pcdsdevices.lasers.btps.BtpsSourceStatus

class pcdsdevices.lasers.btps.BtpsSourceStatus(prefix: str, source_pos: SourcePosition, **kwargs)

BTPS per-source shutter safety status.

Ophyd Device Components

Attribute	Class	Suffix	Docs	Kind	Notes
lss	LssShutterStatus	LST:	Laser Safety System Status	normal
entry_valve	BtpsVGC	VGC:01	Source entry valve	normal
linear (UnrelatedComponent)	SmarAct		Linear Smaract stage	normal
rotary (UnrelatedComponent)	SmarAct		Rotary stage	normal
goniometer (UnrelatedComponent)	SmarAct		Goniometer stage	normal
open_request	PytmcSignal	BTPS:UserOpen	User request to open/close shutter	normal
latched_error	PytmcSignal	BTPS:Error	Latched error	normal
acknowledge	PytmcSignal	BTPS:Acknowledge	User acknowledgement of latched fault	normal
override	PytmcSignal	BTPS:Override	BTPS advanced override mode	normal
lss_open_request	PytmcSignal	BTPS:LSS:OpenRequest	Output request to LSS open shutter	normal
safe_to_open	PytmcSignal	BTPS:Safe	BTPS safe to open indicator	normal
current_destination	PytmcSignal	BTPS:CurrentLD	BTPS-determined current laser destination	normal

Methods

check_move(dest: DestinationPosition) → None

Check for conflicts moving this source to dest.

Parameters:

dest (DestinationPosition) – The target destination for the source to move to.

Raises:

MoveError – Raises specific MoveError subclass based on the reason.

check_move_all(dest: DestinationPosition) → list[MoveError]

Check for conflicts moving this source to dest.

Parameters:

dest (DestinationPosition) – The target destination for the source to move to.

Returns:

list of MoveError – All conflicts along the motion trajectory.

configure(d: Dict[str, Any]) → Tuple[Dict[str, Any], Dict[str, Any]]

Configure the device for something during a run

This default implementation allows the user to change any of the configuration_attrs. Subclasses might override this to perform additional input validation, cleanup, etc.

Parameters:

d (dict) – The configuration dictionary. To specify the order that the changes should be made, use an OrderedDict.

Returns:

• (old, new) tuple of dictionaries

• Where old and new are pre- and post-configure configuration states.

describe() → OrderedDictType[str, Dict[str, Any]]

Provide schema and meta-data for read().

This keys in the OrderedDict this method returns must match the keys in the OrderedDict return by read().

This provides schema related information, (ex shape, dtype), the source (ex PV name), and if available, units, limits, precision etc.

Returns:

data_keys (OrderedDict) – The keys must be strings and the values must be dict-like with the event_model.event_descriptor.data_key schema.

get(**kwargs)

Get the value of all components in the device

Keyword arguments are passed onto each signal.get(). Components beginning with an underscore will not be included.

post_elog_status()

Post device status to the primary elog, if possible.

read() → OrderedDictType[str, Dict[str, Any]]

Read data from the device.

This method is expected to be as instantaneous as possible, with any substantial acquisition time taken care of in trigger().

The OrderedDict returned by this method must have identical keys (in the same order) as the OrderedDict returned by describe().

By convention, the first key in the return is the ‘primary’ key and maybe used by heuristics in bluesky.

The values in the ordered dictionary must be dict (-likes) with the keys {'value', 'timestamp'}. The 'value' may have any type, the timestamp must be a float UNIX epoch timestamp in UTC.

Returns:

data (OrderedDict) – The keys must be strings and the values must be dict-like with the keys {'value', 'timestamp'}

read_configuration() → OrderedDictType[str, Dict[str, Any]]

Dictionary mapping names to value dicts with keys: value, timestamp

To control which fields are included, change the Component kinds on the device, or modify the configuration_attrs list.

screen()

Open a screen for controlling the device.

Default behavior is the typhos screen, but this method can be overridden for more specialized screens.

set(dest: DestinationPosition, check: bool = True) → AndStatus

Move to the target destination and return a combined status for all motion.

classmethod set_defaults(*, connection_timeout=10.0)

Set class-wide defaults for device communications

This may be called only before any instances of Device are made.

This setting applies to the class it is called on and all its subclasses. For example,

>>> Device.set_defaults(...)

will apply to any Device subclass.

Parameters:

connection_timeout (float, optional) – Time (seconds) allocated for establishing a connection with the IOC.

Raises:

RuntimeError – If called after EpicsSignalBase has been instantiated for the first time.

set_nominal_to_current() → None

Set the nominal positions of the BTPS data store for the current destination to the current motor positions.

set_with_movestatus(dest: DestinationPosition, check: bool = True) → tuple[MoveStatus, MoveStatus, MoveStatus]

Move to the target destination and return statuses for each motion.

status() → str

Returns a str with the current pv values for the device.

stop(*, success=False)

Stop the Device and all (instantiated) subdevices

summary()

trigger() → StatusBase

Trigger the device and return status object.

This method is responsible for implementing ‘trigger’ or ‘acquire’ functionality of this device.

If there is an appreciable time between triggering the device and it being able to be read (via the read() method) then this method is also responsible for arranging that the StatusBase object returned by this method is notified when the device is ready to be read.

If there is no delay between triggering and being readable, then this method must return a StatusBase object which is already completed.

Returns:

status (StatusBase) – StatusBase object which will be marked as complete when the device is ready to be read.

Attributes

configuration_attrs

connected

connection_timeout

hints

kind

subscriptions: ClassVar[FrozenSet[str]] = frozenset({'acq_done'})

source_pos: SourcePosition