pcdsdevices.attenuator.AttenuatorCalculator_AT2L0

class pcdsdevices.attenuator.AttenuatorCalculator_AT2L0(prefix, *, name, **kwargs)

Solid attenuator variant from the LCLS-II XTES project.

Parameters:

• prefix (str) – Full Solid Attenuator base PV.

• name (str) – Alias for the Solid Attenuator.

Ophyd Device Components

Attribute	Class	Suffix	Docs	Kind	Notes
calc_mode	EpicsSignal	:SYS:CalcMode	Floor or Ceiling calculation	config	Inherited from AttenuatorCalculatorBase
energy_source	EpicsSignal	:SYS:EnergySource	Use beamline photon energy or custom energy?	config	Inherited from AttenuatorCalculatorBase
energy_custom	EpicsSignal	:SYS:CustomPhotonEnergy	Custom energy to use for calculations [eV]	config	Inherited from AttenuatorCalculatorBase
energy_actual	EpicsSignalRO	:SYS:ActualPhotonEnergy_RBV	The reported beamline photon energy [eV]	normal	Inherited from AttenuatorCalculatorBase
actual_transmission	EpicsSignalRO	:SYS:ActualTransmission_RBV	Actual normalized transmission value	normal	Inherited from AttenuatorCalculatorBase
actual_transmission_3omega	EpicsSignalRO	:SYS:Actual3OmegaTransmission_RBV	Actual 3 omega normalized transmission value	normal	Inherited from AttenuatorCalculatorBase
desired_transmission	EpicsSignal	:SYS:DesiredTransmission	Desired normalized transmission value	normal	Inherited from AttenuatorCalculatorBase
last_energy	EpicsSignalRO	:SYS:LastPhotonEnergy_RBV	The photon energy used for the previous calculation; i.e., the one that goes along with best_config.	config	Inherited from AttenuatorCalculatorBase
best_config	EpicsSignalRO	:SYS:BestConfiguration_RBV	The best configuration of filters for the desired transmission	normal	Inherited from AttenuatorCalculatorBase
best_config_bitmask	EpicsSignalRO	:SYS:BestConfigurationBitmask_RBV	The best configuration of filters for the desired transmission.	normal	Inherited from AttenuatorCalculatorBase
best_config_error	EpicsSignalRO	:SYS:BestConfigError_RBV	Desired to calculated transmission error	normal	Inherited from AttenuatorCalculatorBase
active_config	EpicsSignalRO	:SYS:ActiveConfiguration_RBV	Where the filters are now	omitted	Inherited from AttenuatorCalculatorBase
active_config_bitmask	EpicsSignalRO	:SYS:ActiveConfigurationBitmask_RBV	Where the filters are now (as an integer)	normal	Inherited from AttenuatorCalculatorBase
filters_moving	EpicsSignalRO	:SYS:FiltersMoving_RBV	Filter-by-filter motion status (1 if moving)	normal	Inherited from AttenuatorCalculatorBase
filters_moving_bitmask	EpicsSignalRO	:SYS:FiltersMovingBitmask_RBV	Filter-by-filter motion status as a bitmask	normal	Inherited from AttenuatorCalculatorBase
run_calculation	EpicsSignal	:SYS:Run	Start the calculation	config	Inherited from AttenuatorCalculatorBase
apply_config	EpicsSignal	:SYS:ApplyConfiguration	Apply the best configuration (i.e., move the filters)	config	Inherited from AttenuatorCalculatorBase
moving	EpicsSignalRO	:SYS:Moving_RBV	Are filters being moved in/out?	config	Inherited from AttenuatorCalculatorBase
filters (DDC)	Filters	(See below)		normal

