).astFF[38].Info.InUse - | io: input * - $(PREFIX):FF:038:Info:Path_RBV - waveform - $(SYMBOL).astFF[38].Info.sPath - | io: input * - $(PREFIX):FF:038:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[38].Info.TypeCode - | io: input * - $(PREFIX):FF:038:OK_RBV - bi - $(SYMBOL).astFF[38].OK - | io: input * - $(PREFIX):FF:038:Ovrd:Activate - bo - $(SYMBOL).astFF[38].Ovrd.Activate - | io: output * - $(PREFIX):FF:038:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[38].Ovrd.Activate - | io: output * - $(PREFIX):FF:038:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[38].Ovrd.Active - | io: input * - $(PREFIX):FF:038:Ovrd:Deactivate - bo - $(SYMBOL).astFF[38].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:038:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[38].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:038:Ovrd:Duration - longout - $(SYMBOL).astFF[38].Ovrd.Duration - | io: output * - $(PREFIX):FF:038:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[38].Ovrd.Duration - | io: output * - $(PREFIX):FF:038:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[38].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:038:Ovrd:Expiration - longout - $(SYMBOL).astFF[38].Ovrd.Expiration - | io: output * - $(PREFIX):FF:038:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[38].Ovrd.Expiration - | io: output * - $(PREFIX):FF:038:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[38].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:038:Ovrd:StartDT - longout - $(SYMBOL).astFF[38].Ovrd.StartDT - | io: output * - $(PREFIX):FF:038:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[38].Ovrd.StartDT - | io: output * - $(PREFIX):FF:038:Reset - bo - $(SYMBOL).astFF[38].Reset - | io: output * - $(PREFIX):FF:038:Reset_RBV - bi - $(SYMBOL).astFF[38].Reset - | io: output * - $(PREFIX):FF:039:BeamPermitted_RBV - bi - $(SYMBOL).astFF[39].BeamPermitted - | io: input * - $(PREFIX):FF:039:Info:Desc_RBV - waveform - $(SYMBOL).astFF[39].Info.Desc - | io: input * - $(PREFIX):FF:039:Info:DevName_RBV - waveform - $(SYMBOL).astFF[39].Info.DevName - | io: input * - $(PREFIX):FF:039:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[39].Info.InfoString - | io: input * - $(PREFIX):FF:039:Info:InUse_RBV - bi - $(SYMBOL).astFF[39].Info.InUse - | io: input * - $(PREFIX):FF:039:Info:Path_RBV - waveform - $(SYMBOL).astFF[39].Info.sPath - | io: input * - $(PREFIX):FF:039:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[39].Info.TypeCode - | io: input * - $(PREFIX):FF:039:OK_RBV - bi - $(SYMBOL).astFF[39].OK - | io: input * - $(PREFIX):FF:039:Ovrd:Activate - bo - $(SYMBOL).astFF[39].Ovrd.Activate - | io: output * - $(PREFIX):FF:039:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[39].Ovrd.Activate - | io: output * - $(PREFIX):FF:039:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[39].Ovrd.Active - | io: input * - $(PREFIX):FF:039:Ovrd:Deactivate - bo - $(SYMBOL).astFF[39].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:039:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[39].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:039:Ovrd:Duration - longout - $(SYMBOL).astFF[39].Ovrd.Duration - | io: output * - $(PREFIX):FF:039:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[39].Ovrd.Duration - | io: output * - $(PREFIX):FF:039:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[39].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:039:Ovrd:Expiration - longout - $(SYMBOL).astFF[39].Ovrd.Expiration - | io: output * - $(PREFIX):FF:039:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[39].Ovrd.Expiration - | io: output * - $(PREFIX):FF:039:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[39].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:039:Ovrd:StartDT - longout - $(SYMBOL).astFF[39].Ovrd.StartDT - | io: output * - $(PREFIX):FF:039:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[39].Ovrd.StartDT - | io: output * - $(PREFIX):FF:039:Reset - bo - $(SYMBOL).astFF[39].Reset - | io: output * - $(PREFIX):FF:039:Reset_RBV - bi - $(SYMBOL).astFF[39].Reset - | io: output * - $(PREFIX):FF:040:BeamPermitted_RBV - bi - $(SYMBOL).astFF[40].BeamPermitted - | io: input * - $(PREFIX):FF:040:Info:Desc_RBV - waveform - $(SYMBOL).astFF[40].Info.Desc - | io: input * - $(PREFIX):FF:040:Info:DevName_RBV - waveform - $(SYMBOL).astFF[40].Info.DevName - | io: input * - $(PREFIX):FF:040:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[40].Info.InfoString - | io: input * - $(PREFIX):FF:040:Info:InUse_RBV - bi - $(SYMBOL).astFF[40].Info.InUse - | io: input * - $(PREFIX):FF:040:Info:Path_RBV - waveform - $(SYMBOL).astFF[40].Info.sPath - | io: input * - $(PREFIX):FF:040:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[40].Info.TypeCode - | io: input * - $(PREFIX):FF:040:OK_RBV - bi - $(SYMBOL).astFF[40].OK - | io: input * - $(PREFIX):FF:040:Ovrd:Activate - bo - $(SYMBOL).astFF[40].Ovrd.Activate - | io: output * - $(PREFIX):FF:040:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[40].Ovrd.Activate - | io: output * - $(PREFIX):FF:040:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[40].Ovrd.Active - | io: input * - $(PREFIX):FF:040:Ovrd:Deactivate - bo - $(SYMBOL).astFF[40].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:040:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[40].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:040:Ovrd:Duration - longout - $(SYMBOL).astFF[40].Ovrd.Duration - | io: output * - $(PREFIX):FF:040:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[40].Ovrd.Duration - | io: output * - $(PREFIX):FF:040:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[40].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:040:Ovrd:Expiration - longout - $(SYMBOL).astFF[40].Ovrd.Expiration - | io: output * - $(PREFIX):FF:040:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[40].Ovrd.Expiration - | io: output * - $(PREFIX):FF:040:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[40].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:040:Ovrd:StartDT - longout - $(SYMBOL).astFF[40].Ovrd.StartDT - | io: output * - $(PREFIX):FF:040:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[40].Ovrd.StartDT - | io: output * - $(PREFIX):FF:040:Reset - bo - $(SYMBOL).astFF[40].Reset - | io: output * - $(PREFIX):FF:040:Reset_RBV - bi - $(SYMBOL).astFF[40].Reset - | io: output * - $(PREFIX):FF:041:BeamPermitted_RBV - bi - $(SYMBOL).astFF[41].BeamPermitted - | io: input * - $(PREFIX):FF:041:Info:Desc_RBV - waveform - $(SYMBOL).astFF[41].Info.Desc - | io: input * - $(PREFIX):FF:041:Info:DevName_RBV - waveform - $(SYMBOL).astFF[41].Info.DevName - | io: input * - $(PREFIX):FF:041:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[41].Info.InfoString - | io: input * - $(PREFIX):FF:041:Info:InUse_RBV - bi - $(SYMBOL).astFF[41].Info.InUse - | io: input * - $(PREFIX):FF:041:Info:Path_RBV - waveform - $(SYMBOL).astFF[41].Info.sPath - | io: input * - $(PREFIX):FF:041:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[41].Info.TypeCode - | io: input * - $(PREFIX):FF:041:OK_RBV - bi - $(SYMBOL).astFF[41].OK - | io: input * - $(PREFIX):FF:041:Ovrd:Activate - bo - $(SYMBOL).astFF[41].Ovrd.Activate - | io: output * - $(PREFIX):FF:041:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[41].Ovrd.Activate - | io: output * - $(PREFIX):FF:041:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[41].Ovrd.Active - | io: input * - $(PREFIX):FF:041:Ovrd:Deactivate - bo - $(SYMBOL).astFF[41].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:041:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[41].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:041:Ovrd:Duration - longout - $(SYMBOL).astFF[41].Ovrd.Duration - | io: output * - $(PREFIX):FF:041:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[41].Ovrd.Duration - | io: output * - $(PREFIX):FF:041:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[41].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:041:Ovrd:Expiration - longout - $(SYMBOL).astFF[41].Ovrd.Expiration - | io: output * - $(PREFIX):FF:041:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[41].Ovrd.Expiration - | io: output * - $(PREFIX):FF:041:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[41].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:041:Ovrd:StartDT - longout - $(SYMBOL).astFF[41].Ovrd.StartDT - | io: output * - $(PREFIX):FF:041:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[41].Ovrd.StartDT - | io: output * - $(PREFIX):FF:041:Reset - bo - $(SYMBOL).astFF[41].Reset - | io: output * - $(PREFIX):FF:041:Reset_RBV - bi - $(SYMBOL).astFF[41].Reset - | io: output * - $(PREFIX):FF:042:BeamPermitted_RBV - bi - $(SYMBOL).astFF[42].BeamPermitted - | io: input * - $(PREFIX):FF:042:Info:Desc_RBV - waveform - $(SYMBOL).astFF[42].Info.Desc - | io: input * - $(PREFIX):FF:042:Info:DevName_RBV - waveform - $(SYMBOL).astFF[42].Info.DevName - | io: input * - $(PREFIX):FF:042:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[42].Info.InfoString - | io: input * - $(PREFIX):FF:042:Info:InUse_RBV - bi - $(SYMBOL).astFF[42].Info.InUse - | io: input * - $(PREFIX):FF:042:Info:Path_RBV - waveform - $(SYMBOL).astFF[42].Info.sPath - | io: input * - $(PREFIX):FF:042:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[42].Info.TypeCode - | io: input * - $(PREFIX):FF:042:OK_RBV - bi - $(SYMBOL).astFF[42].OK - | io: input * - $(PREFIX):FF:042:Ovrd:Activate - bo - $(SYMBOL).astFF[42].Ovrd.Activate - | io: output * - $(PREFIX):FF:042:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[42].Ovrd.Activate - | io: output * - $(PREFIX):FF:042:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[42].Ovrd.Active - | io: input * - $(PREFIX):FF:042:Ovrd:Deactivate - bo - $(SYMBOL).astFF[42].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:042:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[42].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:042:Ovrd:Duration - longout - $(SYMBOL).astFF[42].Ovrd.Duration - | io: output * - $(PREFIX):FF:042:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[42].Ovrd.Duration - | io: output * - $(PREFIX):FF:042:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[42].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:042:Ovrd:Expiration - longout - $(SYMBOL).astFF[42].Ovrd.Expiration - | io: output * - $(PREFIX):FF:042:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[42].Ovrd.Expiration - | io: output * - $(PREFIX):FF:042:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[42].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:042:Ovrd:StartDT - longout - $(SYMBOL).astFF[42].Ovrd.StartDT - | io: output * - $(PREFIX):FF:042:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[42].Ovrd.StartDT - | io: output * - $(PREFIX):FF:042:Reset - bo - $(SYMBOL).astFF[42].Reset - | io: output * - $(PREFIX):FF:042:Reset_RBV - bi - $(SYMBOL).astFF[42].Reset - | io: output * - $(PREFIX):FF:043:BeamPermitted_RBV - bi - $(SYMBOL).astFF[43].BeamPermitted - | io: input * - $(PREFIX):FF:043:Info:Desc_RBV - waveform - $(SYMBOL).astFF[43].Info.Desc - | io: input * - $(PREFIX):FF:043:Info:DevName_RBV - waveform - $(SYMBOL).astFF[43].Info.DevName - | io: input * - $(PREFIX):FF:043:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[43].Info.InfoString - | io: input * - $(PREFIX):FF:043:Info:InUse_RBV - bi - $(SYMBOL).astFF[43].Info.InUse - | io: input * - $(PREFIX):FF:043:Info:Path_RBV - waveform - $(SYMBOL).astFF[43].Info.sPath - | io: input * - $(PREFIX):FF:043:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[43].Info.TypeCode - | io: input * - $(PREFIX):FF:043:OK_RBV - bi - $(SYMBOL).astFF[43].OK - | io: input * - $(PREFIX):FF:043:Ovrd:Activate - bo - $(SYMBOL).astFF[43].Ovrd.Activate - | io: output * - $(PREFIX):FF:043:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[43].Ovrd.Activate - | io: output * - $(PREFIX):FF:043:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[43].Ovrd.Active - | io: input * - $(PREFIX):FF:043:Ovrd:Deactivate - bo - $(SYMBOL).astFF[43].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:043:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[43].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:043:Ovrd:Duration - longout - $(SYMBOL).astFF[43].Ovrd.Duration - | io: output * - $(PREFIX):FF:043:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[43].Ovrd.Duration - | io: output * - $(PREFIX):FF:043:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[43].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:043:Ovrd:Expiration - longout - $(SYMBOL).astFF[43].Ovrd.Expiration - | io: output * - $(PREFIX):FF:043:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[43].Ovrd.Expiration - | io: output * - $(PREFIX):FF:043:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[43].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:043:Ovrd:StartDT - longout - $(SYMBOL).astFF[43].Ovrd.StartDT - | io: output * - $(PREFIX):FF:043:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[43].Ovrd.StartDT - | io: output * - $(PREFIX):FF:043:Reset - bo - $(SYMBOL).astFF[43].Reset - | io: output * - $(PREFIX):FF:043:Reset_RBV - bi - $(SYMBOL).astFF[43].Reset - | io: output * - $(PREFIX):FF:044:BeamPermitted_RBV - bi - $(SYMBOL).astFF[44].BeamPermitted - | io: input * - $(PREFIX):FF:044:Info:Desc_RBV - waveform - $(SYMBOL).astFF[44].Info.Desc - | io: input * - $(PREFIX):FF:044:Info:DevName_RBV - waveform - $(SYMBOL).astFF[44].Info.DevName - | io: input * - $(PREFIX):FF:044:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[44].Info.InfoString - | io: input * - $(PREFIX):FF:044:Info:InUse_RBV - bi - $(SYMBOL).astFF[44].Info.InUse - | io: input * - $(PREFIX):FF:044:Info:Path_RBV - waveform - $(SYMBOL).astFF[44].Info.sPath - | io: input * - $(PREFIX):FF:044:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[44].Info.TypeCode - | io: input * - $(PREFIX):FF:044:OK_RBV - bi - $(SYMBOL).astFF[44].OK - | io: input * - $(PREFIX):FF:044:Ovrd:Activate - bo - $(SYMBOL).astFF[44].Ovrd.Activate - | io: output * - $(PREFIX):FF:044:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[44].Ovrd.Activate - | io: output * - $(PREFIX):FF:044:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[44].Ovrd.Active - | io: input * - $(PREFIX):FF:044:Ovrd:Deactivate - bo - $(SYMBOL).astFF[44].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:044:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[44].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:044:Ovrd:Duration - longout - $(SYMBOL).astFF[44].Ovrd.Duration - | io: output * - $(PREFIX):FF:044:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[44].Ovrd.Duration - | io: output * - $(PREFIX):FF:044:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[44].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:044:Ovrd:Expiration - longout - $(SYMBOL).astFF[44].Ovrd.Expiration - | io: output * - $(PREFIX):FF:044:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[44].Ovrd.Expiration - | io: output * - $(PREFIX):FF:044:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[44].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:044:Ovrd:StartDT - longout - $(SYMBOL).astFF[44].Ovrd.StartDT - | io: output * - $(PREFIX):FF:044:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[44].Ovrd.StartDT - | io: output * - $(PREFIX):FF:044:Reset - bo - $(SYMBOL).astFF[44].Reset - | io: output * - $(PREFIX):FF:044:Reset_RBV - bi - $(SYMBOL).astFF[44].Reset - | io: output * - $(PREFIX):FF:045:BeamPermitted_RBV - bi - $(SYMBOL).astFF[45].BeamPermitted - | io: input * - $(PREFIX):FF:045:Info:Desc_RBV - waveform - $(SYMBOL).astFF[45].Info.Desc - | io: input * - $(PREFIX):FF:045:Info:DevName_RBV - waveform - $(SYMBOL).astFF[45].Info.DevName - | io: input * - $(PREFIX):FF:045:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[45].Info.InfoString - | io: input * - $(PREFIX):FF:045:Info:InUse_RBV - bi - $(SYMBOL).astFF[45].Info.InUse - | io: input * - $(PREFIX):FF:045:Info:Path_RBV - waveform - $(SYMBOL).astFF[45].Info.sPath - | io: input * - $(PREFIX):FF:045:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[45].Info.TypeCode - | io: input * - $(PREFIX):FF:045:OK_RBV - bi - $(SYMBOL).astFF[45].OK - | io: input * - $(PREFIX):FF:045:Ovrd:Activate - bo - $(SYMBOL).astFF[45].Ovrd.Activate - | io: output * - $(PREFIX):FF:045:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[45].Ovrd.Activate - | io: output * - $(PREFIX):FF:045:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[45].Ovrd.Active - | io: input * - $(PREFIX):FF:045:Ovrd:Deactivate - bo - $(SYMBOL).astFF[45].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:045:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[45].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:045:Ovrd:Duration - longout - $(SYMBOL).astFF[45].Ovrd.Duration - | io: output * - $(PREFIX):FF:045:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[45].Ovrd.Duration - | io: output * - $(PREFIX):FF:045:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[45].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:045:Ovrd:Expiration - longout - $(SYMBOL).astFF[45].Ovrd.Expiration - | io: output * - $(PREFIX):FF:045:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[45].Ovrd.Expiration - | io: output * - $(PREFIX):FF:045:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[45].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:045:Ovrd:StartDT - longout - $(SYMBOL).astFF[45].Ovrd.StartDT - | io: output * - $(PREFIX):FF:045:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[45].Ovrd.StartDT - | io: output * - $(PREFIX):FF:045:Reset - bo - $(SYMBOL).astFF[45].Reset - | io: output * - $(PREFIX):FF:045:Reset_RBV - bi - $(SYMBOL).astFF[45].Reset - | io: output * - $(PREFIX):FF:046:BeamPermitted_RBV - bi - $(SYMBOL).astFF[46].BeamPermitted - | io: input * - $(PREFIX):FF:046:Info:Desc_RBV - waveform - $(SYMBOL).astFF[46].Info.Desc - | io: input * - $(PREFIX):FF:046:Info:DevName_RBV - waveform - $(SYMBOL).astFF[46].Info.DevName - | io: input * - $(PREFIX):FF:046:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[46].Info.InfoString - | io: input * - $(PREFIX):FF:046:Info:InUse_RBV - bi - $(SYMBOL).astFF[46].Info.InUse - | io: input * - $(PREFIX):FF:046:Info:Path_RBV - waveform - $(SYMBOL).astFF[46].Info.sPath - | io: input * - $(PREFIX):FF:046:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[46].Info.TypeCode - | io: input * - $(PREFIX):FF:046:OK_RBV - bi - $(SYMBOL).astFF[46].OK - | io: input * - $(PREFIX):FF:046:Ovrd:Activate - bo - $(SYMBOL).astFF[46].Ovrd.Activate - | io: output * - $(PREFIX):FF:046:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[46].Ovrd.Activate - | io: output * - $(PREFIX):FF:046:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[46].Ovrd.Active - | io: input * - $(PREFIX):FF:046:Ovrd:Deactivate - bo - $(SYMBOL).astFF[46].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:046:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[46].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:046:Ovrd:Duration - longout - $(SYMBOL).astFF[46].Ovrd.Duration - | io: output * - $(PREFIX):FF:046:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[46].Ovrd.Duration - | io: output * - $(PREFIX):FF:046:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[46].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:046:Ovrd:Expiration - longout - $(SYMBOL).astFF[46].Ovrd.Expiration - | io: output * - $(PREFIX):FF:046:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[46].Ovrd.Expiration - | io: output * - $(PREFIX):FF:046:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[46].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:046:Ovrd:StartDT - longout - $(SYMBOL).astFF[46].Ovrd.StartDT - | io: output * - $(PREFIX):FF:046:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[46].Ovrd.StartDT - | io: output * - $(PREFIX):FF:046:Reset - bo - $(SYMBOL).astFF[46].Reset - | io: output * - $(PREFIX):FF:046:Reset_RBV - bi - $(SYMBOL).astFF[46].Reset - | io: output * - $(PREFIX):FF:047:BeamPermitted_RBV - bi - $(SYMBOL).astFF[47].BeamPermitted - | io: input * - $(PREFIX):FF:047:Info:Desc_RBV - waveform - $(SYMBOL).astFF[47].Info.Desc - | io: input * - $(PREFIX):FF:047:Info:DevName_RBV - waveform - $(SYMBOL).astFF[47].Info.DevName - | io: input * - $(PREFIX):FF:047:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[47].Info.InfoString - | io: input * - $(PREFIX):FF:047:Info:InUse_RBV - bi - $(SYMBOL).astFF[47].Info.InUse - | io: input * - $(PREFIX):FF:047:Info:Path_RBV - waveform - $(SYMBOL).astFF[47].Info.sPath - | io: input * - $(PREFIX):FF:047:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[47].Info.TypeCode - | io: input * - $(PREFIX):FF:047:OK_RBV - bi - $(SYMBOL).astFF[47].OK - | io: input * - $(PREFIX):FF:047:Ovrd:Activate - bo - $(SYMBOL).astFF[47].Ovrd.Activate - | io: output * - $(PREFIX):FF:047:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[47].Ovrd.Activate - | io: output * - $(PREFIX):FF:047:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[47].Ovrd.Active - | io: input * - $(PREFIX):FF:047:Ovrd:Deactivate - bo - $(SYMBOL).astFF[47].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:047:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[47].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:047:Ovrd:Duration - longout - $(SYMBOL).astFF[47].Ovrd.Duration - | io: output * - $(PREFIX):FF:047:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[47].Ovrd.Duration - | io: output * - $(PREFIX):FF:047:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[47].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:047:Ovrd:Expiration - longout - $(SYMBOL).astFF[47].Ovrd.Expiration - | io: output * - $(PREFIX):FF:047:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[47].Ovrd.Expiration - | io: output * - $(PREFIX):FF:047:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[47].