pcdsdevices.gauge.GFSPLC

class pcdsdevices.gauge.GFSPLC(prefix='', *, name, kind=None, read_attrs=None, configuration_attrs=None, parent=None, **kwargs)

Class for a fast shutter sensor gauge controlled by PLC.

Ophyd Device Components
Attribute	Class	Suffix	Docs	Kind	Notes
pressure	`EpicsSignalRO`	`:PRESS_RBV`	gauge pressure reading	hinted	Inherited from `GCCPLC`
gauge_at_vac	`EpicsSignalRO`	`:AT_VAC_RBV`	gauge is at VAC	normal	Inherited from `GCCPLC`
pressure_ok	`EpicsSignalRO`	`:PRESS_OK_RBV`	pressure reading ok	normal	Inherited from `GCCPLC`
at_vac_setpoint	`EpicsSignalWithRBV`	`:VAC_SP`	At vacuum setpoint for all gauges	config	Inherited from `GCCPLC`
state	`EpicsSignalRO`	`:STATE_RBV`	state of the gauge	hinted	Inherited from `GCCPLC`
high_voltage_on	`EpicsSignalWithRBV`	`:HV_SW`	command to switch the high voltage on	normal	Inherited from `GCCPLC`
high_voltage_disable	`EpicsSignalRO`	`:HV_DIS_DO_RBV`	enables the high voltage on the cold cathode gauge	normal	Inherited from `GCCPLC`
protection_setpoint	`EpicsSignalWithRBV`	`:PRO_SP`	Protection setpoint for ion gauges at which the gauge turns off	normal	Inherited from `GCCPLC`
setpoint_hysterisis	`EpicsSignalWithRBV`	`:SP_HYS`	Protection setpoint hysteresis	config	Inherited from `GCCPLC`
interlock_ok	`EpicsSignalRO`	`:ILK_OK_RBV`	Interlock is ok	normal	Inherited from `GCCPLC`
auto_on	`EpicsSignalWithRBV`	`:Auto_On`	Setting to automatically turn on the gauge when thereference gauge pressure is below protection setpoint	config	Inherited from `GCCPLC`
autoOn_countdown	`EpicsSignalRO`	`:AutoOn_timer_RBV`	timer count down to turn on the gauge	normal	Inherited from `GCCPLC`
fault_setpoint_FS	`EpicsSignalRO`	`:PSTATSPRBCK_FS`	Vacuum fault setpoint for Fast shutter valve	config

Methods

configure(d: Dict[str, Any]) → Tuple[Dict[str, Any], Dict[str, Any]]

Configure the device for something during a run

This default implementation allows the user to change any of the configuration_attrs. Subclasses might override this to perform additional input validation, cleanup, etc.

Parameters

d (dict) – The configuration dictionary. To specify the order that the changes should be made, use an OrderedDict.

Returns

(old, new) tuple of dictionaries
Where old and new are pre- and post-configure configuration states.

describe() → ophyd.device.OrderedDictType[str, Dict[str, Any]]

Provide schema and meta-data for read().

This keys in the OrderedDict this method returns must match the keys in the OrderedDict return by read().

This provides schema related information, (ex shape, dtype), the source (ex PV name), and if available, units, limits, precision etc.

Returns: data_keys (OrderedDict) – The keys must be strings and the values must be dict-like with the event_model.event_descriptor.data_key schema.

get(**kwargs)

Get the value of all components in the device

Keyword arguments are passed onto each signal.get(). Components beginning with an underscore will not be included.

read() → ophyd.device.OrderedDictType[str, Dict[str, Any]]

Read data from the device.

This method is expected to be as instantaneous as possible, with any substantial acquisition time taken care of in trigger().

The OrderedDict returned by this method must have identical keys (in the same order) as the OrderedDict returned by describe().

By convention, the first key in the return is the ‘primary’ key and maybe used by heuristics in bluesky.

The values in the ordered dictionary must be dict (-likes) with the keys {'value', 'timestamp'}. The 'value' may have any type, the timestamp must be a float UNIX epoch timestamp in UTC.

Returns: data (OrderedDict) – The keys must be strings and the values must be dict-like with the keys {'value', 'timestamp'}

read_configuration() → ophyd.device.OrderedDictType[str, Dict[str, Any]]

Dictionary mapping names to value dicts with keys: value, timestamp

To control which fields are included, change the Component kinds on the device, or modify the configuration_attrs list.

stop(*, success=False): Stop the Device and all (instantiated) subdevices

summary()

trigger() → ophyd.status.StatusBase

Trigger the device and return status object.

This method is responsible for implementing ‘trigger’ or ‘acquire’ functionality of this device.

If there is an appreciable time between triggering the device and it being able to be read (via the read() method) then this method is also responsible for arranging that the StatusBase object returned by this method is notified when the device is ready to be read.

If there is no delay between triggering and being readable, then this method must return a StatusBase object which is already completed.

Returns: status (StatusBase) – StatusBase object which will be marked as complete when the device is ready to be read.

Attributes

configuration_attrs

connected

hints

kind