AttenuatorCalculator_AT2L0.filters (DDC) Dynamic Device Components

Attribute	Class	Suffix	Docs	Kind	Notes
filter_02	AttenuatorCalculatorFilter	:FILTER:02:		normal
filter_03	AttenuatorCalculatorFilter	:FILTER:03:		normal
filter_04	AttenuatorCalculatorFilter	:FILTER:04:		normal
filter_05	AttenuatorCalculatorFilter	:FILTER:05:		normal
filter_06	AttenuatorCalculatorFilter	:FILTER:06:		normal
filter_07	AttenuatorCalculatorFilter	:FILTER:07:		normal
filter_08	AttenuatorCalculatorFilter	:FILTER:08:		normal
filter_09	AttenuatorCalculatorFilter	:FILTER:09:		normal
filter_10	AttenuatorCalculatorFilter	:FILTER:10:		normal
filter_11	AttenuatorCalculatorFilter	:FILTER:11:		normal
filter_12	AttenuatorCalculatorFilter	:FILTER:12:		normal
filter_13	AttenuatorCalculatorFilter	:FILTER:13:		normal
filter_14	AttenuatorCalculatorFilter	:FILTER:14:		normal
filter_15	AttenuatorCalculatorFilter	:FILTER:15:		normal
filter_16	AttenuatorCalculatorFilter	:FILTER:16:		normal
filter_17	AttenuatorCalculatorFilter	:FILTER:17:		normal
filter_18	AttenuatorCalculatorFilter	:FILTER:18:		normal
filter_19	AttenuatorCalculatorFilter	:FILTER:19:		normal

Methods

calculate(transmission, *, energy=None, use_floor=True)

Calculate a blade configuration given a desired transmission value.

If energy is not specified, this method defaults to using the current L-line photon energy, as reported by the Photon Machine Protection System: PMPS:LFE:PE:UND:CurrentPhotonEnergy_RBV.

Parameters:

• transmission (float) – The desired transmission, in the range [0, 1].

• energy (float, optional) – The photon energy to use for the calculation.

• use_floor (bool, optional) – Select floor or ceiling transmission estimation. Defaults to floor.

configure(d: Dict[str, Any]) → Tuple[Dict[str, Any], Dict[str, Any]]

Configure the device for something during a run

This default implementation allows the user to change any of the configuration_attrs. Subclasses might override this to perform additional input validation, cleanup, etc.

Parameters:

d (dict) – The configuration dictionary. To specify the order that the changes should be made, use an OrderedDict.

Returns:

• (old, new) tuple of dictionaries

• Where old and new are pre- and post-configure configuration states.

describe() → OrderedDictType[str, Dict[str, Any]]

Provide schema and meta-data for read().

This keys in the OrderedDict this method returns must match the keys in the OrderedDict return by read().

This provides schema related information, (ex shape, dtype), the source (ex PV name), and if available, units, limits, precision etc.

Returns:

data_keys (OrderedDict) – The keys must be strings and the values must be dict-like with the event_model.event_descriptor.data_key schema.

get(**kwargs)

Get the value of all components in the device

Keyword arguments are passed onto each signal.get(). Components beginning with an underscore will not be included.

get_active_config(**kwargs)

Get the active filter configuration.

get_best_config(**kwargs)

Get the calculated (best) filter configuration.

get_moving_status(**kwargs)

Get the filter motion status.

post_elog_status()

Post device status to the primary elog, if possible.

read() → OrderedDictType[str, Dict[str, Any]]

Read data from the device.

This method is expected to be as instantaneous as possible, with any substantial acquisition time taken care of in trigger().

The OrderedDict returned by this method must have identical keys (in the same order) as the OrderedDict returned by describe().

By convention, the first key in the return is the ‘primary’ key and maybe used by heuristics in bluesky.

The values in the ordered dictionary must be dict (-likes) with the keys {'value', 'timestamp'}. The 'value' may have any type, the timestamp must be a float UNIX epoch timestamp in UTC.

Returns:

data (OrderedDict) – The keys must be strings and the values must be dict-like with the keys {'value', 'timestamp'}

read_configuration() → OrderedDictType[str, Dict[str, Any]]

Dictionary mapping names to value dicts with keys: value, timestamp

To control which fields are included, change the Component kinds on the device, or modify the configuration_attrs list.

screen()

Open a screen for controlling the device.

Default behavior is the typhos screen, but this method can be overridden for more specialized screens.

status() → str

Returns a str with the current pv values for the device.

stop(*, success=False)

Stop the Device and all (instantiated) subdevices

summary()

trigger() → StatusBase

Trigger the device and return status object.

This method is responsible for implementing ‘trigger’ or ‘acquire’ functionality of this device.

If there is an appreciable time between triggering the device and it being able to be read (via the read() method) then this method is also responsible for arranging that the StatusBase object returned by this method is notified when the device is ready to be read.

If there is no delay between triggering and being readable, then this method must return a StatusBase object which is already completed.

Returns:

status (StatusBase) – StatusBase object which will be marked as complete when the device is ready to be read.

Attributes

configuration_attrs

connected

first_filter = 2

hints

kind

num_filters = 18

subscriptions: ClassVar[FrozenSet[str]] = frozenset({'acq_done'})