pcdsdevices.pump.PIPPLC

class pcdsdevices.pump.PIPPLC(prefix='', *, name, kind=None, read_attrs=None, configuration_attrs=None, parent=None, **kwargs)

Class for PLC-controlled Ion Pumps.

Newer class. This and below are still missing some functionality. Still need to work out replacement of old classes.

Ophyd Device Components

Attribute	Class	Suffix	Docs	Kind	Notes
pressure	EpicsSignalRO	:PRESS_RBV	pressure reading	hinted
high_voltage_do	EpicsSignalRO	:HV_DO_RBV	high voltage digital output	normal
high_voltage_in	EpicsSignalRO	:HV_DI_RBV	high voltage digital input	normal
interlock_ok	EpicsSignalRO	:ILK_OK_RBV	interlock is ok when true	normal
protection_setpoint	EpicsSignalWithRBV	:AT_VAC_SP	Protection/At Vacuum Setpoint	config
setpoint_hysteresis	EpicsSignalWithRBV	:SP_HYS	Protection Setpoint Hysteresis	config
pump_on_status	EpicsSignalRO	:HV_DI_RBV	ion pump output state	normal
pump_state	EpicsSignalRO	:STATE_RBV		hinted
at_vac_setpoint	EpicsSignalWithRBV	:AT_VAC_SP	at vacuum set point	omitted
high_voltage_switch	EpicsSignalWithRBV	:HV_SW	epics command to switch on the high voltage	config
plc_ai_offset	EpicsSignalRO	:AI_Offset_RBV	Analog input offset must match ion pump analog ouput offset. Default: 13	config
auto_on	EpicsSignalWithRBV	:Auto_On	Setting to automatically turn on the ion pump when thereference gauge pressure is below protection setpoint	config
override_status	EpicsSignalRO	:OVRD_ON	Regional Override Status	omitted
override_force_on	EpicsSignalWithRBV	:FORCE_START	Force Ion Pump to turn on	omitted
qpc_name	EpicsSignalRO	:VPCNAME	Quad Ion Pump Controller Name	config
qpc_pumpsize	EpicsSignalRO	:PUMPSIZE	Ion Pump Size (L/s)	config
interlock_device	EpicsSignalRO	:ILK_DEVICE_RBV	Vacuum device used for interlocking this pump	config
autoOn_countdown	EpicsSignalRO	:AutoOn_timer_RBV	Timer count down to turn on the ion pump	normal

Methods

configure(d: Dict[str, Any]) → Tuple[Dict[str, Any], Dict[str, Any]]

Configure the device for something during a run

This default implementation allows the user to change any of the configuration_attrs. Subclasses might override this to perform additional input validation, cleanup, etc.

Parameters:

d (dict) – The configuration dictionary. To specify the order that the changes should be made, use an OrderedDict.

Returns:

• (old, new) tuple of dictionaries

• Where old and new are pre- and post-configure configuration states.

describe() → OrderedDictType[str, Dict[str, Any]]

Provide schema and meta-data for read().

This keys in the OrderedDict this method returns must match the keys in the OrderedDict return by read().

This provides schema related information, (ex shape, dtype), the source (ex PV name), and if available, units, limits, precision etc.

Returns:

data_keys (OrderedDict) – The keys must be strings and the values must be dict-like with the event_model.event_descriptor.data_key schema.

get(**kwargs)

Get the value of all components in the device

Keyword arguments are passed onto each signal.get(). Components beginning with an underscore will not be included.

read() → OrderedDictType[str, Dict[str, Any]]

Read data from the device.

This method is expected to be as instantaneous as possible, with any substantial acquisition time taken care of in trigger().

The OrderedDict returned by this method must have identical keys (in the same order) as the OrderedDict returned by describe().

By convention, the first key in the return is the ‘primary’ key and maybe used by heuristics in bluesky.

The values in the ordered dictionary must be dict (-likes) with the keys {'value', 'timestamp'}. The 'value' may have any type, the timestamp must be a float UNIX epoch timestamp in UTC.

Returns:

data (OrderedDict) – The keys must be strings and the values must be dict-like with the keys {'value', 'timestamp'}

read_configuration() → OrderedDictType[str, Dict[str, Any]]

Dictionary mapping names to value dicts with keys: value, timestamp

To control which fields are included, change the Component kinds on the device, or modify the configuration_attrs list.

stop(*, success=False)

Stop the Device and all (instantiated) subdevices

summary()

trigger() → StatusBase

Trigger the device and return status object.

This method is responsible for implementing ‘trigger’ or ‘acquire’ functionality of this device.

If there is an appreciable time between triggering the device and it being able to be read (via the read() method) then this method is also responsible for arranging that the StatusBase object returned by this method is notified when the device is ready to be read.

If there is no delay between triggering and being readable, then this method must return a StatusBase object which is already completed.

Returns:

status (StatusBase) – StatusBase object which will be marked as complete when the device is ready to be read.

Attributes

configuration_attrs

connected

hints

kind

subscriptions: ClassVar[FrozenSet[str]] = frozenset({'acq_done'})