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:047:Ovrd:StartDT - longout - $(SYMBOL).astFF[47].Ovrd.StartDT - | io: output * - $(PREFIX):FF:047:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[47].Ovrd.StartDT - | io: output * - $(PREFIX):FF:047:Reset - bo - $(SYMBOL).astFF[47].Reset - | io: output * - $(PREFIX):FF:047:Reset_RBV - bi - $(SYMBOL).astFF[47].Reset - | io: output * - $(PREFIX):FF:048:BeamPermitted_RBV - bi - $(SYMBOL).astFF[48].BeamPermitted - | io: input * - $(PREFIX):FF:048:Info:Desc_RBV - waveform - $(SYMBOL).astFF[48].Info.Desc - | io: input * - $(PREFIX):FF:048:Info:DevName_RBV - waveform - $(SYMBOL).astFF[48].Info.DevName - | io: input * - $(PREFIX):FF:048:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[48].Info.InfoString - | io: input * - $(PREFIX):FF:048:Info:InUse_RBV - bi - $(SYMBOL).astFF[48].Info.InUse - | io: input * - $(PREFIX):FF:048:Info:Path_RBV - waveform - $(SYMBOL).astFF[48].Info.sPath - | io: input * - $(PREFIX):FF:048:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[48].Info.TypeCode - | io: input * - $(PREFIX):FF:048:OK_RBV - bi - $(SYMBOL).astFF[48].OK - | io: input * - $(PREFIX):FF:048:Ovrd:Activate - bo - $(SYMBOL).astFF[48].Ovrd.Activate - | io: output * - $(PREFIX):FF:048:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[48].Ovrd.Activate - | io: output * - $(PREFIX):FF:048:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[48].Ovrd.Active - | io: input * - $(PREFIX):FF:048:Ovrd:Deactivate - bo - $(SYMBOL).astFF[48].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:048:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[48].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:048:Ovrd:Duration - longout - $(SYMBOL).astFF[48].Ovrd.Duration - | io: output * - $(PREFIX):FF:048:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[48].Ovrd.Duration - | io: output * - $(PREFIX):FF:048:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[48].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:048:Ovrd:Expiration - longout - $(SYMBOL).astFF[48].Ovrd.Expiration - | io: output * - $(PREFIX):FF:048:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[48].Ovrd.Expiration - | io: output * - $(PREFIX):FF:048:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[48].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:048:Ovrd:StartDT - longout - $(SYMBOL).astFF[48].Ovrd.StartDT - | io: output * - $(PREFIX):FF:048:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[48].Ovrd.StartDT - | io: output * - $(PREFIX):FF:048:Reset - bo - $(SYMBOL).astFF[48].Reset - | io: output * - $(PREFIX):FF:048:Reset_RBV - bi - $(SYMBOL).astFF[48].Reset - | io: output * - $(PREFIX):FF:049:BeamPermitted_RBV - bi - $(SYMBOL).astFF[49].BeamPermitted - | io: input * - $(PREFIX):FF:049:Info:Desc_RBV - waveform - $(SYMBOL).astFF[49].Info.Desc - | io: input * - $(PREFIX):FF:049:Info:DevName_RBV - waveform - $(SYMBOL).astFF[49].Info.DevName - | io: input * - $(PREFIX):FF:049:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[49].Info.InfoString - | io: input * - $(PREFIX):FF:049:Info:InUse_RBV - bi - $(SYMBOL).astFF[49].Info.InUse - | io: input * - $(PREFIX):FF:049:Info:Path_RBV - waveform - $(SYMBOL).astFF[49].Info.sPath - | io: input * - $(PREFIX):FF:049:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[49].Info.TypeCode - | io: input * - $(PREFIX):FF:049:OK_RBV - bi - $(SYMBOL).astFF[49].OK - | io: input * - $(PREFIX):FF:049:Ovrd:Activate - bo - $(SYMBOL).astFF[49].Ovrd.Activate - | io: output * - $(PREFIX):FF:049:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[49].Ovrd.Activate - | io: output * - $(PREFIX):FF:049:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[49].Ovrd.Active - | io: input * - $(PREFIX):FF:049:Ovrd:Deactivate - bo - $(SYMBOL).astFF[49].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:049:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[49].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:049:Ovrd:Duration - longout - $(SYMBOL).astFF[49].Ovrd.Duration - | io: output * - $(PREFIX):FF:049:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[49].Ovrd.Duration - | io: output * - $(PREFIX):FF:049:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[49].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:049:Ovrd:Expiration - longout - $(SYMBOL).astFF[49].Ovrd.Expiration - | io: output * - $(PREFIX):FF:049:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[49].Ovrd.Expiration - | io: output * - $(PREFIX):FF:049:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[49].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:049:Ovrd:StartDT - longout - $(SYMBOL).astFF[49].Ovrd.StartDT - | io: output * - $(PREFIX):FF:049:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[49].Ovrd.StartDT - | io: output * - $(PREFIX):FF:049:Reset - bo - $(SYMBOL).astFF[49].Reset - | io: output * - $(PREFIX):FF:049:Reset_RBV - bi - $(SYMBOL).astFF[49].Reset - | io: output * - $(PREFIX):FF:050:BeamPermitted_RBV - bi - $(SYMBOL).astFF[50].BeamPermitted - | io: input * - $(PREFIX):FF:050:Info:Desc_RBV - waveform - $(SYMBOL).astFF[50].Info.Desc - | io: input * - $(PREFIX):FF:050:Info:DevName_RBV - waveform - $(SYMBOL).astFF[50].Info.DevName - | io: input * - $(PREFIX):FF:050:Info:InfoString_RBV - waveform - $(SYMBOL).astFF[50].Info.InfoString - | io: input * - $(PREFIX):FF:050:Info:InUse_RBV - bi - $(SYMBOL).astFF[50].Info.InUse - | io: input * - $(PREFIX):FF:050:Info:Path_RBV - waveform - $(SYMBOL).astFF[50].Info.sPath - | io: input * - $(PREFIX):FF:050:Info:TypeCode_RBV - longin - $(SYMBOL).astFF[50].Info.TypeCode - | io: input * - $(PREFIX):FF:050:OK_RBV - bi - $(SYMBOL).astFF[50].OK - | io: input * - $(PREFIX):FF:050:Ovrd:Activate - bo - $(SYMBOL).astFF[50].Ovrd.Activate - | io: output * - $(PREFIX):FF:050:Ovrd:Activate_RBV - bi - $(SYMBOL).astFF[50].Ovrd.Activate - | io: output * - $(PREFIX):FF:050:Ovrd:Active_RBV - bi - $(SYMBOL).astFF[50].Ovrd.Active - | io: input * - $(PREFIX):FF:050:Ovrd:Deactivate - bo - $(SYMBOL).astFF[50].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:050:Ovrd:Deactivate_RBV - bi - $(SYMBOL).astFF[50].Ovrd.Deactivate - | io: output * - $(PREFIX):FF:050:Ovrd:Duration - longout - $(SYMBOL).astFF[50].Ovrd.Duration - | io: output * - $(PREFIX):FF:050:Ovrd:Duration_RBV - longin - $(SYMBOL).astFF[50].Ovrd.Duration - | io: output * - $(PREFIX):FF:050:Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).astFF[50].Ovrd.ElapsedTime - | io: input * - $(PREFIX):FF:050:Ovrd:Expiration - longout - $(SYMBOL).astFF[50].Ovrd.Expiration - | io: output * - $(PREFIX):FF:050:Ovrd:Expiration_RBV - longin - $(SYMBOL).astFF[50].Ovrd.Expiration - | io: output * - $(PREFIX):FF:050:Ovrd:RemainingTime_RBV - longin - $(SYMBOL).astFF[50].Ovrd.RemainingTime - | io: input * - $(PREFIX):FF:050:Ovrd:StartDT - longout - $(SYMBOL).astFF[50].Ovrd.StartDT - | io: output * - $(PREFIX):FF:050:Ovrd:StartDT_RBV - longin - $(SYMBOL).astFF[50].Ovrd.StartDT - | io: output * - $(PREFIX):FF:050:Reset - bo - $(SYMBOL).astFF[50].Reset - | io: output * - $(PREFIX):FF:050:Reset_RBV - bi - $(SYMBOL).astFF[50].Reset - | io: output * - $(PREFIX):OK_RBV - bi - $(SYMBOL).xOK - | io: input * - $(PREFIX):RegistrationFailure - bo - $(SYMBOL).xFastFaultRegFail - | io: output * - $(PREFIX):RegistrationFailure_RBV - bi - $(SYMBOL).xFastFaultRegFail - | io: output PMPS.ST_BeamParams ^^^^^^^^^^^^^^^^^^ .. list-table:: :header-rows: 1 :align: center * - Record - Type - Description - Pragma * - $(PREFIX):Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):PhotonEnergyRanges_RBV - longin - $(SYMBOL).neVRange - | field: EGU eV | io: input * - $(PREFIX):Rate_RBV - longin - $(SYMBOL).nRate - | field: EGU Hz | io: input * - $(PREFIX):Transmission_RBV - ai - $(SYMBOL).nTran - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):Valid_RBV - bi - $(SYMBOL).xValid - | io: input * - $(PREFIX):Veto_RBV - waveform - $(SYMBOL).aVetoDevices - | io: input PMPS.ST_BP_ArbInternal ^^^^^^^^^^^^^^^^^^^^^^ .. list-table:: :header-rows: 1 :align: center * - Record - Type - Description - Pragma * - $(PREFIX):Cohort_RBV - longin - Cohort inc on each arb cycle - | io: input * - $(PREFIX):Device_RBV - waveform - $(SYMBOL).sDevName - | io: input * - $(PREFIX):ID_RBV - longin - $(SYMBOL).nId - | io: input * - $(PREFIX):Live_RBV - bi - $(SYMBOL).LiveInTable - | io: input * - $(PREFIX):PhotonEnergyRanges_RBV - longin - $(SYMBOL).neVRange - | field: EGU eV | io: input * - $(PREFIX):Rate_RBV - longin - $(SYMBOL).nRate - | field: EGU Hz | io: input * - $(PREFIX):Transmission_RBV - ai - $(SYMBOL).nTran - | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX):Valid_RBV - bi - $(SYMBOL).xValid - | io: input * - $(PREFIX):Veto_RBV - waveform - $(SYMBOL).aVetoDevices - | io: input PMPS.ST_FF ^^^^^^^^^^ .. list-table:: :header-rows: 1 :align: center * - Record - Type - Description - Pragma * - $(PREFIX):BeamPermitted_RBV - bi - $(SYMBOL).BeamPermitted - | io: input * - $(PREFIX):Info:Desc_RBV - waveform - $(SYMBOL).Info.Desc - | io: input * - $(PREFIX):Info:DevName_RBV - waveform - $(SYMBOL).Info.DevName - | io: input * - $(PREFIX):Info:InfoString_RBV - waveform - $(SYMBOL).Info.InfoString - | io: input * - $(PREFIX):Info:InUse_RBV - bi - $(SYMBOL).Info.InUse - | io: input * - $(PREFIX):Info:Path_RBV - waveform - $(SYMBOL).Info.sPath - | io: input * - $(PREFIX):Info:TypeCode_RBV - longin - $(SYMBOL).Info.TypeCode - | io: input * - $(PREFIX):OK_RBV - bi - $(SYMBOL).OK - | io: input * - $(PREFIX):Ovrd:Activate - bo - $(SYMBOL).Ovrd.Activate - | io: output * - $(PREFIX):Ovrd:Activate_RBV - bi - $(SYMBOL).Ovrd.Activate - | io: output * - $(PREFIX):Ovrd:Active_RBV - bi - $(SYMBOL).Ovrd.Active - | io: input * - $(PREFIX):Ovrd:Deactivate - bo - $(SYMBOL).Ovrd.Deactivate - | io: output * - $(PREFIX):Ovrd:Deactivate_RBV - bi - $(SYMBOL).Ovrd.Deactivate - | io: output * - $(PREFIX):Ovrd:Duration - longout - $(SYMBOL).Ovrd.Duration - | io: output * - $(PREFIX):Ovrd:Duration_RBV - longin - $(SYMBOL).Ovrd.Duration - | io: output * - $(PREFIX):Ovrd:ElapsedTime_RBV - longin - $(SYMBOL).Ovrd.ElapsedTime - | io: input * - $(PREFIX):Ovrd:Expiration - longout - $(SYMBOL).Ovrd.Expiration - | io: output * - $(PREFIX):Ovrd:Expiration_RBV - longin - $(SYMBOL).Ovrd.Expiration - | io: output * - $(PREFIX):Ovrd:RemainingTime_RBV - longin - $(SYMBOL).Ovrd.RemainingTime - | io: input * - $(PREFIX):Ovrd:StartDT - longout - $(SYMBOL).Ovrd.StartDT - | io: output * - $(PREFIX):Ovrd:StartDT_RBV - longin - $(SYMBOL).Ovrd.StartDT - | io: output * - $(PREFIX):Reset - bo - $(SYMBOL).Reset - | io: output * - $(PREFIX):Reset_RBV - bi - $(SYMBOL).Reset - | io: output PMPS.ST_FFInfo ^^^^^^^^^^^^^^ .. list-table:: :header-rows: 1 :align: center * - Record - Type - Description - Pragma * - $(PREFIX):Desc_RBV - waveform - $(SYMBOL).Desc - | io: input * - $(PREFIX):DevName_RBV - waveform - $(SYMBOL).DevName - | io: input * - $(PREFIX):InfoString_RBV - waveform - $(SYMBOL).InfoString - | io: input * - $(PREFIX):InUse_RBV - bi - $(SYMBOL).InUse - | io: input * - $(PREFIX):Path_RBV - waveform - $(SYMBOL).sPath - | io: input * - $(PREFIX):TypeCode_RBV - longin - $(SYMBOL).TypeCode - | io: input PMPS.ST_FFOverride ^^^^^^^^^^^^^^^^^^ .. list-table:: :header-rows: 1 :align: center * - Record - Type - Description - Pragma * - $(PREFIX):Activate - bo - $(SYMBOL).Activate - | io: output * - $(PREFIX):Activate_RBV - bi - $(SYMBOL).Activate - | io: output * - $(PREFIX):Active_RBV - bi - $(SYMBOL).Active - | io: input * - $(PREFIX):Deactivate - bo - $(SYMBOL).Deactivate - | io: output * - $(PREFIX):Deactivate_RBV - bi - $(SYMBOL).Deactivate - | io: output * - $(PREFIX):Duration - longout - $(SYMBOL).Duration - | io: output * - $(PREFIX):Duration_RBV - longin - $(SYMBOL).Duration - | io: output * - $(PREFIX):ElapsedTime_RBV - longin - $(SYMBOL).ElapsedTime - | io: input * - $(PREFIX):Expiration - longout - $(SYMBOL).Expiration - | io: output * - $(PREFIX):Expiration_RBV - longin - $(SYMBOL).Expiration - | io: output * - $(PREFIX):RemainingTime_RBV - longin - $(SYMBOL).RemainingTime - | io: input * - $(PREFIX):StartDT - longout - $(SYMBOL).StartDT - | io: output * - $(PREFIX):StartDT_RBV - longin - $(SYMBOL).StartDT - | io: output PMPS.ST_PMPS_Aperture ^^^^^^^^^^^^^^^^^^^^^ .. list-table:: :header-rows: 1 :align: center * - Record - Type - Description - Pragma * - $(PREFIX):Height_RBV - ai - $(SYMBOL).Height - | field: EGU mm | io: input * - $(PREFIX):OK_RBV - bi - $(SYMBOL).xOK - | io: input * - $(PREFIX):Width_RBV - ai - $(SYMBOL).Width - | field: EGU mm | io: input PMPS.T_HashTableEntry ^^^^^^^^^^^^^^^^^^^^^ .. list-table:: :header-rows: 1 :align: center * - Record - Type - Description - Pragma * - $(PREFIX):Key_RBV - longin - $(SYMBOL).key - | io: input ST_LoggingEventInfo ^^^^^^^^^^^^^^^^^^^ .. list-table:: :header-rows: 1 :align: center * - Record - Type - Description - Pragma * - $(PREFIX):EventClass_RBV - waveform - TwinCAT Event class - | io: input * - $(PREFIX):EventType_RBV - mbbi - The event type - | io: input * - $(PREFIX):Hostname_RBV - waveform - PLC Hostname - | io: input * - $(PREFIX):Message_RBV - waveform - $(SYMBOL).msg - | io: input * - $(PREFIX):MessageID_RBV - longin - TwinCAT Message ID - | io: input * - $(PREFIX):MessageJSON_RBV - waveform - Metadata with the message - | io: input * - $(PREFIX):Schema_RBV - waveform - Schema string - | io: input * - $(PREFIX):Severity_RBV - mbbi - TcEventSeverity - | field: ONST Info | field: THST Error | field: TWST Warning | field: ZRST Verbose | io: input * - $(PREFIX):Source_RBV - waveform - $(SYMBOL).source - | io: input * - $(PREFIX):Timestamp_RBV - ai - Unix timestamp - | io: input ST_PMPS_Aperture_IO ^^^^^^^^^^^^^^^^^^^ .. list-table:: :header-rows: 1 :align: center * - Record - Type - Description - Pragma * - $(PREFIX):Height_RBV - ai - $(SYMBOL).Height - | field: EGU mm | io: input * - $(PREFIX):OK_RBV - bi - $(SYMBOL).xOK - | io: input * - $(PREFIX):Width_RBV - ai - $(SYMBOL).Width - | field: EGU mm | io: input Database Records ---------------- .. list-table:: :header-rows: 1 :align: center * - Record - Type - Description - Pragma * - $(PREFIX)LCLSGeneral:GlobalLogTrickleTrip_RBV - bi - Tripped by overall log count - | io: input * - $(PREFIX)LCLSGeneral:LogHost_RBV - waveform - The log host IP address - | io: output * - $(PREFIX)LCLSGeneral:LogHost - waveform - The log host IP address - | io: output * - $(PREFIX)LCLSGeneral:LogPort_RBV - longin - The log host UDP port - | io: output * - $(PREFIX)LCLSGeneral:LogPort - longout - The log host UDP port - | io: output * - $(PREFIX)LCLSGeneral:LogMessageCount_RBV - longin - Total log messages on the last cycle - | io: input * - MFX:ATM:MMS:Y:PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:Y:PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:Y:PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:Y:PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:Y:PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:Y:PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:Y:PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:ATM:MMS:Y:PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:ATM:MMS:Y:PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:Y:PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - MFX:ATM:MMS:Y:PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:ATM:MMS:Y:PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:ATM:MMS:Y:PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:Y:PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:Y:PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:Y:PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:Y:PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:Y:PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - MFX:ATM:MMS:Y:PLC:bHomeCmd - bo - Start the homing routine - | io: output * - MFX:ATM:MMS:Y:PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - MFX:ATM:MMS:Y:PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:Y:PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:Y:PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - MFX:ATM:MMS:Y:PLC:bMoveCmd - bo - Start a move - | io: output * - MFX:ATM:MMS:Y:PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:Y:PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:ATM:MMS:Y:PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:ATM:MMS:Y:PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:Y:PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:ATM:MMS:Y:PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:ATM:MMS:Y:PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - MFX:ATM:MMS:Y:PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - MFX:ATM:MMS:Y:PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - MFX:ATM:MMS:Y:PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - MFX:ATM:MMS:Y:PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - MFX:ATM:MMS:Y:PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - MFX:ATM:MMS:Y:PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - MFX:ATM:MMS:Y:PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - MFX:ATM:MMS:Y:PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - MFX:ATM:MMS:Y:PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - MFX:ATM:MMS:Y:PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - MFX:ATM:MMS:Y:PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - MFX:ATM:MMS:Y:PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - MFX:ATM:MMS:Y:PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - MFX:ATM:MMS:Y:PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - MFX:ATM:MMS:Y:PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - MFX:ATM:MMS:Y:PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - MFX:ATM:MMS:Y:PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - MFX:ATM:MMS:Y:PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - MFX:ATM:MMS:Y:PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - MFX:ATM:MMS:Y:PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - MFX:ATM:MMS:Y:PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - MFX:ATM:MMS:Y:PLC:sName_RBV - waveform - PLC program name - | io: input * - MFX:LJH:DET:X:PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:DET:X:PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:DET:X:PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:DET:X:PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:DET:X:PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:DET:X:PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:DET:X:PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:DET:X:PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:DET:X:PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:DET:X:PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - MFX:LJH:DET:X:PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:DET:X:PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:DET:X:PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:DET:X:PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:DET:X:PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:DET:X:PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:DET:X:PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:DET:X:PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - MFX:LJH:DET:X:PLC:bHomeCmd - bo - Start the homing routine - | io: output * - MFX:LJH:DET:X:PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - MFX:LJH:DET:X:PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:DET:X:PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:DET:X:PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - MFX:LJH:DET:X:PLC:bMoveCmd - bo - Start a move - | io: output * - MFX:LJH:DET:X:PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:DET:X:PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:DET:X:PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:DET:X:PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:DET:X:PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:LJH:DET:X:PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:LJH:DET:X:PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - MFX:LJH:DET:X:PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - MFX:LJH:DET:X:PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - MFX:LJH:DET:X:PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - MFX:LJH:DET:X:PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - MFX:LJH:DET:X:PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - MFX:LJH:DET:X:PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - MFX:LJH:DET:X:PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - MFX:LJH:DET:X:PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - MFX:LJH:DET:X:PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - MFX:LJH:DET:X:PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - MFX:LJH:DET:X:PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - MFX:LJH:DET:X:PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - MFX:LJH:DET:X:PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - MFX:LJH:DET:X:PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - MFX:LJH:DET:X:PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - MFX:LJH:DET:X:PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - MFX:LJH:DET:X:PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - MFX:LJH:DET:X:PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - MFX:LJH:DET:X:PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - MFX:LJH:DET:X:PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - MFX:LJH:DET:X:PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - MFX:LJH:DET:X:PLC:sName_RBV - waveform - PLC program name - | io: input * - MFX:LJH:SS:TOP_X:PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:TOP_X:PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:TOP_X:PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:TOP_X:PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:TOP_X:PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:TOP_X:PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:TOP_X:PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:SS:TOP_X:PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:SS:TOP_X:PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:TOP_X:PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - MFX:LJH:SS:TOP_X:PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:SS:TOP_X:PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:SS:TOP_X:PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:TOP_X:PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:TOP_X:PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:TOP_X:PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:TOP_X:PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:TOP_X:PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - MFX:LJH:SS:TOP_X:PLC:bHomeCmd - bo - Start the homing routine - | io: output * - MFX:LJH:SS:TOP_X:PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - MFX:LJH:SS:TOP_X:PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:TOP_X:PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:TOP_X:PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - MFX:LJH:SS:TOP_X:PLC:bMoveCmd - bo - Start a move - | io: output * - MFX:LJH:SS:TOP_X:PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:TOP_X:PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:SS:TOP_X:PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:SS:TOP_X:PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:TOP_X:PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:LJH:SS:TOP_X:PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:LJH:SS:TOP_X:PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - MFX:LJH:SS:TOP_X:PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - MFX:LJH:SS:TOP_X:PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - MFX:LJH:SS:TOP_X:PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - MFX:LJH:SS:TOP_X:PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - MFX:LJH:SS:TOP_X:PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - MFX:LJH:SS:TOP_X:PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - MFX:LJH:SS:TOP_X:PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - MFX:LJH:SS:TOP_X:PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - MFX:LJH:SS:TOP_X:PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - MFX:LJH:SS:TOP_X:PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - MFX:LJH:SS:TOP_X:PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - MFX:LJH:SS:TOP_X:PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - MFX:LJH:SS:TOP_X:PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - MFX:LJH:SS:TOP_X:PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - MFX:LJH:SS:TOP_X:PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - MFX:LJH:SS:TOP_X:PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - MFX:LJH:SS:TOP_X:PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - MFX:LJH:SS:TOP_X:PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - MFX:LJH:SS:TOP_X:PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - MFX:LJH:SS:TOP_X:PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - MFX:LJH:SS:TOP_X:PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - MFX:LJH:SS:TOP_X:PLC:sName_RBV - waveform - PLC program name - | io: input * - MFX:LJH:SS:TOP_Y:PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:TOP_Y:PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:TOP_Y:PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:TOP_Y:PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:TOP_Y:PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:TOP_Y:PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:TOP_Y:PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:SS:TOP_Y:PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:SS:TOP_Y:PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:TOP_Y:PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - MFX:LJH:SS:TOP_Y:PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:SS:TOP_Y:PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:SS:TOP_Y:PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:TOP_Y:PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:TOP_Y:PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:TOP_Y:PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:TOP_Y:PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:TOP_Y:PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - MFX:LJH:SS:TOP_Y:PLC:bHomeCmd - bo - Start the homing routine - | io: output * - MFX:LJH:SS:TOP_Y:PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - MFX:LJH:SS:TOP_Y:PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:TOP_Y:PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:TOP_Y:PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - MFX:LJH:SS:TOP_Y:PLC:bMoveCmd - bo - Start a move - | io: output * - MFX:LJH:SS:TOP_Y:PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:TOP_Y:PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:SS:TOP_Y:PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:SS:TOP_Y:PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:TOP_Y:PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:LJH:SS:TOP_Y:PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:LJH:SS:TOP_Y:PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - MFX:LJH:SS:TOP_Y:PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - MFX:LJH:SS:TOP_Y:PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - MFX:LJH:SS:TOP_Y:PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - MFX:LJH:SS:TOP_Y:PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - MFX:LJH:SS:TOP_Y:PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - MFX:LJH:SS:TOP_Y:PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - MFX:LJH:SS:TOP_Y:PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - MFX:LJH:SS:TOP_Y:PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - MFX:LJH:SS:TOP_Y:PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - MFX:LJH:SS:TOP_Y:PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - MFX:LJH:SS:TOP_Y:PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - MFX:LJH:SS:TOP_Y:PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - MFX:LJH:SS:TOP_Y:PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - MFX:LJH:SS:TOP_Y:PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - MFX:LJH:SS:TOP_Y:PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - MFX:LJH:SS:TOP_Y:PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - MFX:LJH:SS:TOP_Y:PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - MFX:LJH:SS:TOP_Y:PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - MFX:LJH:SS:TOP_Y:PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - MFX:LJH:SS:TOP_Y:PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - MFX:LJH:SS:TOP_Y:PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - MFX:LJH:SS:TOP_Y:PLC:sName_RBV - waveform - PLC program name - | io: input * - MFX:LJH:SS:BOT_X:PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:BOT_X:PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:BOT_X:PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:BOT_X:PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:BOT_X:PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:BOT_X:PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:BOT_X:PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:SS:BOT_X:PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:SS:BOT_X:PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:BOT_X:PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - MFX:LJH:SS:BOT_X:PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:SS:BOT_X:PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:SS:BOT_X:PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:BOT_X:PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:BOT_X:PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:BOT_X:PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:BOT_X:PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:BOT_X:PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - MFX:LJH:SS:BOT_X:PLC:bHomeCmd - bo - Start the homing routine - | io: output * - MFX:LJH:SS:BOT_X:PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - MFX:LJH:SS:BOT_X:PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:BOT_X:PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:BOT_X:PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - MFX:LJH:SS:BOT_X:PLC:bMoveCmd - bo - Start a move - | io: output * - MFX:LJH:SS:BOT_X:PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:BOT_X:PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:SS:BOT_X:PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:SS:BOT_X:PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:BOT_X:PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:LJH:SS:BOT_X:PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:LJH:SS:BOT_X:PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - MFX:LJH:SS:BOT_X:PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - MFX:LJH:SS:BOT_X:PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - MFX:LJH:SS:BOT_X:PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - MFX:LJH:SS:BOT_X:PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - MFX:LJH:SS:BOT_X:PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - MFX:LJH:SS:BOT_X:PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - MFX:LJH:SS:BOT_X:PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - MFX:LJH:SS:BOT_X:PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - MFX:LJH:SS:BOT_X:PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - MFX:LJH:SS:BOT_X:PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - MFX:LJH:SS:BOT_X:PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - MFX:LJH:SS:BOT_X:PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - MFX:LJH:SS:BOT_X:PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - MFX:LJH:SS:BOT_X:PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - MFX:LJH:SS:BOT_X:PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - MFX:LJH:SS:BOT_X:PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - MFX:LJH:SS:BOT_X:PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - MFX:LJH:SS:BOT_X:PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - MFX:LJH:SS:BOT_X:PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - MFX:LJH:SS:BOT_X:PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - MFX:LJH:SS:BOT_X:PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - MFX:LJH:SS:BOT_X:PLC:sName_RBV - waveform - PLC program name - | io: input * - MFX:LJH:SS:BOT_Y:PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:BOT_Y:PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:BOT_Y:PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:BOT_Y:PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:BOT_Y:PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:BOT_Y:PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:BOT_Y:PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:SS:BOT_Y:PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:SS:BOT_Y:PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:BOT_Y:PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - MFX:LJH:SS:BOT_Y:PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:SS:BOT_Y:PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:SS:BOT_Y:PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:BOT_Y:PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:BOT_Y:PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:BOT_Y:PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:BOT_Y:PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:BOT_Y:PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - MFX:LJH:SS:BOT_Y:PLC:bHomeCmd - bo - Start the homing routine - | io: output * - MFX:LJH:SS:BOT_Y:PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - MFX:LJH:SS:BOT_Y:PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:BOT_Y:PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:BOT_Y:PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - MFX:LJH:SS:BOT_Y:PLC:bMoveCmd - bo - Start a move - | io: output * - MFX:LJH:SS:BOT_Y:PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:BOT_Y:PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:SS:BOT_Y:PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:SS:BOT_Y:PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:SS:BOT_Y:PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:LJH:SS:BOT_Y:PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:LJH:SS:BOT_Y:PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - MFX:LJH:SS:BOT_Y:PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - MFX:LJH:SS:BOT_Y:PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - MFX:LJH:SS:BOT_Y:PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - MFX:LJH:SS:BOT_Y:PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - MFX:LJH:SS:BOT_Y:PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - MFX:LJH:SS:BOT_Y:PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - MFX:LJH:SS:BOT_Y:PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - MFX:LJH:SS:BOT_Y:PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - MFX:LJH:SS:BOT_Y:PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - MFX:LJH:SS:BOT_Y:PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - MFX:LJH:SS:BOT_Y:PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - MFX:LJH:SS:BOT_Y:PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - MFX:LJH:SS:BOT_Y:PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - MFX:LJH:SS:BOT_Y:PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - MFX:LJH:SS:BOT_Y:PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - MFX:LJH:SS:BOT_Y:PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - MFX:LJH:SS:BOT_Y:PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - MFX:LJH:SS:BOT_Y:PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - MFX:LJH:SS:BOT_Y:PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - MFX:LJH:SS:BOT_Y:PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - MFX:LJH:SS:BOT_Y:PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - MFX:LJH:SS:BOT_Y:PLC:sName_RBV - waveform - PLC program name - | io: input * - MFX:SPEC:C1:X:PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:X:PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:X:PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:X:PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:X:PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:X:PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:X:PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C1:X:PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C1:X:PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:X:PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - MFX:SPEC:C1:X:PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C1:X:PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C1:X:PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:X:PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:X:PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:X:PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:X:PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:X:PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - MFX:SPEC:C1:X:PLC:bHomeCmd - bo - Start the homing routine - | io: output * - MFX:SPEC:C1:X:PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - MFX:SPEC:C1:X:PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:X:PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:X:PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - MFX:SPEC:C1:X:PLC:bMoveCmd - bo - Start a move - | io: output * - MFX:SPEC:C1:X:PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:X:PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C1:X:PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C1:X:PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:X:PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:C1:X:PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:C1:X:PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:C1:X:PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:C1:X:PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:C1:X:PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:C1:X:PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:C1:X:PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:C1:X:PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - MFX:SPEC:C1:X:PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:C1:X:PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:C1:X:PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:C1:X:PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:C1:X:PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - MFX:SPEC:C1:X:PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:C1:X:PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:C1:X:PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:C1:X:PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:C1:X:PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - MFX:SPEC:C1:X:PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - MFX:SPEC:C1:X:PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - MFX:SPEC:C1:X:PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - MFX:SPEC:C1:X:PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - MFX:SPEC:C1:X:PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - MFX:SPEC:C1:X:PLC:sName_RBV - waveform - PLC program name - | io: input * - MFX:SPEC:C1:ROT:PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:ROT:PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:ROT:PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:ROT:PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:ROT:PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:ROT:PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:ROT:PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C1:ROT:PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C1:ROT:PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:ROT:PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - MFX:SPEC:C1:ROT:PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C1:ROT:PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C1:ROT:PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:ROT:PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:ROT:PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:ROT:PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:ROT:PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:ROT:PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - MFX:SPEC:C1:ROT:PLC:bHomeCmd - bo - Start the homing routine - | io: output * - MFX:SPEC:C1:ROT:PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - MFX:SPEC:C1:ROT:PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:ROT:PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:ROT:PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - MFX:SPEC:C1:ROT:PLC:bMoveCmd - bo - Start a move - | io: output * - MFX:SPEC:C1:ROT:PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:ROT:PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C1:ROT:PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C1:ROT:PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:ROT:PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:C1:ROT:PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:C1:ROT:PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:C1:ROT:PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:C1:ROT:PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:C1:ROT:PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:C1:ROT:PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:C1:ROT:PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:C1:ROT:PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - MFX:SPEC:C1:ROT:PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:C1:ROT:PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:C1:ROT:PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:C1:ROT:PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:C1:ROT:PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - MFX:SPEC:C1:ROT:PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:C1:ROT:PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:C1:ROT:PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:C1:ROT:PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:C1:ROT:PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - MFX:SPEC:C1:ROT:PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - MFX:SPEC:C1:ROT:PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - MFX:SPEC:C1:ROT:PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - MFX:SPEC:C1:ROT:PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - MFX:SPEC:C1:ROT:PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - MFX:SPEC:C1:ROT:PLC:sName_RBV - waveform - PLC program name - | io: input * - MFX:SPEC:C1:TILT:PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:TILT:PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:TILT:PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:TILT:PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:TILT:PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:TILT:PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:TILT:PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C1:TILT:PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C1:TILT:PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:TILT:PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - MFX:SPEC:C1:TILT:PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C1:TILT:PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C1:TILT:PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:TILT:PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:TILT:PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:TILT:PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:TILT:PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:TILT:PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - MFX:SPEC:C1:TILT:PLC:bHomeCmd - bo - Start the homing routine - | io: output * - MFX:SPEC:C1:TILT:PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - MFX:SPEC:C1:TILT:PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:TILT:PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:TILT:PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - MFX:SPEC:C1:TILT:PLC:bMoveCmd - bo - Start a move - | io: output * - MFX:SPEC:C1:TILT:PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:TILT:PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C1:TILT:PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C1:TILT:PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C1:TILT:PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:C1:TILT:PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:C1:TILT:PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:C1:TILT:PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:C1:TILT:PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:C1:TILT:PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:C1:TILT:PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:C1:TILT:PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:C1:TILT:PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - MFX:SPEC:C1:TILT:PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:C1:TILT:PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:C1:TILT:PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:C1:TILT:PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:C1:TILT:PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - MFX:SPEC:C1:TILT:PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:C1:TILT:PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:C1:TILT:PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:C1:TILT:PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:C1:TILT:PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - MFX:SPEC:C1:TILT:PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - MFX:SPEC:C1:TILT:PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - MFX:SPEC:C1:TILT:PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - MFX:SPEC:C1:TILT:PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - MFX:SPEC:C1:TILT:PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - MFX:SPEC:C1:TILT:PLC:sName_RBV - waveform - PLC program name - | io: input * - MFX:SPEC:C2:X:PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:X:PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:X:PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:X:PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:X:PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:X:PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:X:PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C2:X:PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C2:X:PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:X:PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - MFX:SPEC:C2:X:PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C2:X:PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C2:X:PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:X:PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:X:PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:X:PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:X:PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:X:PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - MFX:SPEC:C2:X:PLC:bHomeCmd - bo - Start the homing routine - | io: output * - MFX:SPEC:C2:X:PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - MFX:SPEC:C2:X:PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:X:PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:X:PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - MFX:SPEC:C2:X:PLC:bMoveCmd - bo - Start a move - | io: output * - MFX:SPEC:C2:X:PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:X:PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C2:X:PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C2:X:PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:X:PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:C2:X:PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:C2:X:PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:C2:X:PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:C2:X:PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:C2:X:PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:C2:X:PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:C2:X:PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:C2:X:PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - MFX:SPEC:C2:X:PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:C2:X:PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:C2:X:PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:C2:X:PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:C2:X:PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - MFX:SPEC:C2:X:PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:C2:X:PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:C2:X:PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:C2:X:PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:C2:X:PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - MFX:SPEC:C2:X:PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - MFX:SPEC:C2:X:PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - MFX:SPEC:C2:X:PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - MFX:SPEC:C2:X:PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - MFX:SPEC:C2:X:PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - MFX:SPEC:C2:X:PLC:sName_RBV - waveform - PLC program name - | io: input * - MFX:SPEC:C2:ROT:PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:ROT:PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:ROT:PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:ROT:PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:ROT:PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:ROT:PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:ROT:PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C2:ROT:PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C2:ROT:PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:ROT:PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - MFX:SPEC:C2:ROT:PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C2:ROT:PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C2:ROT:PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:ROT:PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:ROT:PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:ROT:PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:ROT:PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:ROT:PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - MFX:SPEC:C2:ROT:PLC:bHomeCmd - bo - Start the homing routine - | io: output * - MFX:SPEC:C2:ROT:PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - MFX:SPEC:C2:ROT:PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:ROT:PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:ROT:PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - MFX:SPEC:C2:ROT:PLC:bMoveCmd - bo - Start a move - | io: output * - MFX:SPEC:C2:ROT:PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:ROT:PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C2:ROT:PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C2:ROT:PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:ROT:PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:C2:ROT:PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:C2:ROT:PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:C2:ROT:PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:C2:ROT:PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:C2:ROT:PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:C2:ROT:PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:C2:ROT:PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:C2:ROT:PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - MFX:SPEC:C2:ROT:PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:C2:ROT:PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:C2:ROT:PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:C2:ROT:PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:C2:ROT:PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - MFX:SPEC:C2:ROT:PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:C2:ROT:PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:C2:ROT:PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:C2:ROT:PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:C2:ROT:PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - MFX:SPEC:C2:ROT:PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - MFX:SPEC:C2:ROT:PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - MFX:SPEC:C2:ROT:PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - MFX:SPEC:C2:ROT:PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - MFX:SPEC:C2:ROT:PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - MFX:SPEC:C2:ROT:PLC:sName_RBV - waveform - PLC program name - | io: input * - MFX:ATM:MMS:X:PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:X:PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:X:PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:X:PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:X:PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:X:PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:X:PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:ATM:MMS:X:PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:ATM:MMS:X:PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:X:PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - MFX:ATM:MMS:X:PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:ATM:MMS:X:PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:ATM:MMS:X:PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:X:PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:X:PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:X:PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:X:PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:X:PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - MFX:ATM:MMS:X:PLC:bHomeCmd - bo - Start the homing routine - | io: output * - MFX:ATM:MMS:X:PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - MFX:ATM:MMS:X:PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:X:PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:X:PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - MFX:ATM:MMS:X:PLC:bMoveCmd - bo - Start a move - | io: output * - MFX:ATM:MMS:X:PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:X:PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:ATM:MMS:X:PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:ATM:MMS:X:PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:X:PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:ATM:MMS:X:PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:ATM:MMS:X:PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - MFX:ATM:MMS:X:PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - MFX:ATM:MMS:X:PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - MFX:ATM:MMS:X:PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - MFX:ATM:MMS:X:PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - MFX:ATM:MMS:X:PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - MFX:ATM:MMS:X:PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - MFX:ATM:MMS:X:PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - MFX:ATM:MMS:X:PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - MFX:ATM:MMS:X:PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - MFX:ATM:MMS:X:PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - MFX:ATM:MMS:X:PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - MFX:ATM:MMS:X:PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - MFX:ATM:MMS:X:PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - MFX:ATM:MMS:X:PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - MFX:ATM:MMS:X:PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - MFX:ATM:MMS:X:PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - MFX:ATM:MMS:X:PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - MFX:ATM:MMS:X:PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - MFX:ATM:MMS:X:PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - MFX:ATM:MMS:X:PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - MFX:ATM:MMS:X:PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - MFX:ATM:MMS:X:PLC:sName_RBV - waveform - PLC program name - | io: input * - MFX:SPEC:C2:TILT:PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:TILT:PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:TILT:PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:TILT:PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:TILT:PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:TILT:PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:TILT:PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C2:TILT:PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C2:TILT:PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:TILT:PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - MFX:SPEC:C2:TILT:PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C2:TILT:PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C2:TILT:PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:TILT:PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:TILT:PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:TILT:PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:TILT:PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:TILT:PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - MFX:SPEC:C2:TILT:PLC:bHomeCmd - bo - Start the homing routine - | io: output * - MFX:SPEC:C2:TILT:PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - MFX:SPEC:C2:TILT:PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:TILT:PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:TILT:PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - MFX:SPEC:C2:TILT:PLC:bMoveCmd - bo - Start a move - | io: output * - MFX:SPEC:C2:TILT:PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:TILT:PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C2:TILT:PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C2:TILT:PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C2:TILT:PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:C2:TILT:PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:C2:TILT:PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:C2:TILT:PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:C2:TILT:PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:C2:TILT:PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:C2:TILT:PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:C2:TILT:PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:C2:TILT:PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - MFX:SPEC:C2:TILT:PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:C2:TILT:PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:C2:TILT:PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:C2:TILT:PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:C2:TILT:PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - MFX:SPEC:C2:TILT:PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:C2:TILT:PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:C2:TILT:PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:C2:TILT:PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:C2:TILT:PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - MFX:SPEC:C2:TILT:PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - MFX:SPEC:C2:TILT:PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - MFX:SPEC:C2:TILT:PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - MFX:SPEC:C2:TILT:PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - MFX:SPEC:C2:TILT:PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - MFX:SPEC:C2:TILT:PLC:sName_RBV - waveform - PLC program name - | io: input * - MFX:SPEC:C3:X:PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:X:PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:X:PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:X:PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:X:PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:X:PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:X:PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C3:X:PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C3:X:PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:X:PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - MFX:SPEC:C3:X:PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C3:X:PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C3:X:PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:X:PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:X:PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:X:PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:X:PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:X:PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - MFX:SPEC:C3:X:PLC:bHomeCmd - bo - Start the homing routine - | io: output * - MFX:SPEC:C3:X:PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - MFX:SPEC:C3:X:PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:X:PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:X:PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - MFX:SPEC:C3:X:PLC:bMoveCmd - bo - Start a move - | io: output * - MFX:SPEC:C3:X:PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:X:PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C3:X:PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C3:X:PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:X:PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:C3:X:PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:C3:X:PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:C3:X:PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:C3:X:PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:C3:X:PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:C3:X:PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:C3:X:PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:C3:X:PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - MFX:SPEC:C3:X:PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:C3:X:PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:C3:X:PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:C3:X:PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:C3:X:PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - MFX:SPEC:C3:X:PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:C3:X:PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:C3:X:PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:C3:X:PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:C3:X:PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - MFX:SPEC:C3:X:PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - MFX:SPEC:C3:X:PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - MFX:SPEC:C3:X:PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - MFX:SPEC:C3:X:PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - MFX:SPEC:C3:X:PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - MFX:SPEC:C3:X:PLC:sName_RBV - waveform - PLC program name - | io: input * - MFX:SPEC:C3:ROT:PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:ROT:PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:ROT:PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:ROT:PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:ROT:PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:ROT:PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:ROT:PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C3:ROT:PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C3:ROT:PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:ROT:PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - MFX:SPEC:C3:ROT:PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C3:ROT:PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C3:ROT:PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:ROT:PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:ROT:PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:ROT:PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:ROT:PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:ROT:PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - MFX:SPEC:C3:ROT:PLC:bHomeCmd - bo - Start the homing routine - | io: output * - MFX:SPEC:C3:ROT:PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - MFX:SPEC:C3:ROT:PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:ROT:PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:ROT:PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - MFX:SPEC:C3:ROT:PLC:bMoveCmd - bo - Start a move - | io: output * - MFX:SPEC:C3:ROT:PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:ROT:PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C3:ROT:PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C3:ROT:PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:ROT:PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:C3:ROT:PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:C3:ROT:PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:C3:ROT:PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:C3:ROT:PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:C3:ROT:PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:C3:ROT:PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:C3:ROT:PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:C3:ROT:PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - MFX:SPEC:C3:ROT:PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:C3:ROT:PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:C3:ROT:PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:C3:ROT:PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:C3:ROT:PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - MFX:SPEC:C3:ROT:PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:C3:ROT:PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:C3:ROT:PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:C3:ROT:PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:C3:ROT:PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - MFX:SPEC:C3:ROT:PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - MFX:SPEC:C3:ROT:PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - MFX:SPEC:C3:ROT:PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - MFX:SPEC:C3:ROT:PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - MFX:SPEC:C3:ROT:PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - MFX:SPEC:C3:ROT:PLC:sName_RBV - waveform - PLC program name - | io: input * - MFX:SPEC:C3:TILT:PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:TILT:PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:TILT:PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:TILT:PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:TILT:PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:TILT:PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:TILT:PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C3:TILT:PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C3:TILT:PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:TILT:PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - MFX:SPEC:C3:TILT:PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C3:TILT:PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C3:TILT:PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:TILT:PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:TILT:PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:TILT:PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:TILT:PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:TILT:PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - MFX:SPEC:C3:TILT:PLC:bHomeCmd - bo - Start the homing routine - | io: output * - MFX:SPEC:C3:TILT:PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - MFX:SPEC:C3:TILT:PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:TILT:PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:TILT:PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - MFX:SPEC:C3:TILT:PLC:bMoveCmd - bo - Start a move - | io: output * - MFX:SPEC:C3:TILT:PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:TILT:PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C3:TILT:PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C3:TILT:PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C3:TILT:PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:C3:TILT:PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:C3:TILT:PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:C3:TILT:PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:C3:TILT:PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:C3:TILT:PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:C3:TILT:PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:C3:TILT:PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:C3:TILT:PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - MFX:SPEC:C3:TILT:PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:C3:TILT:PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:C3:TILT:PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:C3:TILT:PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:C3:TILT:PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - MFX:SPEC:C3:TILT:PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:C3:TILT:PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:C3:TILT:PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:C3:TILT:PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:C3:TILT:PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - MFX:SPEC:C3:TILT:PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - MFX:SPEC:C3:TILT:PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - MFX:SPEC:C3:TILT:PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - MFX:SPEC:C3:TILT:PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - MFX:SPEC:C3:TILT:PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - MFX:SPEC:C3:TILT:PLC:sName_RBV - waveform - PLC program name - | io: input * - MFX:SPEC:C4:X:PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:X:PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:X:PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:X:PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:X:PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:X:PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:X:PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C4:X:PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C4:X:PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:X:PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - MFX:SPEC:C4:X:PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C4:X:PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C4:X:PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:X:PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:X:PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:X:PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:X:PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:X:PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - MFX:SPEC:C4:X:PLC:bHomeCmd - bo - Start the homing routine - | io: output * - MFX:SPEC:C4:X:PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - MFX:SPEC:C4:X:PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:X:PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:X:PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - MFX:SPEC:C4:X:PLC:bMoveCmd - bo - Start a move - | io: output * - MFX:SPEC:C4:X:PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:X:PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C4:X:PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C4:X:PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:X:PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:C4:X:PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:C4:X:PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:C4:X:PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:C4:X:PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:C4:X:PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:C4:X:PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:C4:X:PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:C4:X:PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - MFX:SPEC:C4:X:PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:C4:X:PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:C4:X:PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:C4:X:PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:C4:X:PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - MFX:SPEC:C4:X:PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:C4:X:PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:C4:X:PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:C4:X:PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:C4:X:PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - MFX:SPEC:C4:X:PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - MFX:SPEC:C4:X:PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - MFX:SPEC:C4:X:PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - MFX:SPEC:C4:X:PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - MFX:SPEC:C4:X:PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - MFX:SPEC:C4:X:PLC:sName_RBV - waveform - PLC program name - | io: input * - MFX:SPEC:C4:ROT:PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:ROT:PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:ROT:PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:ROT:PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:ROT:PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:ROT:PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:ROT:PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C4:ROT:PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C4:ROT:PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:ROT:PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - MFX:SPEC:C4:ROT:PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C4:ROT:PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C4:ROT:PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:ROT:PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:ROT:PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:ROT:PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:ROT:PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:ROT:PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - MFX:SPEC:C4:ROT:PLC:bHomeCmd - bo - Start the homing routine - | io: output * - MFX:SPEC:C4:ROT:PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - MFX:SPEC:C4:ROT:PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:ROT:PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:ROT:PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - MFX:SPEC:C4:ROT:PLC:bMoveCmd - bo - Start a move - | io: output * - MFX:SPEC:C4:ROT:PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:ROT:PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C4:ROT:PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C4:ROT:PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:ROT:PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:C4:ROT:PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:C4:ROT:PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:C4:ROT:PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:C4:ROT:PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:C4:ROT:PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:C4:ROT:PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:C4:ROT:PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:C4:ROT:PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - MFX:SPEC:C4:ROT:PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:C4:ROT:PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:C4:ROT:PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:C4:ROT:PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:C4:ROT:PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - MFX:SPEC:C4:ROT:PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:C4:ROT:PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:C4:ROT:PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:C4:ROT:PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:C4:ROT:PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - MFX:SPEC:C4:ROT:PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - MFX:SPEC:C4:ROT:PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - MFX:SPEC:C4:ROT:PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - MFX:SPEC:C4:ROT:PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - MFX:SPEC:C4:ROT:PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - MFX:SPEC:C4:ROT:PLC:sName_RBV - waveform - PLC program name - | io: input * - MFX:SPEC:C4:TILT:PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:TILT:PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:TILT:PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:TILT:PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:TILT:PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:TILT:PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:TILT:PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C4:TILT:PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C4:TILT:PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:TILT:PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - MFX:SPEC:C4:TILT:PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C4:TILT:PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C4:TILT:PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:TILT:PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:TILT:PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:TILT:PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:TILT:PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:TILT:PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - MFX:SPEC:C4:TILT:PLC:bHomeCmd - bo - Start the homing routine - | io: output * - MFX:SPEC:C4:TILT:PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - MFX:SPEC:C4:TILT:PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:TILT:PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:TILT:PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - MFX:SPEC:C4:TILT:PLC:bMoveCmd - bo - Start a move - | io: output * - MFX:SPEC:C4:TILT:PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:TILT:PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C4:TILT:PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C4:TILT:PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C4:TILT:PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:C4:TILT:PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:C4:TILT:PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:C4:TILT:PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:C4:TILT:PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:C4:TILT:PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:C4:TILT:PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:C4:TILT:PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:C4:TILT:PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - MFX:SPEC:C4:TILT:PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:C4:TILT:PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:C4:TILT:PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:C4:TILT:PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:C4:TILT:PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - MFX:SPEC:C4:TILT:PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:C4:TILT:PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:C4:TILT:PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:C4:TILT:PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:C4:TILT:PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - MFX:SPEC:C4:TILT:PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - MFX:SPEC:C4:TILT:PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - MFX:SPEC:C4:TILT:PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - MFX:SPEC:C4:TILT:PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - MFX:SPEC:C4:TILT:PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - MFX:SPEC:C4:TILT:PLC:sName_RBV - waveform - PLC program name - | io: input * - MFX:SPEC:C5:X:PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:X:PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:X:PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:X:PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:X:PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:X:PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:X:PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C5:X:PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C5:X:PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:X:PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - MFX:SPEC:C5:X:PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C5:X:PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C5:X:PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:X:PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:X:PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:X:PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:X:PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:X:PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - MFX:SPEC:C5:X:PLC:bHomeCmd - bo - Start the homing routine - | io: output * - MFX:SPEC:C5:X:PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - MFX:SPEC:C5:X:PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:X:PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:X:PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - MFX:SPEC:C5:X:PLC:bMoveCmd - bo - Start a move - | io: output * - MFX:SPEC:C5:X:PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:X:PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C5:X:PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C5:X:PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:X:PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:C5:X:PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:C5:X:PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:C5:X:PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:C5:X:PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:C5:X:PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:C5:X:PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:C5:X:PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:C5:X:PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - MFX:SPEC:C5:X:PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:C5:X:PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:C5:X:PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:C5:X:PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:C5:X:PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - MFX:SPEC:C5:X:PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:C5:X:PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:C5:X:PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:C5:X:PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:C5:X:PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - MFX:SPEC:C5:X:PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - MFX:SPEC:C5:X:PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - MFX:SPEC:C5:X:PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - MFX:SPEC:C5:X:PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - MFX:SPEC:C5:X:PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - MFX:SPEC:C5:X:PLC:sName_RBV - waveform - PLC program name - | io: input * - MFX:SPEC:C5:ROT:PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:ROT:PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:ROT:PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:ROT:PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:ROT:PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:ROT:PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:ROT:PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C5:ROT:PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C5:ROT:PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:ROT:PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - MFX:SPEC:C5:ROT:PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C5:ROT:PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C5:ROT:PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:ROT:PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:ROT:PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:ROT:PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:ROT:PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:ROT:PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - MFX:SPEC:C5:ROT:PLC:bHomeCmd - bo - Start the homing routine - | io: output * - MFX:SPEC:C5:ROT:PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - MFX:SPEC:C5:ROT:PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:ROT:PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:ROT:PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - MFX:SPEC:C5:ROT:PLC:bMoveCmd - bo - Start a move - | io: output * - MFX:SPEC:C5:ROT:PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:ROT:PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C5:ROT:PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C5:ROT:PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:ROT:PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:C5:ROT:PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:C5:ROT:PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:C5:ROT:PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:C5:ROT:PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:C5:ROT:PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:C5:ROT:PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:C5:ROT:PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:C5:ROT:PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - MFX:SPEC:C5:ROT:PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:C5:ROT:PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:C5:ROT:PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:C5:ROT:PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:C5:ROT:PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - MFX:SPEC:C5:ROT:PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:C5:ROT:PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:C5:ROT:PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:C5:ROT:PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:C5:ROT:PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - MFX:SPEC:C5:ROT:PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - MFX:SPEC:C5:ROT:PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - MFX:SPEC:C5:ROT:PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - MFX:SPEC:C5:ROT:PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - MFX:SPEC:C5:ROT:PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - MFX:SPEC:C5:ROT:PLC:sName_RBV - waveform - PLC program name - | io: input * - MFX:SPEC:C5:TILT:PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:TILT:PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:TILT:PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:TILT:PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:TILT:PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:TILT:PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:TILT:PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C5:TILT:PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C5:TILT:PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:TILT:PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - MFX:SPEC:C5:TILT:PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C5:TILT:PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C5:TILT:PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:TILT:PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:TILT:PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:TILT:PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:TILT:PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:TILT:PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - MFX:SPEC:C5:TILT:PLC:bHomeCmd - bo - Start the homing routine - | io: output * - MFX:SPEC:C5:TILT:PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - MFX:SPEC:C5:TILT:PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:TILT:PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:TILT:PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - MFX:SPEC:C5:TILT:PLC:bMoveCmd - bo - Start a move - | io: output * - MFX:SPEC:C5:TILT:PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:TILT:PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C5:TILT:PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C5:TILT:PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C5:TILT:PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:C5:TILT:PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:C5:TILT:PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:C5:TILT:PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:C5:TILT:PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:C5:TILT:PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:C5:TILT:PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:C5:TILT:PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:C5:TILT:PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - MFX:SPEC:C5:TILT:PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:C5:TILT:PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:C5:TILT:PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:C5:TILT:PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:C5:TILT:PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - MFX:SPEC:C5:TILT:PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:C5:TILT:PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:C5:TILT:PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:C5:TILT:PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:C5:TILT:PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - MFX:SPEC:C5:TILT:PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - MFX:SPEC:C5:TILT:PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - MFX:SPEC:C5:TILT:PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - MFX:SPEC:C5:TILT:PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - MFX:SPEC:C5:TILT:PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - MFX:SPEC:C5:TILT:PLC:sName_RBV - waveform - PLC program name - | io: input * - MFX:LIB:MMS:01:PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:01:PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:01:PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:01:PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:01:PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:01:PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:01:PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LIB:MMS:01:PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LIB:MMS:01:PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:01:PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - MFX:LIB:MMS:01:PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LIB:MMS:01:PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LIB:MMS:01:PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:01:PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:01:PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:01:PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:01:PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:01:PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - MFX:LIB:MMS:01:PLC:bHomeCmd - bo - Start the homing routine - | io: output * - MFX:LIB:MMS:01:PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - MFX:LIB:MMS:01:PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:01:PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:01:PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - MFX:LIB:MMS:01:PLC:bMoveCmd - bo - Start a move - | io: output * - MFX:LIB:MMS:01:PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:01:PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LIB:MMS:01:PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LIB:MMS:01:PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:01:PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:LIB:MMS:01:PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:LIB:MMS:01:PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - MFX:LIB:MMS:01:PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - MFX:LIB:MMS:01:PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - MFX:LIB:MMS:01:PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - MFX:LIB:MMS:01:PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - MFX:LIB:MMS:01:PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - MFX:LIB:MMS:01:PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - MFX:LIB:MMS:01:PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - MFX:LIB:MMS:01:PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - MFX:LIB:MMS:01:PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - MFX:LIB:MMS:01:PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - MFX:LIB:MMS:01:PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - MFX:LIB:MMS:01:PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - MFX:LIB:MMS:01:PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - MFX:LIB:MMS:01:PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - MFX:LIB:MMS:01:PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - MFX:LIB:MMS:01:PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - MFX:LIB:MMS:01:PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - MFX:LIB:MMS:01:PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - MFX:LIB:MMS:01:PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - MFX:LIB:MMS:01:PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - MFX:LIB:MMS:01:PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - MFX:LIB:MMS:01:PLC:sName_RBV - waveform - PLC program name - | io: input * - MFX:SPEC:C6:X:PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:X:PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:X:PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:X:PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:X:PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:X:PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:X:PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C6:X:PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C6:X:PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:X:PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - MFX:SPEC:C6:X:PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C6:X:PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C6:X:PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:X:PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:X:PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:X:PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:X:PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:X:PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - MFX:SPEC:C6:X:PLC:bHomeCmd - bo - Start the homing routine - | io: output * - MFX:SPEC:C6:X:PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - MFX:SPEC:C6:X:PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:X:PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:X:PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - MFX:SPEC:C6:X:PLC:bMoveCmd - bo - Start a move - | io: output * - MFX:SPEC:C6:X:PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:X:PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C6:X:PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C6:X:PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:X:PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:C6:X:PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:C6:X:PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:C6:X:PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:C6:X:PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:C6:X:PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:C6:X:PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:C6:X:PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:C6:X:PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - MFX:SPEC:C6:X:PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:C6:X:PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:C6:X:PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:C6:X:PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:C6:X:PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - MFX:SPEC:C6:X:PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:C6:X:PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:C6:X:PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:C6:X:PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:C6:X:PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - MFX:SPEC:C6:X:PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - MFX:SPEC:C6:X:PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - MFX:SPEC:C6:X:PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - MFX:SPEC:C6:X:PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - MFX:SPEC:C6:X:PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - MFX:SPEC:C6:X:PLC:sName_RBV - waveform - PLC program name - | io: input * - MFX:SPEC:C6:ROT:PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:ROT:PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:ROT:PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:ROT:PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:ROT:PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:ROT:PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:ROT:PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C6:ROT:PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C6:ROT:PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:ROT:PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - MFX:SPEC:C6:ROT:PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C6:ROT:PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C6:ROT:PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:ROT:PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:ROT:PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:ROT:PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:ROT:PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:ROT:PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - MFX:SPEC:C6:ROT:PLC:bHomeCmd - bo - Start the homing routine - | io: output * - MFX:SPEC:C6:ROT:PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - MFX:SPEC:C6:ROT:PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:ROT:PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:ROT:PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - MFX:SPEC:C6:ROT:PLC:bMoveCmd - bo - Start a move - | io: output * - MFX:SPEC:C6:ROT:PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:ROT:PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C6:ROT:PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C6:ROT:PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:ROT:PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:C6:ROT:PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:C6:ROT:PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:C6:ROT:PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:C6:ROT:PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:C6:ROT:PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:C6:ROT:PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:C6:ROT:PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:C6:ROT:PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - MFX:SPEC:C6:ROT:PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:C6:ROT:PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:C6:ROT:PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:C6:ROT:PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:C6:ROT:PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - MFX:SPEC:C6:ROT:PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:C6:ROT:PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:C6:ROT:PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:C6:ROT:PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:C6:ROT:PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - MFX:SPEC:C6:ROT:PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - MFX:SPEC:C6:ROT:PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - MFX:SPEC:C6:ROT:PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - MFX:SPEC:C6:ROT:PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - MFX:SPEC:C6:ROT:PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - MFX:SPEC:C6:ROT:PLC:sName_RBV - waveform - PLC program name - | io: input * - MFX:SPEC:C6:TILT:PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:TILT:PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:TILT:PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:TILT:PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:TILT:PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:TILT:PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:TILT:PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C6:TILT:PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C6:TILT:PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:TILT:PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - MFX:SPEC:C6:TILT:PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C6:TILT:PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C6:TILT:PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:TILT:PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:TILT:PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:TILT:PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:TILT:PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:TILT:PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - MFX:SPEC:C6:TILT:PLC:bHomeCmd - bo - Start the homing routine - | io: output * - MFX:SPEC:C6:TILT:PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - MFX:SPEC:C6:TILT:PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:TILT:PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:TILT:PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - MFX:SPEC:C6:TILT:PLC:bMoveCmd - bo - Start a move - | io: output * - MFX:SPEC:C6:TILT:PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:TILT:PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C6:TILT:PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:C6:TILT:PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:C6:TILT:PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:C6:TILT:PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:C6:TILT:PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:C6:TILT:PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:C6:TILT:PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:C6:TILT:PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:C6:TILT:PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:C6:TILT:PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:C6:TILT:PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - MFX:SPEC:C6:TILT:PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:C6:TILT:PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:C6:TILT:PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:C6:TILT:PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:C6:TILT:PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - MFX:SPEC:C6:TILT:PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:C6:TILT:PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:C6:TILT:PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:C6:TILT:PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:C6:TILT:PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - MFX:SPEC:C6:TILT:PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - MFX:SPEC:C6:TILT:PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - MFX:SPEC:C6:TILT:PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - MFX:SPEC:C6:TILT:PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - MFX:SPEC:C6:TILT:PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - MFX:SPEC:C6:TILT:PLC:sName_RBV - waveform - PLC program name - | io: input * - MFX:SPEC:T1:PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T1:PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T1:PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T1:PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T1:PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T1:PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T1:PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:T1:PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:T1:PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T1:PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - MFX:SPEC:T1:PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:T1:PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:T1:PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T1:PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T1:PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T1:PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T1:PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T1:PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - MFX:SPEC:T1:PLC:bHomeCmd - bo - Start the homing routine - | io: output * - MFX:SPEC:T1:PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - MFX:SPEC:T1:PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T1:PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T1:PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - MFX:SPEC:T1:PLC:bMoveCmd - bo - Start a move - | io: output * - MFX:SPEC:T1:PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T1:PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:T1:PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:T1:PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T1:PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:T1:PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:T1:PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:T1:PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:T1:PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:T1:PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:T1:PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:T1:PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:T1:PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - MFX:SPEC:T1:PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:T1:PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:T1:PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:T1:PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:T1:PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - MFX:SPEC:T1:PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:T1:PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:T1:PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:T1:PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:T1:PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - MFX:SPEC:T1:PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - MFX:SPEC:T1:PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - MFX:SPEC:T1:PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - MFX:SPEC:T1:PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - MFX:SPEC:T1:PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - MFX:SPEC:T1:PLC:sName_RBV - waveform - PLC program name - | io: input * - MFX:SPEC:T2:PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T2:PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T2:PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T2:PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T2:PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T2:PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T2:PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:T2:PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:T2:PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T2:PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - MFX:SPEC:T2:PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:T2:PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:T2:PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T2:PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T2:PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T2:PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T2:PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T2:PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - MFX:SPEC:T2:PLC:bHomeCmd - bo - Start the homing routine - | io: output * - MFX:SPEC:T2:PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - MFX:SPEC:T2:PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T2:PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T2:PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - MFX:SPEC:T2:PLC:bMoveCmd - bo - Start a move - | io: output * - MFX:SPEC:T2:PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T2:PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:T2:PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:T2:PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T2:PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:T2:PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:T2:PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:T2:PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:T2:PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:T2:PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:T2:PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:T2:PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:T2:PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - MFX:SPEC:T2:PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:T2:PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:T2:PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:T2:PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:T2:PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - MFX:SPEC:T2:PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:T2:PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:T2:PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:T2:PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:T2:PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - MFX:SPEC:T2:PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - MFX:SPEC:T2:PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - MFX:SPEC:T2:PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - MFX:SPEC:T2:PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - MFX:SPEC:T2:PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - MFX:SPEC:T2:PLC:sName_RBV - waveform - PLC program name - | io: input * - MFX:SPEC:T3:PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T3:PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T3:PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T3:PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T3:PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T3:PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T3:PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:T3:PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:T3:PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T3:PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - MFX:SPEC:T3:PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:T3:PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:T3:PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T3:PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T3:PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T3:PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T3:PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T3:PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - MFX:SPEC:T3:PLC:bHomeCmd - bo - Start the homing routine - | io: output * - MFX:SPEC:T3:PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - MFX:SPEC:T3:PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T3:PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T3:PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - MFX:SPEC:T3:PLC:bMoveCmd - bo - Start a move - | io: output * - MFX:SPEC:T3:PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T3:PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:T3:PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:T3:PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:T3:PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:T3:PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:T3:PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:T3:PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:T3:PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:T3:PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:T3:PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:T3:PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:T3:PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - MFX:SPEC:T3:PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:T3:PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:T3:PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:T3:PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:T3:PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - MFX:SPEC:T3:PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:T3:PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:T3:PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:T3:PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:T3:PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - MFX:SPEC:T3:PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - MFX:SPEC:T3:PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - MFX:SPEC:T3:PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - MFX:SPEC:T3:PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - MFX:SPEC:T3:PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - MFX:SPEC:T3:PLC:sName_RBV - waveform - PLC program name - | io: input * - MFX:SPEC:ROT:PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:ROT:PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:ROT:PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:ROT:PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:ROT:PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:ROT:PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:ROT:PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:ROT:PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:ROT:PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:ROT:PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - MFX:SPEC:ROT:PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:ROT:PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:ROT:PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:ROT:PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:ROT:PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:ROT:PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:ROT:PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:ROT:PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - MFX:SPEC:ROT:PLC:bHomeCmd - bo - Start the homing routine - | io: output * - MFX:SPEC:ROT:PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - MFX:SPEC:ROT:PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:ROT:PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:ROT:PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - MFX:SPEC:ROT:PLC:bMoveCmd - bo - Start a move - | io: output * - MFX:SPEC:ROT:PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:ROT:PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:ROT:PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:SPEC:ROT:PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:SPEC:ROT:PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:ROT:PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:SPEC:ROT:PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:ROT:PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - MFX:SPEC:ROT:PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:ROT:PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - MFX:SPEC:ROT:PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:ROT:PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - MFX:SPEC:ROT:PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - MFX:SPEC:ROT:PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:ROT:PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - MFX:SPEC:ROT:PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:ROT:PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - MFX:SPEC:ROT:PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - MFX:SPEC:ROT:PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:ROT:PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - MFX:SPEC:ROT:PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:ROT:PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - MFX:SPEC:ROT:PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - MFX:SPEC:ROT:PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - MFX:SPEC:ROT:PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - MFX:SPEC:ROT:PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - MFX:SPEC:ROT:PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - MFX:SPEC:ROT:PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - MFX:SPEC:ROT:PLC:sName_RBV - waveform - PLC program name - | io: input * - MFX:LIB:MMS:05:PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:05:PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:05:PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:05:PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:05:PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:05:PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:05:PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LIB:MMS:05:PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LIB:MMS:05:PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:05:PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - MFX:LIB:MMS:05:PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LIB:MMS:05:PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LIB:MMS:05:PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:05:PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:05:PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:05:PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:05:PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:05:PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - MFX:LIB:MMS:05:PLC:bHomeCmd - bo - Start the homing routine - | io: output * - MFX:LIB:MMS:05:PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - MFX:LIB:MMS:05:PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:05:PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:05:PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - MFX:LIB:MMS:05:PLC:bMoveCmd - bo - Start a move - | io: output * - MFX:LIB:MMS:05:PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:05:PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LIB:MMS:05:PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LIB:MMS:05:PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:05:PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:LIB:MMS:05:PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:LIB:MMS:05:PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - MFX:LIB:MMS:05:PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - MFX:LIB:MMS:05:PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - MFX:LIB:MMS:05:PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - MFX:LIB:MMS:05:PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - MFX:LIB:MMS:05:PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - MFX:LIB:MMS:05:PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - MFX:LIB:MMS:05:PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - MFX:LIB:MMS:05:PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - MFX:LIB:MMS:05:PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - MFX:LIB:MMS:05:PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - MFX:LIB:MMS:05:PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - MFX:LIB:MMS:05:PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - MFX:LIB:MMS:05:PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - MFX:LIB:MMS:05:PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - MFX:LIB:MMS:05:PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - MFX:LIB:MMS:05:PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - MFX:LIB:MMS:05:PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - MFX:LIB:MMS:05:PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - MFX:LIB:MMS:05:PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - MFX:LIB:MMS:05:PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - MFX:LIB:MMS:05:PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - MFX:LIB:MMS:05:PLC:sName_RBV - waveform - PLC program name - | io: input * - MFX:LIB:MMS:02:PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:02:PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:02:PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:02:PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:02:PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:02:PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:02:PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LIB:MMS:02:PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LIB:MMS:02:PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:02:PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - MFX:LIB:MMS:02:PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LIB:MMS:02:PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LIB:MMS:02:PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:02:PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:02:PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:02:PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:02:PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:02:PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - MFX:LIB:MMS:02:PLC:bHomeCmd - bo - Start the homing routine - | io: output * - MFX:LIB:MMS:02:PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - MFX:LIB:MMS:02:PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:02:PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:02:PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - MFX:LIB:MMS:02:PLC:bMoveCmd - bo - Start a move - | io: output * - MFX:LIB:MMS:02:PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:02:PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LIB:MMS:02:PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LIB:MMS:02:PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:02:PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:LIB:MMS:02:PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:LIB:MMS:02:PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - MFX:LIB:MMS:02:PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - MFX:LIB:MMS:02:PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - MFX:LIB:MMS:02:PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - MFX:LIB:MMS:02:PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - MFX:LIB:MMS:02:PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - MFX:LIB:MMS:02:PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - MFX:LIB:MMS:02:PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - MFX:LIB:MMS:02:PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - MFX:LIB:MMS:02:PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - MFX:LIB:MMS:02:PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - MFX:LIB:MMS:02:PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - MFX:LIB:MMS:02:PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - MFX:LIB:MMS:02:PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - MFX:LIB:MMS:02:PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - MFX:LIB:MMS:02:PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - MFX:LIB:MMS:02:PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - MFX:LIB:MMS:02:PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - MFX:LIB:MMS:02:PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - MFX:LIB:MMS:02:PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - MFX:LIB:MMS:02:PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - MFX:LIB:MMS:02:PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - MFX:LIB:MMS:02:PLC:sName_RBV - waveform - PLC program name - | io: input * - MFX:LIB:MMS:03:PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:03:PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:03:PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:03:PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:03:PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:03:PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:03:PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LIB:MMS:03:PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LIB:MMS:03:PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:03:PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - MFX:LIB:MMS:03:PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LIB:MMS:03:PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LIB:MMS:03:PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:03:PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:03:PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:03:PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:03:PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:03:PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - MFX:LIB:MMS:03:PLC:bHomeCmd - bo - Start the homing routine - | io: output * - MFX:LIB:MMS:03:PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - MFX:LIB:MMS:03:PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:03:PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:03:PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - MFX:LIB:MMS:03:PLC:bMoveCmd - bo - Start a move - | io: output * - MFX:LIB:MMS:03:PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:03:PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LIB:MMS:03:PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LIB:MMS:03:PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:03:PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:LIB:MMS:03:PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:LIB:MMS:03:PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - MFX:LIB:MMS:03:PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - MFX:LIB:MMS:03:PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - MFX:LIB:MMS:03:PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - MFX:LIB:MMS:03:PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - MFX:LIB:MMS:03:PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - MFX:LIB:MMS:03:PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - MFX:LIB:MMS:03:PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - MFX:LIB:MMS:03:PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - MFX:LIB:MMS:03:PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - MFX:LIB:MMS:03:PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - MFX:LIB:MMS:03:PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - MFX:LIB:MMS:03:PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - MFX:LIB:MMS:03:PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - MFX:LIB:MMS:03:PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - MFX:LIB:MMS:03:PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - MFX:LIB:MMS:03:PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - MFX:LIB:MMS:03:PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - MFX:LIB:MMS:03:PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - MFX:LIB:MMS:03:PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - MFX:LIB:MMS:03:PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - MFX:LIB:MMS:03:PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - MFX:LIB:MMS:03:PLC:sName_RBV - waveform - PLC program name - | io: input * - MFX:LIB:MMS:04:PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:04:PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:04:PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:04:PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:04:PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:04:PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:04:PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LIB:MMS:04:PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LIB:MMS:04:PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:04:PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - MFX:LIB:MMS:04:PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LIB:MMS:04:PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LIB:MMS:04:PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:04:PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:04:PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:04:PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:04:PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:04:PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - MFX:LIB:MMS:04:PLC:bHomeCmd - bo - Start the homing routine - | io: output * - MFX:LIB:MMS:04:PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - MFX:LIB:MMS:04:PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:04:PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:04:PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - MFX:LIB:MMS:04:PLC:bMoveCmd - bo - Start a move - | io: output * - MFX:LIB:MMS:04:PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:04:PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LIB:MMS:04:PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LIB:MMS:04:PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LIB:MMS:04:PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:LIB:MMS:04:PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:LIB:MMS:04:PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - MFX:LIB:MMS:04:PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - MFX:LIB:MMS:04:PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - MFX:LIB:MMS:04:PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - MFX:LIB:MMS:04:PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - MFX:LIB:MMS:04:PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - MFX:LIB:MMS:04:PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - MFX:LIB:MMS:04:PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - MFX:LIB:MMS:04:PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - MFX:LIB:MMS:04:PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - MFX:LIB:MMS:04:PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - MFX:LIB:MMS:04:PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - MFX:LIB:MMS:04:PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - MFX:LIB:MMS:04:PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - MFX:LIB:MMS:04:PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - MFX:LIB:MMS:04:PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - MFX:LIB:MMS:04:PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - MFX:LIB:MMS:04:PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - MFX:LIB:MMS:04:PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - MFX:LIB:MMS:04:PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - MFX:LIB:MMS:04:PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - MFX:LIB:MMS:04:PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - MFX:LIB:MMS:04:PLC:sName_RBV - waveform - PLC program name - | io: input * - MFX:LJH:JET:X:PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:X:PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:X:PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:X:PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:X:PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:X:PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:X:PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:JET:X:PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:JET:X:PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:X:PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - MFX:LJH:JET:X:PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:JET:X:PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:JET:X:PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:X:PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:X:PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:X:PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:X:PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:X:PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - MFX:LJH:JET:X:PLC:bHomeCmd - bo - Start the homing routine - | io: output * - MFX:LJH:JET:X:PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - MFX:LJH:JET:X:PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:X:PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:X:PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - MFX:LJH:JET:X:PLC:bMoveCmd - bo - Start a move - | io: output * - MFX:LJH:JET:X:PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:X:PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:JET:X:PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:JET:X:PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:X:PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:LJH:JET:X:PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:LJH:JET:X:PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - MFX:LJH:JET:X:PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - MFX:LJH:JET:X:PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - MFX:LJH:JET:X:PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - MFX:LJH:JET:X:PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - MFX:LJH:JET:X:PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - MFX:LJH:JET:X:PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - MFX:LJH:JET:X:PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - MFX:LJH:JET:X:PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - MFX:LJH:JET:X:PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - MFX:LJH:JET:X:PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - MFX:LJH:JET:X:PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - MFX:LJH:JET:X:PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - MFX:LJH:JET:X:PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - MFX:LJH:JET:X:PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - MFX:LJH:JET:X:PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - MFX:LJH:JET:X:PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - MFX:LJH:JET:X:PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - MFX:LJH:JET:X:PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - MFX:LJH:JET:X:PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - MFX:LJH:JET:X:PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - MFX:LJH:JET:X:PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - MFX:LJH:JET:X:PLC:sName_RBV - waveform - PLC program name - | io: input * - MFX:LJH:JET:Y:PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:Y:PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:Y:PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:Y:PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:Y:PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:Y:PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:Y:PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:JET:Y:PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:JET:Y:PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:Y:PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - MFX:LJH:JET:Y:PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:JET:Y:PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:JET:Y:PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:Y:PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:Y:PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:Y:PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:Y:PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:Y:PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - MFX:LJH:JET:Y:PLC:bHomeCmd - bo - Start the homing routine - | io: output * - MFX:LJH:JET:Y:PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - MFX:LJH:JET:Y:PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:Y:PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:Y:PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - MFX:LJH:JET:Y:PLC:bMoveCmd - bo - Start a move - | io: output * - MFX:LJH:JET:Y:PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:Y:PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:JET:Y:PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:JET:Y:PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:Y:PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:LJH:JET:Y:PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:LJH:JET:Y:PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - MFX:LJH:JET:Y:PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - MFX:LJH:JET:Y:PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - MFX:LJH:JET:Y:PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - MFX:LJH:JET:Y:PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - MFX:LJH:JET:Y:PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - MFX:LJH:JET:Y:PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - MFX:LJH:JET:Y:PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - MFX:LJH:JET:Y:PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - MFX:LJH:JET:Y:PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - MFX:LJH:JET:Y:PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - MFX:LJH:JET:Y:PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - MFX:LJH:JET:Y:PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - MFX:LJH:JET:Y:PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - MFX:LJH:JET:Y:PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - MFX:LJH:JET:Y:PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - MFX:LJH:JET:Y:PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - MFX:LJH:JET:Y:PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - MFX:LJH:JET:Y:PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - MFX:LJH:JET:Y:PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - MFX:LJH:JET:Y:PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - MFX:LJH:JET:Y:PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - MFX:LJH:JET:Y:PLC:sName_RBV - waveform - PLC program name - | io: input * - MFX:LJH:JET:Z:PLC:bAllBackwardEnable_RBV - bi - Summary of axis permission to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:Z:PLC:bAllEnable_RBV - bi - Summary of axis permission to have power - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:Z:PLC:bAllForwardEnable_RBV - bi - Summary of axis permission to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:Z:PLC:bBrakeRelease_RBV - bi - TRUE if brake released - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:Z:PLC:bBusy_RBV - bi - TRUE if in the middle of a command - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:Z:PLC:bDone_RBV - bi - TRUE if command finished successfully - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:Z:PLC:bEnable_RBV - bi - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:JET:Z:PLC:bEnable - bo - Used internally to request enables - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:JET:Z:PLC:bEnableDone_RBV - bi - TRUE if done enabling - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:Z:PLC:bError_RBV - bi - TRUE if we are in an error state - | field: ONAM TRUE | field: ZNAM FALSE | io: input | update: 100hz notify * - MFX:LJH:JET:Z:PLC:bExecute_RBV - bi - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:JET:Z:PLC:bExecute - bo - Used internally and by the IOC to start or stop - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:JET:Z:PLC:bGantryAxis_RBV - bi - TRUE if gantry EPS active - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:Z:PLC:bGantryBackwardEnable_RBV - bi - TRUE if gantry ok to move backward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:Z:PLC:bGantryForwardEnable_RBV - bi - TRUE if gantry ok to move forward - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:Z:PLC:bHardwareEnable_RBV - bi - TRUE if STO not hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:Z:PLC:bHome_RBV - bi - TRUE if at homing switch - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:Z:PLC:bHomeCmd_RBV - bi - Start the homing routine - | io: output * - MFX:LJH:JET:Z:PLC:bHomeCmd - bo - Start the homing routine - | io: output * - MFX:LJH:JET:Z:PLC:bHomed_RBV - bi - TRUE if the motor has been homed - | io: input * - MFX:LJH:JET:Z:PLC:bLimitBackwardEnable_RBV - bi - FALSE if reverse limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:Z:PLC:bLimitForwardEnable_RBV - bi - FALSE if forward limit hit - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:Z:PLC:bMoveCmd_RBV - bi - Start a move - | io: output * - MFX:LJH:JET:Z:PLC:bMoveCmd - bo - Start a move - | io: output * - MFX:LJH:JET:Z:PLC:bPowerSelf_RBV - bi - FALSE if axis is in PMPS - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:Z:PLC:bReset_RBV - bi - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:JET:Z:PLC:bReset - bo - Used internally to reset errors - | field: ONAM TRUE | field: ZNAM FALSE | io: output * - MFX:LJH:JET:Z:PLC:bSafetyReady_RBV - bi - TRUE if safe to start a move - | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:LJH:JET:Z:PLC:bUserEnable_RBV - bi - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:LJH:JET:Z:PLC:bUserEnable - bo - Used to disable power entirely for an axis - | field: ONAM ENABLE | field: ZNAM DISABLE | io: output * - MFX:LJH:JET:Z:PLC:fAcceleration_RBV - ai - Used internally and by the IOC to set acceleration - | io: output * - MFX:LJH:JET:Z:PLC:fAcceleration - ao - Used internally and by the IOC to set acceleration - | io: output * - MFX:LJH:JET:Z:PLC:fDeceleration_RBV - ai - Used internally and by the IOC to set deceleration - | io: output * - MFX:LJH:JET:Z:PLC:fDeceleration - ao - Used internally and by the IOC to set deceleration - | io: output * - MFX:LJH:JET:Z:PLC:fHomePosition_RBV - ai - Used internally and by the IOC to pick home position - | io: output * - MFX:LJH:JET:Z:PLC:fHomePosition - ao - Used internally and by the IOC to pick home position - | io: output * - MFX:LJH:JET:Z:PLC:fPosDiff_RBV - ai - Position lag difference - | io: input * - MFX:LJH:JET:Z:PLC:fPosition_RBV - ai - Used internally and by the IOC as the set position - | io: output * - MFX:LJH:JET:Z:PLC:fPosition - ao - Used internally and by the IOC as the set position - | io: output * - MFX:LJH:JET:Z:PLC:fVelocity_RBV - ai - Used internally and by the IOC to set velocity - | io: output * - MFX:LJH:JET:Z:PLC:fVelocity - ao - Used internally and by the IOC to set velocity - | io: output * - MFX:LJH:JET:Z:PLC:nBrakeMode_RBV - mbbi - Describes when the brake will be released - | io: input * - MFX:LJH:JET:Z:PLC:nCmdData_RBV - longin - Used internally and by the IOC to pass extra args - | io: output * - MFX:LJH:JET:Z:PLC:nCmdData - longout - Used internally and by the IOC to pass extra args - | io: output * - MFX:LJH:JET:Z:PLC:nCommand_RBV - longin - Used internally and by the IOC to pick move type - | io: output * - MFX:LJH:JET:Z:PLC:nCommand - longout - Used internally and by the IOC to pick move type - | io: output * - MFX:LJH:JET:Z:PLC:nEnableMode_RBV - mbbi - Describes when the axis will automatically get power - | io: input * - MFX:LJH:JET:Z:PLC:nEncoderCount_RBV - longin - Count from encoder hardware - | io: input * - MFX:LJH:JET:Z:PLC:nErrorId_RBV - longin - Error code if nonzero - | io: input | update: 100hz notify * - MFX:LJH:JET:Z:PLC:nHomingMode_RBV - mbbi - Describes our homing strategy - | io: input * - MFX:LJH:JET:Z:PLC:nMotionAxisID_RBV - longin - Unique ID assigned to each axis in the NC - | io: input * - MFX:LJH:JET:Z:PLC:sErrorMessage_RBV - waveform - Message to identify the error state - | io: input | update: 100hz notify * - MFX:LJH:JET:Z:PLC:sName_RBV - waveform - PLC program name - | io: input * - $(PREFIX)AccumulatedFastFaults_RBV - longin - PMPS_GVL.AccumulatedFF - | io: input * - $(PREFIX)SuccessfulPreemptions_RBV - longin - PMPS_GVL.SuccessfulPreemption - | io: input * - $(PREFIX)0RateBeamCnst:Veto_RBV - waveform - 0-rate beam constant - | archive: 1s monitor | io: input * - $(PREFIX)0RateBeamCnst:Cohort_RBV - longin - Cohort inc on each arb cycle - | archive: 1s monitor | io: input * - $(PREFIX)0RateBeamCnst:Rate_RBV - longin - 0-rate beam constant - | archive: 1s monitor | field: EGU Hz | io: input * - $(PREFIX)0RateBeamCnst:Transmission_RBV - ai - 0-rate beam constant - | archive: 1s monitor | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX)0RateBeamCnst:PhotonEnergyRanges_RBV - longin - 0-rate beam constant - | archive: 1s monitor | field: EGU eV | io: input * - $(PREFIX)0RateBeamCnst:Valid_RBV - bi - 0-rate beam constant - | archive: 1s monitor | io: input * - $(PREFIX)FullBeamCnst:Veto_RBV - waveform - Full beam constant - | archive: 1s monitor | io: input * - $(PREFIX)FullBeamCnst:Cohort_RBV - longin - Cohort inc on each arb cycle - | archive: 1s monitor | io: input * - $(PREFIX)FullBeamCnst:Rate_RBV - longin - Full beam constant - | archive: 1s monitor | field: EGU Hz | io: input * - $(PREFIX)FullBeamCnst:Transmission_RBV - ai - Full beam constant - | archive: 1s monitor | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX)FullBeamCnst:PhotonEnergyRanges_RBV - longin - Full beam constant - | archive: 1s monitor | field: EGU eV | io: input * - $(PREFIX)FullBeamCnst:Valid_RBV - bi - Full beam constant - | archive: 1s monitor | io: input * - $(PREFIX)eVRangeCnst_RBV - waveform - Active eV Range constants - | archive: 1s monitor | field: EGU eV | io: input * - $(PREFIX)K:eVRangeCnst_RBV - waveform - eV Range constants - | archive: 1s monitor | field: EGU eV | io: input * - $(PREFIX)L:eVRangeCnst_RBV - waveform - eV Range constants - | archive: 1s monitor | field: EGU eV | io: input * - $(PREFIX)eVRangeHyst_RBV - ai - eV Range hystersis - | archive: 1s monitor | field: EGU eV | io: input * - $(PREFIX)CurrentBP:Veto_RBV - waveform - PMPS_GVL.stCurrentBeamParameters.aVetoDevices - | archive: 1s monitor | io: input * - $(PREFIX)CurrentBP:Cohort_RBV - longin - Cohort inc on each arb cycle - | archive: 1s monitor | io: input * - $(PREFIX)CurrentBP:Rate_RBV - longin - PMPS_GVL.stCurrentBeamParameters.nRate - | archive: 1s monitor | field: EGU Hz | io: input * - $(PREFIX)CurrentBP:Transmission_RBV - ai - PMPS_GVL.stCurrentBeamParameters.nTran - | archive: 1s monitor | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX)CurrentBP:PhotonEnergyRanges_RBV - longin - PMPS_GVL.stCurrentBeamParameters.neVRange - | archive: 1s monitor | field: EGU eV | io: input * - $(PREFIX)CurrentBP:Valid_RBV - bi - PMPS_GVL.stCurrentBeamParameters.xValid - | archive: 1s monitor | io: input * - $(PREFIX)RequestedBP:Veto_RBV - waveform - PMPS_GVL.stRequestedBeamParameters.aVetoDevices - | archive: 1s monitor | io: input * - $(PREFIX)RequestedBP:Cohort_RBV - longin - Cohort inc on each arb cycle - | archive: 1s monitor | io: input * - $(PREFIX)RequestedBP:Rate_RBV - longin - PMPS_GVL.stRequestedBeamParameters.nRate - | archive: 1s monitor | field: EGU Hz | io: input * - $(PREFIX)RequestedBP:Transmission_RBV - ai - PMPS_GVL.stRequestedBeamParameters.nTran - | archive: 1s monitor | field: HOPR 1 | field: LOPR 0 | field: PREC 2 | io: input * - $(PREFIX)RequestedBP:PhotonEnergyRanges_RBV - longin - PMPS_GVL.stRequestedBeamParameters.neVRange - | archive: 1s monitor | field: EGU eV | io: input * - $(PREFIX)RequestedBP:Valid_RBV - bi - PMPS_GVL.stRequestedBeamParameters.xValid - | archive: 1s monitor | io: input * - MFX:ATM:MMS:STATE:01:LOCKED_RBV - bi - TRUE if state is immutable - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:STATE:01:MOVE_OK_RBV - bi - TRUE if the move would be safe - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:STATE:01:VALID_RBV - bi - TRUE if this is a real state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:STATE:01:ACCL_RBV - ai - Acceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:01:ACCL - ao - Acceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:01:DCCL_RBV - ai - Deceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:01:DCCL - ao - Deceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:01:DELTA_RBV - ai - Max deviation from position at this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: DRVL 0.0 | io: output * - MFX:ATM:MMS:STATE:01:DELTA - ao - Max deviation from position at this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: DRVL 0.0 | io: output * - MFX:ATM:MMS:STATE:01:SETPOINT_RBV - ai - Axis position associated with this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:01:SETPOINT - ao - Axis position associated with this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:01:VELO_RBV - ai - Speed at which to move to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:01:VELO - ao - Speed at which to move to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:01:ENCODER_RBV - longin - Encoder count associated with this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: input * - MFX:ATM:MMS:STATE:01:NAME_RBV - waveform - Name of this position state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: input * - MFX:ATM:MMS:STATE:02:LOCKED_RBV - bi - TRUE if state is immutable - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:STATE:02:MOVE_OK_RBV - bi - TRUE if the move would be safe - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:STATE:02:VALID_RBV - bi - TRUE if this is a real state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:STATE:02:ACCL_RBV - ai - Acceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:02:ACCL - ao - Acceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:02:DCCL_RBV - ai - Deceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:02:DCCL - ao - Deceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:02:DELTA_RBV - ai - Max deviation from position at this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: DRVL 0.0 | io: output * - MFX:ATM:MMS:STATE:02:DELTA - ao - Max deviation from position at this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: DRVL 0.0 | io: output * - MFX:ATM:MMS:STATE:02:SETPOINT_RBV - ai - Axis position associated with this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:02:SETPOINT - ao - Axis position associated with this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:02:VELO_RBV - ai - Speed at which to move to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:02:VELO - ao - Speed at which to move to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:02:ENCODER_RBV - longin - Encoder count associated with this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: input * - MFX:ATM:MMS:STATE:02:NAME_RBV - waveform - Name of this position state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: input * - MFX:ATM:MMS:STATE:03:LOCKED_RBV - bi - TRUE if state is immutable - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:STATE:03:MOVE_OK_RBV - bi - TRUE if the move would be safe - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:STATE:03:VALID_RBV - bi - TRUE if this is a real state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:STATE:03:ACCL_RBV - ai - Acceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:03:ACCL - ao - Acceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:03:DCCL_RBV - ai - Deceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:03:DCCL - ao - Deceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:03:DELTA_RBV - ai - Max deviation from position at this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: DRVL 0.0 | io: output * - MFX:ATM:MMS:STATE:03:DELTA - ao - Max deviation from position at this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: DRVL 0.0 | io: output * - MFX:ATM:MMS:STATE:03:SETPOINT_RBV - ai - Axis position associated with this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:03:SETPOINT - ao - Axis position associated with this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:03:VELO_RBV - ai - Speed at which to move to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:03:VELO - ao - Speed at which to move to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:03:ENCODER_RBV - longin - Encoder count associated with this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: input * - MFX:ATM:MMS:STATE:03:NAME_RBV - waveform - Name of this position state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: input * - MFX:ATM:MMS:STATE:04:LOCKED_RBV - bi - TRUE if state is immutable - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:STATE:04:MOVE_OK_RBV - bi - TRUE if the move would be safe - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:STATE:04:VALID_RBV - bi - TRUE if this is a real state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:STATE:04:ACCL_RBV - ai - Acceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:04:ACCL - ao - Acceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:04:DCCL_RBV - ai - Deceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:04:DCCL - ao - Deceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:04:DELTA_RBV - ai - Max deviation from position at this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: DRVL 0.0 | io: output * - MFX:ATM:MMS:STATE:04:DELTA - ao - Max deviation from position at this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: DRVL 0.0 | io: output * - MFX:ATM:MMS:STATE:04:SETPOINT_RBV - ai - Axis position associated with this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:04:SETPOINT - ao - Axis position associated with this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:04:VELO_RBV - ai - Speed at which to move to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:04:VELO - ao - Speed at which to move to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:04:ENCODER_RBV - longin - Encoder count associated with this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: input * - MFX:ATM:MMS:STATE:04:NAME_RBV - waveform - Name of this position state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: input * - MFX:ATM:MMS:STATE:05:LOCKED_RBV - bi - TRUE if state is immutable - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:STATE:05:MOVE_OK_RBV - bi - TRUE if the move would be safe - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:STATE:05:VALID_RBV - bi - TRUE if this is a real state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:STATE:05:ACCL_RBV - ai - Acceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:05:ACCL - ao - Acceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:05:DCCL_RBV - ai - Deceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:05:DCCL - ao - Deceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:05:DELTA_RBV - ai - Max deviation from position at this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: DRVL 0.0 | io: output * - MFX:ATM:MMS:STATE:05:DELTA - ao - Max deviation from position at this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: DRVL 0.0 | io: output * - MFX:ATM:MMS:STATE:05:SETPOINT_RBV - ai - Axis position associated with this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:05:SETPOINT - ao - Axis position associated with this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:05:VELO_RBV - ai - Speed at which to move to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:05:VELO - ao - Speed at which to move to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:05:ENCODER_RBV - longin - Encoder count associated with this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: input * - MFX:ATM:MMS:STATE:05:NAME_RBV - waveform - Name of this position state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: input * - MFX:ATM:MMS:STATE:06:LOCKED_RBV - bi - TRUE if state is immutable - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:STATE:06:MOVE_OK_RBV - bi - TRUE if the move would be safe - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:STATE:06:VALID_RBV - bi - TRUE if this is a real state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: ONAM TRUE | field: ZNAM FALSE | io: input * - MFX:ATM:MMS:STATE:06:ACCL_RBV - ai - Acceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:06:ACCL - ao - Acceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:06:DCCL_RBV - ai - Deceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:06:DCCL - ao - Deceleration to use for moves to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:06:DELTA_RBV - ai - Max deviation from position at this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: DRVL 0.0 | io: output * - MFX:ATM:MMS:STATE:06:DELTA - ao - Max deviation from position at this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | field: DRVL 0.0 | io: output * - MFX:ATM:MMS:STATE:06:SETPOINT_RBV - ai - Axis position associated with this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:06:SETPOINT - ao - Axis position associated with this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:06:VELO_RBV - ai - Speed at which to move to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:06:VELO - ao - Speed at which to move to this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: output * - MFX:ATM:MMS:STATE:06:ENCODER_RBV - longin - Encoder count associated with this state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: input * - MFX:ATM:MMS:STATE:06:NAME_RBV - waveform - Name of this position state - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | array: 1..6 | expand: %.2d | io: input * - MFX:ATM:MMS:STATE:BUSY_RBV - bi - PRG_ATM.fbATM.fbStates.bBusy - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | field: ONAM True | field: ZNAM False | io: input * - MFX:ATM:MMS:STATE:DONE_RBV - bi - PRG_ATM.fbATM.fbStates.bDone - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | field: ONAM True | field: ZNAM False | io: input * - MFX:ATM:MMS:STATE:ERR_RBV - bi - PRG_ATM.fbATM.fbStates.bError - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | field: ONAM True | field: ZNAM False | io: input * - MFX:ATM:MMS:STATE:RESET_RBV - bi - PRG_ATM.fbATM.fbStates.bReset - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | field: ONAM True | field: ZNAM False | io: output * - MFX:ATM:MMS:STATE:RESET - bo - PRG_ATM.fbATM.fbStates.bReset - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | field: ONAM True | field: ZNAM False | io: output * - MFX:ATM:MMS:STATE:GET_RBV - mbbi - PRG_ATM.fbATM.fbStates.enumGet - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | io: input * - MFX:ATM:MMS:STATE:SET_RBV - mbbi - PRG_ATM.fbATM.fbStates.enumSet - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | io: output * - MFX:ATM:MMS:STATE:SET - mbbo - PRG_ATM.fbATM.fbStates.enumSet - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | io: output * - MFX:ATM:MMS:STATE:ERRID_RBV - longin - PRG_ATM.fbATM.fbStates.nErrorId - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | io: input * - MFX:ATM:MMS:STATE:ERRMSG_RBV - waveform - PRG_ATM.fbATM.fbStates.sErrorMessage - | _subitem_: {'arrStates': {'_pragma_': [('array', '1..6')]}} | io: input * - MFX:ATM:STC:01:CONN_RBV - bi - PRG_ATM.fbATM.fbThermoCouple1.bConnected - | field: ONAM Connected | field: ZNAM Disconnected | io: input * - MFX:ATM:STC:01:ERR_RBV - bi - PRG_ATM.fbATM.fbThermoCouple1.bError - | field: ONAM True | field: ZNAM False | io: input * - MFX:ATM:STC:01:TEMP_RBV - ai - PRG_ATM.fbATM.fbThermoCouple1.fTemp - | field: EGU C | field: PREC 2 | io: input * - MFX:SPEC:HOLDCUREN_RBV - bi - PRG_SPEC.bHoldingCurrentEnable - | io: output * - MFX:SPEC:HOLDCUREN - bo - PRG_SPEC.bHoldingCurrentEnable - | io: output