pcdsdevices.state.PVStatePositioner

class pcdsdevices.state.PVStatePositioner(prefix, *, name, **kwargs)

A StatePositioner that combines a set of PVs into a single state.

The user can provide state logic and a move method if desired.

Parameters:

prefix (str) – The EPICS PV prefix for this motor.
name (str) – An identifying name for this motor.
settle_time (float, optional) – The amount of extra time to wait before interpreting a move as done.
timeout (float, optional) – The amount of time to wait before automatically marking a long in-progress move as failed.

_state_logic

Information dictionaries for each state of the following form:

{
  "signal_name": {
                   0: "OUT",
                   1: "IN",
                   2: "Unknown",
                   3: "defer"
                 }
}

The dictionary defines the relevant signal names and how to interpret each of the states. These states will be evaluated in the dict’s order, which may matter if _state_logic_mode == 'FIRST'.

This is for cases where the logic is simple. If there are more complex requirements, replace the state component.

Type:: dict

_state_logic_mode

This should be ‘ALL’ (default) if the pvs need to agree for a valid state. You can set this to ‘FIRST’ instead to use the first state found while traversing the _state_logic tree. This means an earlier state definition can mask a later state definition.

Type:: {‘ALL’, ‘FIRST’}

_state_logic_set_ref

An optional reference to the component that will be used to set some metadata on the state signal if provided.

Type:: str or None

Ophyd Device Components
Attribute	Class	Suffix	Docs	Kind	Notes
state	`PVStateSignal`			hinted

Methods

camonitor()

Shows a live-updating motor position in the terminal.

This will be the value that is returned by the position attribute.

This method ends cleanly at a ctrl+c or after a call to end_monitor_thread(), which may be useful when this is called in a background thread.

configure(d: Dict[str, Any]) → Tuple[Dict[str, Any], Dict[str, Any]]

Configure the device for something during a run

This default implementation allows the user to change any of the configuration_attrs. Subclasses might override this to perform additional input validation, cleanup, etc.

Parameters:

d (dict) – The configuration dictionary. To specify the order that the changes should be made, use an OrderedDict.

Returns:

(old, new) tuple of dictionaries
Where old and new are pre- and post-configure configuration states.

describe() → OrderedDictType[str, Dict[str, Any]]

Provide schema and meta-data for read().

This keys in the OrderedDict this method returns must match the keys in the OrderedDict return by read().

This provides schema related information, (ex shape, dtype), the source (ex PV name), and if available, units, limits, precision etc.

Returns:: data_keys (OrderedDict) – The keys must be strings and the values must be dict-like with the event_model.event_descriptor.data_key schema.

end_monitor_thread(): Stop a camonitor() or wm_update() that is running in another thread.

get(**kwargs)

Get the value of all components in the device

Keyword arguments are passed onto each signal.get(). Components beginning with an underscore will not be included.

get_state(value)

Given an integer or string value, return the proper state entry.

Returns:: state (~enum.Enum) – The corresponding Enum entry for this value. It has two meaningful fields, name and value.

move(position, moved_cb=None, timeout=None, wait=False)

Move to the desired state and return completion information.

Parameters:

position (int or str) – The enumerate state or the corresponding integer.
moved_cb (callable, optional) – Function to call at the end of motion. i.e. moved_cb(obj=self) will be called when move is complete.
timeout (int or float, optional) – Move timeout in seconds.
wait (bool, optional) – If True, do not return until the motion has completed.

Returns:

status (StateStatus) – Status object that represents the move’s progress.

mv(position, timeout=None, wait=False, log=True)

Absolute move to a position.

Parameters:

position – Desired end position.
timeout (float, optional) – If provided, the mover will throw an error if motion takes longer than timeout to complete. If omitted, the mover’s default timeout will be use.
wait (bool, optional) – If True, wait for motion completion before returning. Defaults to False.
log (bool, optional) – If True, logs the move at INFO level.

post_elog_status(): Post device status to the primary elog, if possible.

read() → OrderedDictType[str, Dict[str, Any]]

Read data from the device.

This method is expected to be as instantaneous as possible, with any substantial acquisition time taken care of in trigger().

The OrderedDict returned by this method must have identical keys (in the same order) as the OrderedDict returned by describe().

By convention, the first key in the return is the ‘primary’ key and maybe used by heuristics in bluesky.

The values in the ordered dictionary must be dict (-likes) with the keys {'value', 'timestamp'}. The 'value' may have any type, the timestamp must be a float UNIX epoch timestamp in UTC.

Returns:: data (OrderedDict) – The keys must be strings and the values must be dict-like with the keys {'value', 'timestamp'}

read_configuration() → OrderedDictType[str, Dict[str, Any]]

Dictionary mapping names to value dicts with keys: value, timestamp

To control which fields are included, change the Component kinds on the device, or modify the configuration_attrs list.

screen()

Open a screen for controlling the device.

Default behavior is the typhos screen, but this method can be overridden for more specialized screens.

set(position, moved_cb=None, timeout=None)

Move to the desired state and return completion information.

This is the bare-bones implementation of the move with only motion, callbacks, and timeouts defined. Additional functional options are relegated to the move command and bells and whistles are relegated to a different interface.

Parameters:

position (int or str) – The enumerate state or the corresponding integer.
moved_cb (callable, optional) – Function to call at the end of motion. i.e. moved_cb(obj=self) will be called when move is complete.
timeout (int or float, optional) – Move timeout in seconds.

Returns:

status (StateStatus) – Status object that represents the move’s progress.

status() → str: Returns a str with the current pv values for the device.

summary()

trigger() → StatusBase

Trigger the device and return status object.

This method is responsible for implementing ‘trigger’ or ‘acquire’ functionality of this device.

If there is an appreciable time between triggering the device and it being able to be read (via the read() method) then this method is also responsible for arranging that the StatusBase object returned by this method is notified when the device is ready to be read.

If there is no delay between triggering and being readable, then this method must return a StatusBase object which is already completed.

Returns:: status (StatusBase) – StatusBase object which will be marked as complete when the device is ready to be read.

wait(timeout=None)

wm(): Get the mover’s current positon (where motor).

wm_update()

Shows a live-updating motor position in the terminal.

This will be the value that is returned by the position attribute.

This method ends cleanly at a ctrl+c or after a call to end_monitor_thread(), which may be useful when this is called in a background thread.

Attributes

configuration_attrs

connected

egu = 'state'

high_limit

hints

kind

limits

low_limit

moving

Whether or not the motor is moving

Returns:: moving (bool)

position: Name of the positioner’s current state. If aliases were provided, the first alias will be used instead of the base name.

settle_time: Amount of time to wait after moves to report status completion

states_list = []

stop

Hide the stop method behind an AttributeError.

This makes it so that other interfaces know that the stop method can’t be run without needing to run it to find out.

subscriptions: ClassVar[FrozenSet[str]] = frozenset({'_req_done', 'acq_done', 'done_moving', 'readback', 'start_moving', 'state'})

timeout: Amount of time to wait before to considering a motion as failed